Hi Charles,
I read all of that and thank you for sending it, what I found was what I
think may be a little unusual?
When I did
cat /proc/pci
as root I got the following;
Bus 0, device 9, function 0:
Multimedia Audio controller:
Unknown Vendor Unknown device (rev 254)
Vendor id=12eb. device id=2.
Medium devsel. Fast back-to-back capable. IRQ 12.
Master Capable. Latency=32. Min Gnt=4. Max Lat=12.
Non-prefetchable 32 bit memory at 0xde800000 [0xde800000].
I/O at 0xb000 [0xb001]
I/O at 0xa800 [0xa801]
followed by;
Bus 0, device 11, function 0:
Serial controller: Unknown vendor Unknown device (rev1)
vendor id=127a. device id=1005.
medium devsel. Fast back-to-back capable. IRQ 10.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xde000000 [0xde000000]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
with no - I/O
I am not certain which of the following are my modem, it almost appears
that neither are. I almost get the feeling that it is
'device 11' which also appears to be somewhat undefined?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
when I did;
setserial /dev/ttyS3 port 0xb000 spd_vhi skip_test auto_irq autoconfig
as per 'device 9' above
I get;
Cannot set serial info: Device or resource busy
Sounds like what kppp says?
Thanks for all of your help,
b/web
Wade
At 08:24 AM 5/5/00 -0400, you wrote:
>Wade
>Sorry about the attachment.
>Try this link http://www.actiontec.com/support/modems/cwifaq.html
>
>Charles
>----- Original Message -----
>From: <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Thursday, May 04, 2000 10:08 PM
>Subject: Re: [newbie] modem/internet connection/cdrom2
>
>
>> Hi Charles,
>>
>> Thanks, and yes my modem is a PCI so back to ttyS3. I would like to read
>> your attachmment but was not able to open that mime type?
>>
>> b/web
>> Wade
>>
>>
>> At 09:04 AM 5/4/00 -0400, you wrote:
>> > Wade what interface is your modem? If it is a PCI modem you have to
>set
>> >it up as ttyS3. Charles Attachment Converted:
>> >"c:\tscnet\eudora\attach\smime15.p7s"
>>
>>
>
>
>
