On Thursday 15 July 2004 18:09, Marco Verheul wrote: > On Thu, 2004-07-15 at 00:19, Stephen Kuhn wrote: > > On Thu, 2004-07-15 at 05:51, Marco Verheul wrote: > > > Hi all, > > > > > > I just made the jump to 10.0 last weekend . All went very > > > smoothly, but unfornunately I still have no sound. I was hoping > > > that it would get it working with a fresh full install, but no.. > > > (didn't work in 9.1 either). > > > > > > In Mandrake Control Center I see that 2 soundcards are detected: > > > > > > VT82C686 [Apollo Super AC97/Audio] > > > Vendor: âVIA Technologies > > > Alternative drivers: âvia82cxxx_audio > > > Bus: âPCI > > > Bus identification: â1106:3058:1106:4511 > > > Location on the bus: â0:7:5 > > > Description: âVT82C686 [Apollo Super AC97/Audio] > > > Module: âsnd-via82xx > > > Media class: âMULTIMEDIA_AUDIO > > > > > > CT5880 > > > Vendor: âEnsoniq > > > Alternative drivers: âsnd-ens1371 > > > Bus: âPCI > > > Bus identification: â1274:5880:1274:8001 > > > Location on the bus: â0:b:0 > > > Description: âCT5880 > > > Module: âes1371 > > > Media class: âMULTIMEDIA_AUDIO > > > > > > I'm supposed to have a Sound blaster 4.1 digital (creative) > > > installed. I hope somebody can give me some clues on how to get > > > things started. > > > > > > Marco > > > > Is your sound built into the motherboard (as it does kinda show) or > > is your Soundblaster a peripheral? (a card stuck in a slot) - if > > you DO have a Soundblaster card stuck in a slot, you might want to > > go into your BIOS and disable the onboard sound...I've had 50/50 > > with onboard VIA sound drivers... > > > > stephen kuhn - proprietor > > Stephen, > > I do have a card stuck in a slot. I disabled the onboard sound. As a > result I got a sound icon in the panel which wasn't there before, so > I guess there is some sort of recognition (but still no sound). > > I tried to configure the sound system in: > > System -> configuration -> KDE -> sound -> sound system > > On the first tab I accepted the defaults. On the second I selected > autodetect and checked "Full duplex". When I hit the apply button I > get the error: > > "Sound server informational message: > Error while initializing the sound driver: > device /dev/dsp can't be opened (No such file or directory) > The sound server will continue, using the null output device." > > I really could use any good ideas. Thanks! > > Marco
I don't think a sounddriver is loaded. You can check with '/sbin/lsmod'. If no driver is loaded you should try to configure your card in MCC, I would first try the snd-ens1371 module. HTH, -Frans
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________