This is an automated email from Gerrit. Tomas Vanek ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/4762
-- gerrit commit 97046d6995e0075710bea64b49b900e1b121bfff Author: Tomas Vanek <[email protected]> Date: Mon Nov 12 12:13:34 2018 +0100 tcl/target: ti_tms570.cfg restructure dap support ti_tms570 was probably omitted in commit 2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f Change-Id: Idd4828fd5ea3641bda6c73c7f07a598c1e512ef6 Signed-off-by: Tomas Vanek <[email protected]> diff --git a/tcl/target/ti_tms570.cfg b/tcl/target/ti_tms570.cfg index 21da6c0..1c89b8c 100644 --- a/tcl/target/ti_tms570.cfg +++ b/tcl/target/ti_tms570.cfg @@ -20,8 +20,8 @@ source [find target/icepick.cfg] if { [info exists DAP_TAPID] } { set _DAP_TAPID $DAP_TAPID } -jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable -jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable +jtag configure $_CHIPNAME.cpu -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" # ICEpick-C (JTAG route controller) # JRC_TAPID should be set before source-ing this file @@ -50,16 +50,18 @@ jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ -expected-id $_JRC_TAPID8 \ -expected-id $_JRC_TAPID9 \ -ignore-version -jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" +jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.cpu" jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100" +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu + # Cortex-R4 target set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \ - -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003 + -dap $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003 # TMS570 uses quirky BE-32 mode -$_TARGETNAME dap ti_be_32_quirks 1 +$_CHIPNAME.dap ti_be_32_quirks 1 $_TARGETNAME configure -event gdb-attach { cortex_r4 dbginit -- _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
