This is an automated email from Gerrit. Uwe Hermann ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/548
-- gerrit commit 7ddef8d86c3af9f53e8969b5a8e20bd8660ebc41 Author: Uwe Hermann <[email protected]> Date: Mon Apr 2 00:25:37 2012 +0200 Initial config for the Voltcraft DSO-3062C. This is a digital oscilloscope which uses a Samsung S3C2440 internally. http://randomprojects.org/wiki/Voltcraft_DSO-3062C Signed-off-by: Uwe Hermann <[email protected]> Change-Id: I5e28c3a8f30665a162e34c831294e4e658a16ebb diff --git a/tcl/board/voltcraft_dso-3062c.cfg b/tcl/board/voltcraft_dso-3062c.cfg new file mode 100644 index 0000000..01e37e9 --- /dev/null +++ b/tcl/board/voltcraft_dso-3062c.cfg @@ -0,0 +1,31 @@ +# +# Voltcraft DSO-3062C digital oscilloscope (uses a Samsung S3C2440) +# +# http://www.eevblog.com/forum/general-chat/hantek-tekway-dso-hack-get-200mhz-bw-for-free/ +# http://www.mikrocontroller.net/topic/249628 +# http://elinux.org/Das_Oszi +# http://randomprojects.org/wiki/Voltcraft_DSO-3062C +# + +# Enable this if your JTAG adapter supports multiple transports (JTAG or SWD). +# Otherwise comment it out, as it will cause an OpenOCD error. +### transport select jtag + +source [find target/samsung_s3c2440.cfg] + +adapter_khz 16000 + +# Samsung K9F1208U0C NAND flash chip (64MiB, 3.3V, 8-bit) +nand device $_CHIPNAME.nand s3c2440 $_TARGETNAME + +# arm7_9 fast_memory_access enable +# arm7_9 dcc_downloads enable + +init +reset +halt +scan_chain +targets +nand probe 0 +nand list + -- ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
