Hi Rich,
A group of developers at Sourceforge are maintaining the driver for this
card. It uses the 8830 chip. Try this site for info:
http://sourceforge.net/projects/aureal/
HTH,
Cindy
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Rich
Sent: Monday, September 18, 2000 7:42 PM
To: [EMAIL PROTECTED]
Subject: [newbie] How get TBS Montego II Sound Card to Work
Hi all,
I'm trying to get my TBS Montego II Sound Card to work. It came with my
Dell system 1 year ago. I've run 'sndconfig' and tried setting it to all
the Sound Blaster types which didn't work. (see details below.) In
'sndconfig' I also tried setting it to a different Turtle Beach System (TBS)
sound card and got a message to ftp down a file but I didn't think that
would work since its not the proper sound card(see details below).
So, do I need a driver specifically for my sound card?
Any idea where I could find the driver?
Thanks,
Rich [EMAIL PROTECTED]
DETAILS:
--------------------------------------
WINDOWS 98 Reports the following for my sound card:
TBS Montego II Sound Blaster Pro Emulation
Input/Output Range 0220-033F
Interrupt Request 05
Direct Memory Access 01
Direct Memory Access 03
Input/Output Range 0388-038B
TBS Montego II PCI Audio
Memory Range F4000000-F403FFFF
Interrupt Request 10
Input/Output Range 1038-103F
Input/Output Range 1030-1037
TBS Montego II MPU-401 Interface
Input/Output Range 0330-033F
TBS Montego II Gameport Interface
Input/Output Range 0201-0201
--------------------------------------
When I run "sndconfig --noprobe" I choose "Soundblaster Pro" with the
following "Card Settings":
IRQ 5
DMA 1
I/O Port 0x220
I/O Port 0x240
I receive the following error:
MODPROBE ERRORS
The following error occurred running the modprobe program:
/lib/modules/2.2.15-4mdk/misc/sb.o: init_module: Device or resource busy
/lib/modules/2.2.15-4mdk/misc/sb.o: insmod
/lib/modules/2.2.15-4mdk/misc/sb.o: failed
/lib/modules/2.2.15-4mdk/misc/sb.o: insmod sound-slot-0 failed
--------------------------------------
When I run "sndconfig" with out any options it says:
"A PCI Sound card was foundon your system. Model Aureal
Semiconducctor/Vortex2 is not supported.
--------------------------------------
When I run "sndconfig --noprobe" and if I choose either of the following
sound cards to configue, I receive the message listed below it.
Turtle Beach Multisound classic/Monterey/Tahiti
Turtle Beach Multisound Pinnacle/Fiji
To use the synthesizer on the cards, you need to obtain the firmware files.
Download to /tmp and unzip the following file from Tutle Beach:
ftp://ftp.tbeach.com/pub/tbs/msndcl/msndvkit.zip
When unzipped, unzip the file name MsndFiles.zip.
--------------------------------------
Below is my file /etc/conf.modules
alias scsi_hostadapter1 ide-scsi
post-install usb-storage modprobe usbkbd; modprobe keybdev
alias scsi_hostadapter usb-storage
alias parport_lowlevel parport_pc
pre-install plip modprobe parport_pc ; echo 7 > /proc/parport/0/irq
alias block-major-11 scsi_hostadapter
alias usb-interface usb-uhci
pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
post-install supermount modprobe scsi_hostadapter ; modprobe
scsi_hostadapter1
options msnd_classic io=0x3e0 irq=10 mem=0xe8000
post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2
options msnd_pinnacle io=0x3e0 irq=10 cfg=0x250 mpu_io=0x330 mpu_irq=5
mem=0xb0000
options adlib_card io=0x388
alias sound-slot-0 sb
options sound dmabuf=1
alias midi opl3
options opl3 io=0x388
options sb io=0x220 irq=5 dma=1
--------------------------------------
Below is my file "/proc/pci":
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (rev 3).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xf8000000 [0xf8000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
Medium devsel. Master Capable. Latency=128. Min Gnt=140.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0x1020 [0x1021].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable.
Latency=64.
I/O at 0x1000 [0x1001].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 14, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 254).
Vendor id=12eb. Device id=2.
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
Latency=64. Min Gnt=4.Max Lat=12.
Non-prefetchable 32 bit memory at 0xf4000000 [0xf4000000].
I/O at 0x1038 [0x1039].
I/O at 0x1030 [0x1031].
Bus 0, device 16, function 0:
Serial controller: Unknown vendor Unknown device (rev 1).
Vendor id=12b9. Device id=1008.
Medium devsel. IRQ 9.
I/O at 0x1040 [0x1041].
Bus 1, device 0, function 0:
VGA compatible controller: 3Dfx Unknown device (rev 1).
Vendor id=121a. Device id=5.
Fast devsel. Fast back-to-back capable. IRQ 11.
Non-prefetchable 32 bit memory at 0xf6000000 [0xf6000000].
Prefetchable 32 bit memory at 0xfc000000 [0xfc000008].
I/O at 0x9000 [0x9001].
--------------------------------------
Below is my file "/proc/interrupts":
CPU0
0: 37867 XT-PIC timer
1: 581 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
12: 1591 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 9125 XT-PIC ide0
15: 12 XT-PIC ide1
NMI: 0
--------------------------------------
Below is my file "/proc/ioports":
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
1020-1027 : ide0
1028-102f : ide1
1040-1047 : serial(set)
--------------------------------------