via-chrome-tool (C) 2009 by VIA Technologies, Inc.
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY

Sequencer register dump:
    0x00 = 0x03 (Reset)
    0x01 = 0x01 (Clocking Mode)
    0x02 = 0x0f (Map Mask)
    0x03 = 0x00 (Character Map Select)
    0x04 = 0x0e (Memory Mode)
    0x10 = 0x01 (Extended Register Unlock)
    0x11 = 0x78 (Configuration 0)
    0x12 = 0x00 (Configuration 1)
    0x13 = 0x00 (Configuration 2 (DVP1 strapping))
    0x14 = 0x00 (Frame Buffer Size Control)
    0x15 = 0xae (Display Mode Control)
    0x16 = 0x80 (Display FIFO Threshold Control)
    0x17 = 0xc7 (Display FIFO Control)
    0x18 = 0x70 (Display Arbiter Control 0)
    0x19 = 0x7f (Power Management)
       0x01 CPU Interface Clock Control: 0x01
       0x02 Display Interface Clock Control: 0x02
       0x04 MC Interface Clock Control: 0x04
       0x08 Typical Arbiter Interface Clock Control: 0x08
       0x10 AGP Interface Clock Control: 0x10
       0x20 P-Arbiter Interface Clock Control: 0x20
       0x40 MIU/AGP Interface Clock Control: 0x40
    0x1a = 0x18 (PCI Bus Control)
    0x1b = 0xf0 (Power Management Control 0)
       0x01 Primary Display's LUT Off: 0x00
       0x18 Primary Display Engine VCK Gating: 0x10
       0x60 Secondary Display Engine LCK Gating: 0x60
    0x1c = 0xa4 (Horizontal Display Fetch Count Data)
    0x1d = 0x00 (Horizontal Display Fetch Count Control)
    0x1e = 0x31 (Power Management Control)
       0x01 ROC ECK: 0x01
       0x02 Replace ECK by MCK: 0x00
       0x08 Spread Spectrum: 0x00
       0x30 DVP1 Power Control: 0x30
       0xc0 VCP Power Control: 0x00
    0x20 = 0x00 (Typical Arbiter Control 0)
    0x21 = 0x18 (Typical Arbiter Control 1)
    0x22 = 0x10 (Display Arbiter Control 1)
    0x26 = 0x3d (IIC Serial Port Control 0)
    0x2a = 0x00 (Power Management Control 5)
       0x03 LVDS Channel 1 Pad Control: 0x00
       0x0c LVDS Channel 2 Pad Control: 0x00
       0x40 Sprad Spectrum Type FIFO: 0x00
    0x2b = 0x00 (LVDS Interrupt Control)
       0x01 MSI Pending IRQ Re-trigger: 0x00
       0x02 CRT Hot Plug Detect Enable: 0x00
       0x04 CRT Sense IRQ status: 0x00
       0x08 CRT Sense IRQ enable: 0x00
       0x10 LVDS Sense IRQ status: 0x00
       0x20 LVDS Sense IRQ enable: 0x00
    0x2c = 0xdc (General Purpose I/O Port)
    0x2d = 0xff (Power Management Control 1)
       0x03 ECK Pll Power Control: 0x03
       0x0c LCK PLL Power Control: 0x0c
       0x30 VCK PLL Powre Control: 0x30
       0xc0 E3_ECK_N Selection: 0xc0
    0x2e = 0xff (Power Management Control 2)
       0x03 Video Playback Engine V3/V4 Gated Clock VCK: 0x03
       0x0c PCI Master / DMA Gated Clock ECK/CPUCK: 0x0c
       0x30 Video Processor Gated Clock ECK: 0x30
       0xc0 Capturer Gated Clock ECK: 0xc0
    0x31 = 0x3d (IIC Serial Port Control 1)
    0x35 = 0x06 (Subsystem Vendor ID Low)
    0x36 = 0x11 (Subsystem Vendor ID High)
    0x37 = 0x22 (Subsystem ID Low)
    0x38 = 0x71 (Subsystem ID High)
    0x39 = 0x00 (BIOS Reserved Register 0)
    0x3a = 0x00 (BIOS Reserved Register 1)
