understood, sorry for confusing the issue :-) rgds
Frank -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll Grigsby Sent: Tuesday, 28 May 2002 2:24 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci Frank: What I meant was the some Lucent-based modems will work under Linux, but other Lucent-based modems won't -- it depends on the specific Lucent chipset. Part of Alan's problem is that Mandrake identifies the modem as a 3Com, but Windows says its a Lucent. His best hope is that Windows is right, and Mandrake is wrong (well, it COULD happen -- yeah, right), and that he's got one of the Lucent chipsets that will work. OTOH, perhaps he got some bad information about the 3Com modem; he can check that out at the address that I gave him. Sorry for the confusion. -- cmg On Monday 27 May 2002 01:24 pm, Franki wrote: > not true... lucent is not the only one.. > > conexant hsf and hcf modems work in linux as well, in fact they have rpm's > designed specifically for mandrake 8.1 and 8.2. > > > rgds > > Frank > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll Grigsby > Sent: Tuesday, 28 May 2002 12:57 AM > To: [EMAIL PROTECTED] > Subject: Re: [newbie] cannot get modem device ID with cat /proc/pci > > On Sunday 26 May 2002 02:23 pm, you wrote: > > Hi, I'm using Mandrake on two computers. On the first, with cat > > /proc/pci, I got vendor and device ID's of the communications controller: > > > > Communication controller: PCI device 10b7:1007 (3Com Corporation) > > (rev 16). > > > > Using this, I was able to search the WinModem docs on the Web and > > conclude that my modem doesn't work under Linux. > > > > On the second computer, Windows calls the PCI modem "Lucent WinModem", > > and cat /proc/pci returns the bus number, IRQ, and > > Communications Controller Lucent Microelectronics 56k WinModem (rev 1). > > > > No vendor or device ID. I've heard people can maybe use some Lucent > > modems, > > > but how can I tell which driver I need? > > > > Alan > > Alan: > The first thing to do is to find out exactly what modem you have. Linux > drivers have been written for some Lucent chipsets, but others are > not going to work. The best way to ID your modem is to open up the box and > look at the modem. Note the FCC number, and any part numbers that are on > the Lucent or whatever chip. You can go to www.fcc.gov.oet/fccid/ and > determine the manufacturer and model number. Your next stop should be > www.idir.net/~gromitkc/winmodem.html. Part way down the page, click on the > Download Entire Table link and run a search for the FCC number. If that > doesn't work, try searching for Lucent. You'll also find links to other > information about Lucent-based modems on the first page. > Good luck, > -- cmg
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com