could be a good starting point for itm. some comments .
- stlink-trace name is not so good since your did not do trace but itm trace. - to integrate this in openocd you need to think about target / interface layer / ... you have done the job for a specific target, for a specific interface , you need to think generic for openocd integration. So integrating this in stlink-v2 is not GOOD, since ITM is not specific to the interface but to the target ... Regards, Laurent http://www.amontec.com Amotnec JTAGkey-2 USB JTAG cable high-speed Le 21.03.2013 11:20, [email protected] a écrit : > I have been working on a stand-alone ITM trace utility for > the ST-Link V2 connected to the STM32F10x/20x series > micro-controllers. Everything is available at > http://obe1line.github.com/stlink-trace/. > > Is this functionality useful for integrating within the OpenOCD > stlink-v2 driver? Currently, the utility is useable but it would be > good if it can be used within an OpenOCD debugging session. > > Any comments/assistance is most welcome. > > Regards, > Chris > > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_mar > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
