Hi everybody, I am using Nistnet with FIFO patch, it rectify the reorder of packets. But, when i measure the jitter with Iperf tool, the measure result is not correlation to the jitter parameter setted in the Nistnet command line. for example, in the Nistnet command line, the jitter is 50ms, the measure result of Iperf is about 20ms, but when the jitter is 500ms, the measure result of Iperf is still about 20ms or even less than 20ms. but when i turn off the FIFO path, the measure result of Iperf is close to the jitter value of command line for Nistnet. thanks for help!
Best Regards! Shirley 熊礼霞/Shirley 华为技术有限公司 北京研究所 Huawei Technologies Co., Ltd. Beijing Department tel: 010-82836120 cell: 13466690531 ---------------------------------------------------------------------------- --------------------------------------------------------- 本邮件及其附件含有华为公司的保密信息,仅限于发送给上面地址中列出的个人或群 组。禁 止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制、或散发)本邮 件中 的信息。如果您错收了本邮件,请您立即电话或邮件通知发件人并删除本邮件! This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
<<attachment: aleabanr.gif>>
<<attachment: Leaves Bkgrd.jpg>>
_______________________________________________ nistnet mailing list nistnet@antd.nist.gov http://www-x.antd.nist.gov/mailman/listinfo/nistnet