set eth0 to be the outside and eth1 to be the inside?
On Tuesday 31 December 2002 12:41 pm, Tom wrote: > 192.168.1.50 > 255.255.255.0 > 192.168.1.1 > > But if these were set wrong, then I should not be able to ping either nic > on the Mandrake router, and I can ping both of them, just cannot ping the > outside world, ie. the dns server, etc. So I'm thinking is is something in > the Mandrake box that is not allowing the internel network out. ----- > Original Message ----- > From: -=Eric=- > To: [EMAIL PROTECTED] > Sent: Tuesday, December 31, 2002 11:17 AM > Subject: Re: [newbie] Router/firewall > > > What's the IP address, subnet mask, & default gateway on the W2K machine? > ----- Original Message ----- > From: Tom > To: [EMAIL PROTECTED] > Sent: Tuesday, December 31, 2002 12:13 PM > Subject: Re: [newbie] Router/firewall > > > W2K is the OS but should that make any diference since this should just > be a router and not using the Mandrake box for anthing else. ----- Original > Message ----- > From: -=Eric=- > To: [EMAIL PROTECTED] > Sent: Tuesday, December 31, 2002 10:52 AM > Subject: Re: [newbie] Router/firwall > > > What OS is installed on the client computer? > > ----- Original Message ----- > From: Tom > To: [EMAIL PROTECTED] > Sent: Tuesday, December 31, 2002 11:47 AM > Subject: [newbie] Router/firwall > > > I am trying to setup a router/firewall. > Installed the nic > set eth0 to the 192.168.1.1 255.255.255.0 > set eth1 to the ISP static IP address and mask. > > Connected the computers . > I can ping anything from the Mandrake 9.0 box. > I can ping both nics in the Mandrake box from the client > I can ping the mandrake box eth1 from an outside computer > but I cannot get outside the from the client in the network. > I cannot ping the ISP's gateway or anthing else outside the eth1 > nic. > > What have a done wrong? > Thanks
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
