On Thursday 11 December 2003 12:01 pm, Nestor Castro wrote: > H.J.Bathoorn wrote: > >On Thursday 11 December 2003 11:53, Nestor Castro wrote: > > > ><whaaaaaaaaaaaaaaaaaaaaaang!!!!> (chainsaw snipping;)) > > > >>* > >>Thanks Again for your time and patience. > >> > >>Nestor > >>* > > > >1)Can you ping the other boxes on your subnet? > > yeaa, that, I can do > > >If so does it work using their names as well? > > noop > > >2)Can you ping the internet using IP addresses? > > that`s also a No > > >66.102.11.99 (google) for instance. > > > >Good luck, > >HarM > > damn, that chainsaw is getting dangerously close. > > I`ll atach a diagram of how my LAN is connected, and see if this helps > you guys get a better perspective. > > Thanks. > > Nestor. > > >------------------------------------------------------------------------ > > > >Want to buy your Pack or Services from MandrakeSoft? > >Go to http://www.mandrakestore.com I don't get it, if you have a line into the linux comp and a line out then you have to have two nic cards eth0 and eth1 in order to connect two cables to that computer. If that is the case then you have one nic that is not functioning. So if one is a built in to the motherboard it would seem that it may need to be activated in the bios. If it is active it should show up when you do "ifconfig" in console. Also you should see the active light on the back of the comp in two places. Something is missing or am I just daft? -- Dennis M. linux user #180842
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
