I don't know, how do I tell? This is all very new to me.
Mark
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 23, 1999 12:12 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] SCSI card not recognized at boot
If the 'aha152x.....' line is in the conf.modules you shouldn't need it in
lilo.
Are you using an initrd image to specifically load it up on bootup ??
Martin.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mike Fieschko
> Sent: 23 September 1999 12:25
> To: [EMAIL PROTECTED]
> Subject: [newbie] SCSI card not recognized at boot
>
>
> >>> "Mark" == mshirley <[EMAIL PROTECTED]> writes:
>
> Mark> I have a PEL-1600 Scsi card for my CDR. It is supposed to
> Mark> use the AHA152x module. I did some research on the net, and
> Mark> found that somebody was able to get it working using the
> Mark> following command
>
> Mark> aha152x=0x340,10,7,1
>
> Mark> unfortunately, I don't know where to put this command. I
> Mark> want this card recognized at bootup everytime, and would
> Mark> like to not have to type this command in every time.
>
> Mark> I tried this in conf.modules, but it crashed the box.
>
> With those details,
>
> 0x340 is the card's address
>
> 10 is the IRQ it uses
>
> 7 is the SCSI ID for the card.
>
> So, is the card jumpered or set for 0x340, 10 and 7?
>
> My 1502 (which uses the 152x module) is set at 0x340,11,7
>
> So, in my lilo.conf:
>
> image=/boot/vmlinuz-2.2.9-19mdk
> label=linux
> root=/dev/hdb1
> append="aha152x=0x340,11,7,1"
> read-only
>
> and in conf.modules:
>
> alias scsi_hostadapter aha152x
> options aha152x aha152x=0x340,11,7,0
>
> Which seems to means that whether the last digit is 0 or 1 makes no
> difference to the card.
>
> Attached to the card are a Umax scanner, a Syquest EZ Drive
> and an old
> 500 Mb Fujitsu HD.
>
> --
> Mike Fieschko, West Orange, NJ, USA
> X-Mailer: XEmacs 21.1, VM 6.71 and random-sig.el
> X-Face header is me! http://www.cs.indiana.edu/picons/ftp/faq.html
> Kernel 2.2.13-9mdk mailto:[EMAIL PROTECTED]
> http://www.viconet.com/fieschko/home.htm
> Sep 23 St Linus or St Thecla or Blessed Padre Pio
> Rabboni, ut videam
>