    0x3b = 0x03 (PCI Revision ID Back Door)
    0x3c = 0x1d (Miscellaneous)
       0x01 AGP Bus Pack Door AGP3 Enable: 0x01
       0x02 Switch 3 PLLs to Prime Output: 0x00
       0x04 LCDCK PLL Locked Detect: 0x04
       0x08 VCK PLL Locked Detect: 0x08
       0x10 ECL PLL Locked Detect: 0x10
       0x60 PLL Frequency Division Select for Testing: 0x00
    0x3d = 0x3c (General Purpose I/O Port)
    0x3e = 0x00 (Miscellaneous Register for AGP Mux)
    0x3f = 0xff (Power Management Control 2)
       0x03 Video Clock Control (Gated ECK): 0x03
       0x0c 2D Clock Control (Gated ECK/CPUCK): 0x0c
       0x30 3D Clock Control (Gated ECK): 0x30
       0xc0 CR Clock Control (Gated ECK): 0xc0
    0x40 = 0x08 (PLL Control)
       0x01 Reset ECK PLL: 0x00
       0x02 Reset VCK PLL: 0x00
       0x04 Reset LCDCK PLL: 0x00
       0x08 LVDS Interrupt Method: 0x08
       0x30 Free Run ECK Frequency within Idle Mode: 0x00
       0x80 CRT Sense Enable: 0x00
    0x41 = 0x40 (Typical Arbiter Control 1)
    0x42 = 0x30 (Typical Arbiter Control 1)
    0x43 = 0x3d (Graphics Bonding Option)
       0x01 Notebook Used Flag: 0x01
       0x04 Typical Channel 1 Arbiter Read Back Data Overwrite Flag: 0x04
       0x08 Typical Channel 0 Arbiter Read Back Data Overwrite Flag: 0x08
       0x10 IGA1 Display FIFO Underflow Flag: 0x10
       0x20 IGA2 Dispaly FIFO Underflow Flag: 0x20
       0x40 Windows Media Video Enable Flag: 0x00
       0x80 Advance Video Enable Flag: 0x00
    0x44 = 0xba (VCK Clock Synthesizer Vallue 0)
    0x45 = 0x10 (VCK Clock Synthesizer Vallue 1)
    0x46 = 0x05 (VCK Clock Synthesizer Vallue 2)
    0x47 = 0x54 (ECK Clock Synthesizer Vallue 0)
    0x48 = 0x80 (ECK Clock Synthesizer Vallue 1)
    0x49 = 0x03 (ECK Clock Synthesizer Vallue 2)
    0x4a = 0x54 (LDCK Clock Synthesizer Value 0)
    0x4b = 0x90 (LDCK Clock Synthesizer Value 1)
    0x4c = 0x03 (LDCK Clock Synthesizer Value 2)
    0x4d = 0x30 (Preemptive Arbiter Control)
    0x4e = 0x00 (Software Reset Control)
    0x4f = 0x5f (CR Gating Clock Control)
    0x50 = 0x1f (AGP Control)
    0x51 = 0x00 (Display FIFO Control 1)
    0x52 = 0x00 (Integrated TV Shadow Register Control)
    0x53 = 0xff (DAC Sense Control 1)
    0x54 = 0x00 (DAC Sense Control 2)
    0x55 = 0x00 (DAC Sense Control 3)
    0x56 = 0xff (DAC Sense Control 4)
    0x57 = 0x00 (Display FIFO Control 2)
    0x58 = 0x08 (GFX Power Control 1)
    0x59 = 0xdf (GFX Power Control 2)
       0x01 GFX-NM AGP Dynamic Clock Enable: 0x01
       0x02 GFX-NM GMINT Channel 0 Dynamic Clock Enable: 0x02
       0x04 GFX-NM GMINT Channel 1 Dynamic Clock Enable: 0x04
       0x08 GFX-NM PCIC Dynamic Clock Enable: 0x08
       0x10 GFX-NM IGA Dynamic Clock Enable: 0x10
       0x20 IGA Low Thrshold Enable: 0x00
       0x80 IGA1 Enable: 0x80
    0x5a = 0x01 (PCI Bus Control 2)
    0x5b = 0x00 (Device Used Status 0)
       0x01 LVDS1 Used IGA2 Source: 0x00
       0x02 LBDS1 Used IGA1 Source: 0x00
       0x04 LVDS0 Used IGA2 Source: 0x00
       0x08 LVDS1 Used IGA1 Source: 0x00
