yep...I know it's a 3c905B card...
and I looked through the documentation again and didn't see anything of
help. One thing I'm confused about,however: if it is the IRQ etc., how do i
change that? (I have win98 too)
Thanks
Dave
-----Original Message-----
From: flupke [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 03, 2000 5:07 AM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] DHCP...
there is a task manager called ktop. It seems that it's what you need.
About your 3com card : are you sure this is the module you need?
Is there anything mentionned about that in your card's documentation?
Dave wrote :
> insmod 3c509 gives me
> ./3c509.o: init_module: Device or resource busy
> ....sorry to have so little to go on, but I have no way of figuring out
what
> tto do next.
> (on a side note, is there a taskmanager or ctrl+alt+del equivalent in
linux?
> I know that there is ps, but anything else (especially if it is accesible
in
> KDE))?
> Thanks
> Dave
>
> >>>>>>>>>
> have you tried a insmod 3c509 ??
> does not look like the mod for the nic is loaded (hence the no eth0 in
> ifconfig)
> after you try the insmod (and get no errors ) try a modprobe 3c509
> and then a ifconfig if you then see a eth0 ... BINGO
> you can go into linuxconf and edit eth0 to use the 3c509 modual and dhcp
> protocol.
> after you save and exit linuxconf try ifconfig again you should see eth0,
> if no do a ifup eth0
>
> Regards,
> ROn
