Dear Jonathan,
I added ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2141", MODE="664",
GROUP="plugdev", TAG+="uaccess" to 60-openocd.rules
rebooted and no succes
I also tried ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2141", MODE="660",
GROUP="plugdev", TAG+="uaccess"
reboot and no succes
how can I check if Arduino has permission to find the usb Atmel Ice?
kind regards, Andries
[1467287908084_PastedImage]
Yens & Yens
Joris van den Berghweg 111 hal G
1067HP Amsterdam
www.yens-yens.nl<http://www.yens-yens.nl>
KVK: 33.207.096
BTW: 00 86 50 068 B01
Bank: NL68INGB0003487789
Chris Heijens 06 55753191
Andries Oyens 06 24697446
Floris Leenders 06 12630811
________________________________
From: Jonathan McDowell <[email protected]>
Sent: Wednesday, November 20, 2019 17:25
To: [openocd:tickets] <[email protected]>
Subject: [openocd:tickets] Re: #258 sudo apt install openocd
FWIW the Debian package installs the udev rules to
lib/udev/rules.d/60-openocd.rules, as they are part of the package. However
they do not have the 2141 PID in them, just 03eb/204f, so if it was working
before there must have been something extra installed/configured.
________________________________
[tickets:#258]<https://sourceforge.net/p/openocd/tickets/258/> sudo apt install
openocd
Status: new
Milestone: 0.9.0
Labels: openOCD arduino no port
Created: Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
Last Updated: Wed Nov 20, 2019 03:30 PM UTC
Owner: Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
________________________________
Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/openocd/tickets/258/
To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
---
** [tickets:#258] sudo apt install openocd**
**Status:** new
**Milestone:** 0.9.0
**Labels:** openOCD arduino no port
**Created:** Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
**Last Updated:** Wed Nov 20, 2019 04:30 PM UTC
**Owner:** Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
---
Sent from sourceforge.net because [email protected] is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list._______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
