RHINO(8)
========

NAME
----
apcbzbr - Driver for Brazilian APC UPS equipment

NOTE
----
This man page only documents the hardware-specific features of 
Microsol driver.  For information about the core driver, see
linkman:nutupsdrv[8].

SUPPORTED HARDWARE
------------------
  
 * PS350_CII
 * PS800 
 * STAY1200
 * BZ1200
 * PS2200
 * PS2200 220V
 * STAY700
 * BZ1500

See Rhino and Solis drivers for other Microsol models.

EXTRA ARGUMENTS
---------------

This driver support the following extra optional settings in
linkman:ups.conf[5]:

*battery_extension = n* - (default = 0, no extra battery, where n = Ampere*hour )
*time_on = HH:MM* (Time to power on the UPS)
*time_off = HH:MM* (Time to power off the UPS)
*daysofweek = 1010101* (Days of the week to power up/down the UPS. It consists of 7 numbers corresponding to Sunday through Saturday. Number 1 is used to set the active days)
*clockupdate = n* (Number of seconds between each clock update)

COMMANDS
--------

 * load.on  - Turn on the load immediately

 * load.off - Turn off the load immediately

 * test.failure.start - Put the UPS in input failure mode

 * test.failure.stop  - Put the UPS out of input failure mode

 * shutdown.stayoff - Shut down in 3 minutes and do not return

AUTHOR
------
Carlos Eduardo P. Guidugli <guidugli@gmail.com>

SEE ALSO
--------

The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]

Internet resources:
~~~~~~~~~~~~~~~~~~~
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