       0x10 DAC0 Used IGA2 Source: 0x00
       0x20 DAC0 Used IGA1 Source: 0x00
       0x40 DAC0 User is TV: 0x00
       0x80 DCVI Source Selection is TV: 0x00
    0x5c = 0x22 (Device Used Status 1)
       0x01 DVP1 Used IGA2 Source: 0x00
       0x02 DVP1 Used IGA1 Source: 0x02
       0x10 DAC1 Used IGA2 Source: 0x00
       0x20 DAC1 Used IGA1 Source: 0x20
       0x40 DAC1 User is TV: 0x00
    0x5d = 0xf0 (Timer Control)
    0x5e = 0x00 (DAC Control 2)
    0x60 = 0x00 (I2C Mode Control)
    0x61 = 0x00 (I2C Host Address)
    0x62 = 0x00 (I2C Host Data)
    0x63 = 0x40 (I2C Host Control)
    0x64 = 0x20 (I2C Status)
    0x65 = 0x09 (Power Management Control 6)
    0x66 = 0x20 (GTI Control 0)
    0x67 = 0x20 (GTI Control 1)
    0x68 = 0x80 (GTI Control 1)
    0x69 = 0x20 (GTI Control 1)
    0x6a = 0x00 (GTI Control 1)
    0x6b = 0x00 (GTI Control 1)
    0x6c = 0x00 (GTI Control 1)
    0x6d = 0x80 (GTI Control 1)
    0x6e = 0x01 (GTI Control 1)
    0x6f = 0x00 (GTI Control 1)
    0x70 = 0x20 (GARB Control 0)
    0x71 = 0x00 (Typical Arbiter Control 2)
    0x72 = 0x0f (Typical Arbiter Control 3)
    0x73 = 0x00 (Typical Arbiter Control 4)
    0x74 = 0x1f (Typical Arbiter Control 5)
    0x75 = 0x1f (Typical Arbiter Control 6)
    0x76 = 0x01 (Backlight Control 1)
       0x01 Backlight Control Enable: 0x01
    0x77 = 0x7e (Backlight Control 2)
    0x78 = 0x83 (Backlight Control 3)

Graphic Controller register dump:
    0x00 = 0x00 (Set / Reset)
    0x01 = 0x00 (Enable Set / Reset)
    0x02 = 0x00 (Color Compare)
    0x03 = 0x00 (Data Rotate)
    0x04 = 0x00 (Read Map Select)
    0x05 = 0x00 (Mode)
    0x06 = 0x05 (Miscellaneous)
    0x07 = 0x0f (Color Don't Care)
    0x08 = 0xff (Bit Mask)
    0x20 = 0x00 (Offset Register Control)
    0x21 = 0x00 (Offset Register A)
    0x22 = 0x00 (Offset Register B)

CRT controller register dump:
    0x00 = 0x7f (Horizontal Total)
    0x01 = 0x63 (Horizontal Display End)
    0x02 = 0x63 (Start Horizontal Blank)
    0x03 = 0x83 (End Horizontal Blank)
    0x04 = 0x6a (Start Horizontal Retrace)
    0x05 = 0x1a (End Horizontal Retrace)
    0x06 = 0x0b (Vertical Total)
    0x07 = 0x3e (Overflow)
    0x08 = 0x00 (Preset Row Scan)
    0x09 = 0x40 (Max Scan Line)
    0x0a = 0x1e (Cursor Start)
    0x0b = 0x00 (Cursor End)
    0x0c = 0x00 (Start Address High)
    0x0d = 0x00 (Start Address Low)
    0x0e = 0x00 (Cursor Location High)
    0x0f = 0xa0 (Cursor Location Low)
    0x10 = 0xe9 (Vertical Retrace Start)
    0x11 = 0x1b (Vertical Retrace End)
    0x12 = 0xdf (Vertical Display End)
    0x13 = 0x40 (Offset)
    0x14 = 0x1f (Underline Location)
    0x15 = 0xdf (Start Vertical Blank)
    0x16 = 0x0c (End Vertical Blank)
    0x17 = 0xa3 (CRTC Mode Control)
    0x18 = 0xff (Line Compare)
    0x30 = 0x08 (Display Fetch Blocking Control)
    0x31 = 0x00 (Half Line Position)
    0x32 = 0x11 (Mode Control)
    0x33 = 0x05 (Hsync Adjuster)
    0x34 = 0x00 (Starting Address Overflow)
    0x35 = 0x30 (Extended Overflow)
    0x36 = 0x31 (Power Management Control 3)
