I you are running mandrake 8.0 look here : http://www.littlewhitedog.com/reviews_other_00022.asp
If you are running mandrake 9.0 note the following:
I have an ati NVIDIA tnt2 32mg agp card and it works just dandy with these drivers
NVIDIA_kernel-2.4.19-16mdk-1.0-3123.1mdk.i586.rpm ( you may have to look for this one.) <http://www.shockfamily.net/cedric/linux/NVIDIA_kernel-1.0-3123.i586.rpm>
NVIDIA_GLX-1.0-3123.i386.rpm <http://www.shockfamily.net/cedric/linux/NVIDIA_GLX-1.0-3123.i386.rpm>you may also need these as well
ftp://ftp.rutgers.edu/pub/mandrake/Mandrake/9.0/i586/Mandrake/RPMS/kernel-source-2.4.19-16mdk.i586.rpm
ftp://ftp.rutgers.edu/pub/mandrake/Mandrake/9.0/i586/Mandrake/RPMS/libncurses5-devel-5.2-27mdk.i586.rpm
follow these instructions very carefully :
install these rpm's from a console as root : rpm -ivh NVIDIA_kernel-2.4.19-16mdk-1.0-3123.1mdk.i586.rpm <http://www.shockfamily.net/cedric/linux/NVIDIA_kernel-1.0-3123.i586.rpm>
or the package manager, or MCC .do the same with the other NVIDIA driver , and the additional packages if needed.
edit your /etc/X11/XF86config-4 file using these instructions :
If you already have an XF86Config-4 file working with a different driver
(such as the 'nv' or 'vesa' driver), then all you need to do is find
the relevant Device section and replace the line:
Driver "nv"
(or Driver "vesa")
with
Driver "nvidia"
In the Module section, make sure you have:
Load "glx"
You should also remove the following lines:
Load "dri"
Load "GLcore"
if they exist. There are also numerous options that can be added to
the XF86Config file to fine-tune the NVIDIA XFree86 driver.
--
Mike McNeese Springdale, Arkansas USA
같같같같같같같같같같같같같같같같같같같같같같같같같같같같� Currently triple booting 98lite; MDK 8.0 kernel 2.4.3-20; MDK 9.0 kernel 2.4.19-16 Registered Linux User #248955
같같같같같같같같같같같같같같같같같같같같같같같같같같같같�
"If obstacles are what you see in your path...
Then you have lost sight of your goal! "
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
