I refuse to use the mandrake control center for setting up network or dialup.. it makes to many assumptions.. like that I wanted to setup dymanicIP instead of manually giving my machines at home IP address statically..
I have 3 PC's and the linux box at home, thats hardly enough to warrent dhcp you are better off with linux conf for your network connections, then edit the /etc/sysconfig files to enable nat and stuff.. then load a firewall that can do the nat for you, (gShield is a good one) or just add the rules to the end of rc.local if you like. much easier then dicking around with the mandrake center. rgds Frank -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Matt Greer Sent: Thursday, 6 December 2001 6:22 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [newbie] Network question....I think. On Wednesday 05 December 2001 11:57 am, you wrote: > Hello again, > > Okay, I'm new to the Linux world but want to become dangerous. I am also > new to the world of Networking, but I'm still building my courage in that > field! I have a dual boot system up and running with Win'98 and LM 8.1. On > the Win'98 side I have my machine networked with two D-Link DFE-530TX+ > cards with the wifes machine across the other side of the room. She has > Win'98 installed also. I have the printer connected to her machine, and we > have Internet Connection Sharing setup also. I want to be able to print to > the printer, access her computer, and share the Internet connection from > inside Linux Mandrake 8.1 here on my machine. Can this be done? Someone > told me to go buy a big book on Samba! I told him to go stick it, real men > don't dance! Where do I start??? Your computer has two NICs? One for the internet and one that's going over to your wife? Setting up NAT (network address translation. Otherwise known as internet connection sharing) with Mandrake is very easy. There appears to be a bug in 8.1 that complicates this just a tad. For me I had to remove my NIC that is feeding my internal network, and set up my internet connection with the other NIC. You may or may not have to do this. Once the net connection is going, I replaced the NIC I removed (removed and replace it with the computer off of course). Run harddrake (mandrake control center -> hardware - > hardware) and confirm the second NIC has been recognized. Now, still in the Mandrake control center, go over to network -> connection sharing. It should tell you it is about to set up connection sharing on eth1 (the second NIC). Just follow the wizard, you will probably need to install some stuff off of your mandrake cds. It will then set it up so other computers can access your internet connection via dhcp. On your wife's computer go to control panel -> network. Find the TCP/IP entry for her network card and select "properties", then "IP address" tab. Now select "obtain IP address automatically", reboot her computer. She should be up and running sharing the net with you. This is by far the easiest way to do it. But the mandrake wizard does it via dhcp and I didn't like having both the dhcp daemon and the dns daemon (named) running on my machine. They took more resources than I liked. I also thought dynamic addresses would complicate other aspects of my network needlessly. So I redid it with static IP addresses, eliminating dhcp. Also, it's really ideal to have a third computer be your network's gateway. It can run NAT, the firewall, the local name server, samba, etc and do just that, taking the burden off your computer. That's how I will do it once I find another computer to use. But for now, one step at a time. Get this far and you'll be doing well. Matt _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