    0x37 = 0x34 (DAC Control)
    0x38 = 0xf7 (Signature Data B0)
    0x39 = 0x67 (Signature Data B1)
    0x3a = 0xfa (Signature Data B2)
    0x3b = 0x0a (Scratch Pad 2)
    0x3c = 0x00 (Scratch Pad 3)
    0x3d = 0x00 (Scratch Pad 4)
    0x3e = 0x00 (Scratch Pad 5)
    0x3f = 0x00 (Scratch Pad 6)
    0x40 = 0x00 (Test Mode Control 0)
    0x43 = 0x90 (IGA1 Display Control)
    0x45 = 0x00 (Power Now Indicator Control 3)
    0x46 = 0x00 (Test Mode Control 1)
    0x47 = 0x02 (Test Mode Control 2)
    0x48 = 0x00 (Starting Address Overflow)
    0x50 = 0xf9 (Second CRTC Horizontal Total Period)
    0x51 = 0x79 (Second CRTC Horizontal Active Data Period)
    0x52 = 0xfd (Second CRTC Horizontal Blanking Start)
    0x53 = 0xf5 (Second CRTC Horizontal Blanking End)
    0x54 = 0xf1 (Second CRTC Horizontal Blanking Overflow)
    0x55 = 0x00 (Second CRTC Horizontal Period Overflow)
    0x56 = 0xf3 (Second CRTC Horizontal Retrace Start)
    0x57 = 0xf1 (Second CRTC Horizontal Retrace End)
    0x58 = 0xf1 (Second CRTC Vertical Total Period)
    0x59 = 0xf1 (Second CRTC Vertical Active Data Period)
    0x5a = 0xf1 (Second CRTC Vertical Blanking Start)
    0x5b = 0xf1 (Second CRTC Vertical Blanking End)
    0x5c = 0xf1 (Second CRTC Vertical Blanking Overflow)
    0x5d = 0xf5 (Second CRTC Vertical Period Overflow)
    0x5e = 0xf1 (Second CRTC Vertical Retrace Start)
    0x5f = 0xf1 (Second CRTC Vertical Retrace End)
    0x60 = 0x00 (Second CRTC Vertical Status 1)
    0x61 = 0x20 (Second CRTC Vertical Status 2)
    0x62 = 0x00 (Second Display Starting Address Low)
    0x63 = 0x00 (Second Display Starting Address Middle)
    0x64 = 0x00 (Second Display Starting Address High)
    0x65 = 0xf1 (Second Display Horizontal Quadword Count)
    0x66 = 0xf1 (Second Display Horizontal Offset)
    0x67 = 0x00 (Second Display Col Depth and Horiz Overfl)
    0x68 = 0x67 (Second Display Queue Depth and Read Thresh)
    0x69 = 0x00 (Second Display Interrupt Enable and Status)
    0x6a = 0x40 (Second Display Channel and LCD Enable)
    0x6b = 0x04 (Channel 1 and 2 Clock Mode Selection)
    0x6c = 0x00 (TV Clock Control)
    0x6d = 0x7f (Horizontal Total Shadow)
    0x6e = 0x83 (End Horizontal Blanking Shadow)
    0x6f = 0x0b (Vertical Total Shadow)
    0x70 = 0xdf (Vertical Display Enable End Shadow)
    0x71 = 0x92 (Vertical Display Overflow Shadow)
    0x72 = 0xdf (Start Vertical Blank Shadow)
    0x73 = 0x0c (End Vertical Blank Shadow)
    0x74 = 0x12 (Vertical Blank Overflow Shadow)
    0x75 = 0xea (Vertical Retrace Start Shadow)
    0x76 = 0x1c (Vertical Retrace End Shadow)
    0x77 = 0x32 (LCD Horizontal Scaling Factor)
    0x78 = 0x55 (LCD Vertical Scaling Facor)
    0x79 = 0xff (LCD Scaling Control)
    0x7a = 0x13 (LCD Scaling Parameter 1)
    0x7b = 0x15 (LCD Scaling Parameter 2)
    0x7c = 0x11 (LCD Scaling Parameter 3)
    0x7d = 0x11 (LCD Scaling Parameter 4)
    0x7e = 0x11 (LCD Scaling Parameter 5)
    0x7f = 0x11 (LCD Scaling Parameter 6)
    0x80 = 0x11 (LCD Scaling Parameter 7)
