Pilagá wrote:
El Dom 10 Nov 2002 19:37, John Richard Smith escribió:Hey Suerte,
lm_sensors requires a slightly different collection of rpm packagesHola, John.
in M9.0 than in M8.2. Here is what I found to be necessary,
Mandrake9.0 lm_sensors install 10.11.02
=============================
CD1
===
liblm_sensors1-2.6.4-4mdk.i586.rpm
librrdtool0-1.0.38-3mdk.i586.rpm
CD2
===
liblm_sensors1-devel-2.6.4-4mdk.i586.rpm
CD3
===
liblm_sensors1-static-devel-2.6.4-4mdk.i586.rpm
CD1
===
lm_sensors-2.6.4-4mdk.i586.rpm
in that order.
the result was:-
[root@localhost root]# sensors
w83627hf-i2c-0-2d
Adapter: SMBus Via Pro adapter at 0400
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.72 V (min = +4.08 V, max = +4.08 V) ALARM
VCore 2: +1.24 V (min = +4.08 V, max = +4.08 V) ALARM
+3.3V: +3.31 V (min = +2.97 V, max = +3.63 V)
+5V: +5.07 V (min = +4.50 V, max = +5.48 V)
+12V: +12.31 V (min = +10.79 V, max = +13.11 V)
-12V: -12.03 V (min = -13.21 V, max = -10.90 V)
-5V: -5.17 V (min = -5.51 V, max = -4.51 V)
V5SB: +5.53 V (min = +4.50 V, max = +5.48 V) ALARM
VBat: +3.44 V (min = +2.70 V, max = +3.29 V) ALARM
fan1: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM
fan3: 3792 RPM (min = 3000 RPM, div = 2)
temp1: +33°C (limit = +60°C) sensor =
thermistor
temp2: +44.5°C (limit = +60°C, hysteresis = +50°C) sensor =
thermistor
temp3: +208.0°C (limit = +60°C, hysteresis = +50°C) sensor =
thermistor
vid: +1.850 V
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 0400
Algorithm: Non-I2C SMBus adapter
Memory type: DDR SDRAM DIMM SPD
SDRAM Size (MB): 512
which appears to be ok , the temp3 facility must be so dual cpu
processors are
catered for, and where a single processor is present as in my case it
puts some
ridiculous value in instead of something like `nothing detected'.
John
Take a look at /usr/share/doc/lm_sensors-2.6.4/doc/chips/w83781d, there you will find some useful info about your w83627hf chip.
Suerte.
I hadn't noticed that, one thing keeps bothering me , I don't actually
understand the term, Hysteresis value , and I haven't found an explanation
as to it's meaning so far , it's obviously something I need to find out about.
By the way does M9.0 still have a Webster's dictionary like M8.2 had, it
didn't automatically install, and I haven't had time to scan discs to see.
Anyone know ?
I should think it would be worthwhile for Mandrake to incorporate lm_sensors
into MCC under system , perhaps subcatagory sensors of something.
It's a basic system's function to track system temperatures, voltages,
and rpm's, and would benifit from being part of the base install.
John
--
John Richard Smith
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
