You'll find a precompiled mandrake adopted Device3Dfx, in the cooker
contrib section on your favorite mirrors.
http://www.linux-mandrake/cooker
PS. that srpm really really sucked before i got ahold of it.
On Sun, 3 Oct 1999, Patrick Putteman wrote:
> Hi,
>
> I had the same problem while rebuilding those src rpms for my Banshee. I
> solved it by first compiling my own kernel (wich is not a bad thing to do
> anyway, it can speed up things a lot by removing unnecessary modules,
> drivers,...).
> But first, edit the makefile of the kernel and remove the extraversion (or
> modify it) so that there is a clear difference between the original kernel
> (and the location of the modules) and the new one. Reboot the machine with
> the new kernel and retry the rebuild. It should work OK now as Linux wil
> have created a new modules.dep file. This is the one that gives problems
> during the rebuild process.
>
> Patrick
>
> ----- Original Message -----
> From: J.F. Glassmacher
> To: linux-mandrake mailing list
> Sent: Sunday, October 03, 1999 6:49 AM
> Subject: [newbie] mandrake 6.1 voodoo3 src.rpm problem
>
>
> All,
>
> I am trying to set up my voodoo3 in mandrake 6.1 linux. I think I got the 2d
> set up OK, but i cannot run the
> rpm --rebuild Device3Dfx...src.rpm
>
> I'm sure the errors are due to the fact that I'm using Mandrake not
> Redhat, the errors I'm getting are the following:
>
> Processing files: Device3Dfx
> Two files on one line: /lib/modules/2.2.13-7mdk/misc/wavefront.o:
> File must begin with "/":unresolved
> Two files on one line :/lib/modules/2.2.13-7mdk/misc/wavefront.o:
> File must begin with "/": symbol(s)
> Two files on one line:/lib/modules/2.2.13-7mdk/misc/eicon.o:
> File must begin with "/": unresolved
> Two files on one line: /lib/modules/2.2.13-7mdk/misc/eicon.o:
> File must begin with "/": symbol(s)
> PreReq: /bin/sh
>
>
> Thanks for the help
> jfJ.F. Glassmacher
> [EMAIL PROTECTED]
>
>
--
MandrakeSoft http://www.mandrakesoft.com/
--Axalon