    0x81 = 0x11 (LCD Scaling Parameter 8)
    0x82 = 0x11 (LCD Scaling Parameter 9)
    0x83 = 0x11 (LCD Scaling Parameter 10)
    0x84 = 0x19 (LCD Scaling Parameter 11)
    0x85 = 0x11 (LCD Scaling Parameter 12)
    0x86 = 0x11 (LCD Scaling Parameter 13)
    0x87 = 0x15 (LCD Scaling Parameter 14)
    0x88 = 0xa1 (LCD Panel Type)
    0x8a = 0x01 (LCD Timing Control 1)
    0x8b = 0xca (LCD Power Sequence Control 0)
    0x8c = 0xca (LCD Power Sequence Control 1)
    0x8d = 0xca (LCD Power Sequence Control 2)
    0x8e = 0xca (LCD Power Sequence Control 3)
    0x8f = 0x11 (LCD Power Sequence Control 4)
    0x90 = 0x11 (LCD Power Sequence Control 5)
    0x91 = 0x00 (Software Cotnrol Power Sequence)
    0x92 = 0x07 (Read Threshold 2)
    0x94 = 0x00 (Expire Number and Display Queue Extend)
    0x95 = 0x00 (Extend Threshold Bit)
    0x97 = 0x00 (LVDS Channel 2 Function Select 0)
    0x98 = 0x00 (LVDS Channel 2 Function Select 1)
    0x99 = 0x00 (LVDS Channel 1 Function Select 0)
    0x9a = 0x00 (LVDS Channel 1 Function Select 1)
    0x9b = 0x09 (Digital Video Port 1 Function Select 0)
    0x9c = 0x00 (Digital Video Port 1 Function Select 1)
    0x9d = 0x00 (Power Now Control 2)
    0x9e = 0x00 (Power Now Control 3)
    0x9f = 0x03 (Power Now Control 4)
    0xa0 = 0x00 (Horizontal Scaling Initial Value)
    0xa1 = 0x00 (Vertical Scaling Initial Value)
    0xa2 = 0xc0 (Horizontal and Vertical Scaling Enable)
    0xa3 = 0x00 (Second Display Starting Address Extended)
    0xa5 = 0x50 (Second LCD Vertical Scaling Factor)
    0xa6 = 0xfb (Second LCD Vertical Scaling Factor)
    0xa7 = 0x8b (Expected IGA1 Vertical Display End)
    0xa8 = 0x01 (Expected IGA1 Vertical Display End)
    0xa9 = 0x00 (Hardware Gamma Control)
    0xaa = 0x00 (FIFO Depth + Threshold Overflow)
    0xab = 0x00 (IGA2 Inetrlace Half Line)
    0xac = 0x00 (IGA2 Inetrlace Half Line)
    0xaf = 0x00 (P-Arbiter Write Expired Number)
    0xb0 = 0x00 (IGA2 Pack Circuit Request Threshold)
    0xb1 = 0x00 (IGA2 Pack Circuit Request High Threshold)
    0xb2 = 0x00 (IGA2 Pack Circuit Request Expire Threshold)
    0xb3 = 0x00 (IGA2 Pack Circuit Control)
    0xb4 = 0x00 (IGA2 Pack Circuit Target Base Address 0)
    0xb5 = 0x00 (IGA2 Pack Circuit Target Base Address 0)
    0xb6 = 0x00 (IGA2 Pack Circuit Target Base Address 0)
    0xb7 = 0x00 (IGA2 Pack Circuit Target Base Address 0)
    0xb8 = 0x00 (IGA2 Pack Circuit Target Line Pitch)
    0xb9 = 0x00 (IGA2 Pack Circuit Target Line Pitch)
    0xba = 0x00 (V Counter Set Pointer)
    0xbb = 0x00 (V Counter Set Pointer)
    0xbc = 0x00 (V Counter Reset Value)
    0xbd = 0x00 (V Counter Reset Value)
    0xbe = 0x00 (Frame Buffer Limit Value)
    0xbf = 0x00 (Frame Buffer Limit Value)
    0xc0 = 0x00 (Expected IGA1 Vertical Display End 1)
    0xc1 = 0x00 (Expected IGA1 Vertical Display End 1)
    0xc2 = 0x00 (Third LCD Vertical Scaling Factor)
    0xc3 = 0x00 (Third LCD Vertical Scaling Factor)
    0xc4 = 0x00 (Expected IGA1 Vertical Display End 2)
