Index: src/target/target/pxa270.cfg =================================================================== --- src/target/target/pxa270.cfg (revision 1112) +++ src/target/target/pxa270.cfg (working copy) @@ -10,10 +10,10 @@ #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 7 0x1 0x7f 0x7e -target xscale little 0 pxa27x +target create target0 xscale -endian little -chain-position 0 -variant pxa27x # maps to PXA internal RAM. If you are using a PXA255 # you must initialize SDRAM or leave this option off -working_area 0 0x5c000000 0x10000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0 #flash bank # works for P30 flash Index: src/target/target/pxa255.cfg =================================================================== --- src/target/target/pxa255.cfg (revision 1112) +++ src/target/target/pxa255.cfg (working copy) @@ -2,7 +2,7 @@ jtag_nsrst_delay 200 jtag_ntrst_delay 200 -target xscale little 0 pxa255 +target create target0 xscale -endian little -chain-position 0 -variant pxa255 [new_target_name] configure -event reset-init { script event/pxa255_reset.script } reset_config trst_and_srst Index: src/target/target/epc9301.cfg =================================================================== --- src/target/target/epc9301.cfg (revision 1112) +++ src/target/target/epc9301.cfg (working copy) @@ -3,8 +3,8 @@ jtag_nsrst_delay 100 jtag_ntrst_delay 100 -target arm920t little 0 -working_area 0 0x80014000 0x1000 backup +target create target0 arm920t -endian little -chain-position 0 -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1 + #flash configuration #flash bank [driver_options ...] flash bank cfi 0x60000000 0x1000000 2 2 0 Index: src/target/target/pic32mx.cfg =================================================================== --- src/target/target/pic32mx.cfg (revision 1112) +++ src/target/target/pic32mx.cfg (working copy) @@ -8,13 +8,9 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 5 0x1 0x1 0x1e -#target -#target arm7tdmi -target mips_m4k little 0 +target create target0 mips_m4k -endian little -chain-position 0 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 - -working_area 0 0xa0000000 16384 nobackup - #flash bank str7x 0 0 #flash bank stm32x 0 0 0 0 0 Index: src/target/target/wi-9c.cfg =================================================================== --- src/target/target/wi-9c.cfg (revision 1112) +++ src/target/target/wi-9c.cfg (working copy) @@ -14,16 +14,10 @@ # Target configuration ###################### -#target -target arm926ejs big 0 arm926ejs - +target create target0 arm926ejs -endian big -chain-position 0 -variant arm926ejs [new_target_name] configure -event reset-init { script event/wi-9c_reset.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00000000 -work-area-size 0x1000 -work-area-backup 1 - -#working area
-working_area 0 0x00000000 0x1000 backup - - ##################### # Flash configuration ##################### Index: src/target/target/at91eb40a.cfg =================================================================== --- src/target/target/at91eb40a.cfg (revision 1112) +++ src/target/target/at91eb40a.cfg (working copy) @@ -14,7 +14,7 @@ jtag_device 4 0x1 0xf 0xe #target configuration -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 # speed up memory downloads arm7_9 fast_memory_access enable @@ -25,9 +25,8 @@ # required for usable performance. Used for lots of # other things than flash programming. -working_area 0 0x00030000 0x10000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0 - [new_target_name] configure -event reset-init { puts "Running reset init script for AT91EB40A" # Reset script for AT91EB40a Index: src/target/target/sam7x256.cfg =================================================================== --- src/target/target/sam7x256.cfg (revision 1112) +++ src/target/target/sam7x256.cfg (working copy) @@ -5,12 +5,10 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-init { script event/sam7x256_reset.script } -working_area 0 0x00200000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank flash bank at91sam7 0 0 0 0 0 Index: src/target/target/at91r40008.cfg =================================================================== --- src/target/target/at91r40008.cfg (revision 1112) +++ src/target/target/at91r40008.cfg (working copy) @@ -8,14 +8,13 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event old-gdb_program_config { script event/at91r40008_reset.script } -working_area 0 0x3C000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 + flash bank cfi 0x10000000 0x400000 2 2 0 # For more information about the configuration