Thank you for your response. I ended up going back to an original system (whole new computer)and re-installed everything from scratch. Now when I enable Nistnet, I get an interrupt fired at 8192Mhz from the RTC and it just continually loops.
Bob James -----Original Message----- From: David Morris [mailto:[EMAIL PROTECTED] Sent: Sunday, January 07, 2007 7:05 PM To: James, Bob Cc: nistnet@antd.nist.gov Subject: Re: [nistnet] Performance issues with NIST Net Bandwidth Check your system performance with nistnet turned off. Make sure you have the nistnet RTC correctly built and installed. If the kernel isn't configured with a rtc as a module ... that is probably needed. On Tue, 2 Jan 2007, James, Bob wrote: > Hi, > > > > I am having an issue running Nist Net on Ubuntu 5.10. > > > > It runs correctly, but when I set it up to throttle traffic at T1 > speeds, it crawls at about 200 bytes/s. I have found this behavior on > both the cnistnet and xnistnet. The configuration is router to Nist > server to router, routing is setup correct and I know I must be missing > something simple. > > > > Thanks in advance. > > > > Bob > > > > _______________________________________________ nistnet mailing list nistnet@antd.nist.gov http://www-x.antd.nist.gov/mailman/listinfo/nistnet