    0xc5 = 0x00 (Expected IGA1 Vertical Display End 2)
    0xc7 = 0x00 (Fourth LCD Vertical Scaling Factor)
    0xc8 = 0x00 (IGA2 Pack Circuit Target Base Address 1)
    0xc9 = 0x00 (IGA2 Pack Circuit Target Base Address 1)
    0xca = 0x00 (IGA2 Pack Circuit Target Base Address 1)
    0xcb = 0x00 (IGA2 Pack Circuit Target Base Address 1)
    0xd0 = 0x10 (LVDS PLL1 Control)
    0xd1 = 0x00 (LVDS PLL2 Control)
    0xd2 = 0xc8 (LVDS Control)
    0xd3 = 0x00 (LVDS Second Power Sequence Control 0)
    0xd4 = 0x02 (LVDS Second Power Sequence Control 1)
    0xd5 = 0x88 (LVDS Texting Mode Control)
    0xd6 = 0x00 (DCVI Control Register 0)
    0xd7 = 0x00 (DCVI Control Register 1)
    0xd9 = 0x00 (Scaling Down Source Data Offset Control)
    0xda = 0x00 (Scaling Down Source Data Offset Control)
    0xdb = 0x00 (Scaling Down Source Data Offset Control)
    0xdc = 0x00 (Scaling Down Vertical Scale Control)
    0xdd = 0x00 (Scaling Down Vertical Scale Control)
    0xde = 0x00 (Scaling Down Vertical Scale Control)
    0xdf = 0x00 (Scaling Down Vertical Scale Control)
    0xe0 = 0x00 (Scaling Down Destination FB Starting Addr 0)
    0xe1 = 0x00 (Scaling Down Destination FB Starting Addr 0)
    0xe2 = 0x00 (Scaling Down Destination FB Starting Addr 0)
    0xe3 = 0x00 (Scaling Down Destination FB Starting Addr 0)
    0xe4 = 0x00 (Scaling Down SW Source FB Stride)
    0xe5 = 0x00 (Scaling Down Destination FB Starting Addr 1)
    0xe6 = 0x00 (Scaling Down Destination FB Starting Addr 1)
    0xe7 = 0x00 (Scaling Down Destination FB Starting Addr 1)
    0xe8 = 0x40 (Scaling Down Destination FB Starting Addr 1)
    0xe9 = 0x00 (Scaling Down Destination FB Starting Addr 2)
    0xea = 0x00 (Scaling Down Destination FB Starting Addr 2)
    0xeb = 0x00 (Scaling Down Destination FB Starting Addr 2)
    0xec = 0x00 (IGA1 Down Scaling Destination Control)
    0xf0 = 0x00 (Snapshot Mode - Starting Address of Disp Data)
    0xf1 = 0x00 (Snapshot Mode - Starting Address of Disp Data)
    0xf2 = 0x00 (Snapshot Mode - Starting Address of Disp Data)
    0xf3 = 0x12 (Snapshot Mode Control)
    0xf4 = 0x00 (Snapshot Mode Control)
    0xf5 = 0x00 (Snapshot Mode Control)
    0xf6 = 0x00 (Snapshot Mode Control)

VCK PLL: dm=186, dtx=2, dr=2, dn=2 VCK Fvco=672946 kHz, Fout=168236 kHz
ECK PLL: dm=596, dtx=2, dr=0, dn=1 ECK Fvco=2854054 kHz, Fout=0 kHz
LDCK PLL: dm=596, dtx=2, dr=2, dn=1 LDCK Fvco=2854054 kHz, Fout=713513 kHz
SL in System memory: 0x10000000, RTSF in SL: 0x0
Primary Display:
    H total=1056, active=800, blank (800-32), sync(848-208)
    V total=525, active=480, blank (480-13), sync(489-11)
base_addr=0x00000000, bpp=32

Secondary Display:
    H total=250, active=122, blank (510-7926), sync(4083-497)
    V total=1522, active=1778, blank (498-1778), sync(2033-17)
base_addr=0x00000000, bpp=8

Panel Scaling enabled, mode Interpolation
Scaling Factors: horizontal=3275, vertical=1707

LVDS Seq Mode: LVDS1 + LVDS2
LVDS CRT Mode: LVDS1 + LVDS2
LVDS Channel 1 Format SPWG, Power Down
LVDS Channel 2 Format SPWG, Power Down

