Hello, I was burning ISOs of redhat 8.0 to a cd using xcdroast and got this error:
cdrecord: WARNING: Drive returns wrong startsec (0)(using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 The burn completed but I'm wondering if the cd's are corrupted somehow. So far I've burned 2 of the 5 ISOs and both produced this error. I'd appreciate it if anyone could clue me in on what's going on and advise me should I try to install redhat with them or paint reindeer on them and set them around the coffee table at Christmas? Thanks, Scott Here's the complete output: Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,3,0" fs=4096k driveropts=burnfree -v -useinfo speed=12 -dao -eject -pad -data "/home/scott/redhat8/psyche-i386-disc2.iso" ... scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 pregap1: -1 Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.6' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'MSI ' Identifikation : 'CD-RW MS-8332 ' Revision : '150D' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1806336 = 1764 KB FIFO size : 4194304 = 4096 KB Track 01: data 635 MB padsize: 30 KB Total size: 729 MB (72:17.90) = 325343 sectors Lout start: 730 MB (72:19/68) = 325343 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11835 (97:24/15) ATIP start of lead out: 337350 (75:00/00) speed low: 0 speed high: 4 power mult factor: 3 5 recommended erase/write power: 3 A2 values: 56 43 23 Disk type: Phase change Manuf. index: 24 Manufacturer: SONY Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 12007 Starting to write CD/DVD at speed 4 in real SAO mode for single session. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: writing 30 KB of pad data. Track 01: Total bytes read/written: 666271744/666302464 (325343 sectors). Writing time: 1086.080s Fixating... Trouble flushing the cache cdrecord: Input/output error. flush cache: scsi sendcmd: no error Fixating time: 51.941s CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 51.939s timeout 200s Average write speed 4.0x. cdrecord: fifo had 10495 puts and 10495 gets. Min drive buffer fill was 96% cdrecord: fifo was 0 times empty and 10430 times full, min fill was 98%.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com