files, take a look at: Index: src/target/target/str9comstick.cfg =================================================================== --- src/target/target/str9comstick.cfg (revision 1112) +++ src/target/target/str9comstick.cfg (working copy) @@ -12,8 +12,8 @@ jtag_device 8 0x1 0x1 0xfe jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e -target arm966e little 1 arm966e +target create target0 arm966e -endian little -chain-position 1 -variant arm966e +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 -working_area 0 0x50000000 16384 nobackup #flash bank flash bank str9x 0x00000000 0x00080000 0 0 0 Index: src/target/target/test_syntax_error.cfg =================================================================== --- src/target/target/test_syntax_error.cfg (revision 1112) +++ src/target/target/test_syntax_error.cfg (working copy) @@ -1,4 +1,4 @@ # This script tests a syntax error in the startup # config script -syntax error here \ No newline at end of file +syntax error here Index: src/target/target/lpc2294.cfg =================================================================== --- src/target/target/lpc2294.cfg (revision 1112) +++ src/target/target/lpc2294.cfg (working copy) @@ -5,13 +5,9 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 - -working_area 0 0x40000000 0x4000 nobackup - #flash configuration #flash bank lpc2000 0 0 flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum Index: src/target/target/str710.cfg =================================================================== --- src/target/target/str710.cfg (revision 1112) +++ src/target/target/str710.cfg (working copy) @@ -9,16 +9,12 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 6000 } [new_target_name] configure -event old-gdb_program_config { script event/str710_program.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 - -working_area 0 0x2000C000 0x4000 nobackup - #flash bank str7x 0 0 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x Index: src/target/target/at91sam9260.cfg =================================================================== --- src/target/target/at91sam9260.cfg (revision 1112) +++ src/target/target/at91sam9260.cfg (working copy) @@ -14,16 +14,12 @@ # Target configuration ###################### -#target -target arm926ejs little 0 arm926ejs +target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs [new_target_name] configure -event reset-init { script event/at91sam9260_reset.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 -#working area
-working_area 0 0x00300000 0x1000 backup - - ##################### # Flash configuration ##################### Index: src/target/target/imx31.cfg =================================================================== --- src/target/target/imx31.cfg (revision 1112) +++ src/target/target/imx31.cfg (working copy) @@ -15,5 +15,5 @@ jtag_nsrst_delay 500 jtag_ntrst_delay 500 -target arm11 little 1 +target create target0 arm11 -endian little -chain-position 1 Index: src/target/target/s3c2440.cfg =================================================================== --- src/target/target/s3c2440.cfg (revision 1112) +++ src/target/target/s3c2440.cfg (working copy) @@ -7,10 +7,9 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target -target arm920t little 0 arm920t +target create target0 arm920t -endian little -chain-position 0 -variant arm920t #reset configuration reset_config trst_and_srst -working_area 0 0x200000 0x4000 backup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 Index: src/target/target/str730.cfg =================================================================== --- src/target/target/str730.cfg (revision 1112) +++ src/target/target/str730.cfg (working copy) @@ -16,13 +16,12 @@ jtag_nsrst_delay 500 jtag_ntrst_delay 500 -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 3000 } [new_target_name] configure -event old-gdb_program_config { script event/str730_program.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 -working_area 0 0x40000000 0x4000 nobackup - #flash bank flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x Index: src/target/target/netx500.cfg =================================================================== --- src/target/target/netx500.cfg (revision 1112) +++ src/target/target/netx500.cfg (working copy) @@ -6,5 +6,5 @@ jtag_device 4 0x1 0xf 0xe jtag_nsrst_delay 100 jtag_ntrst_delay 100 -target arm926ejs little 0 arm926ejs +target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs Index: src/target/target/nslu2.cfg =================================================================== --- src/target/target/nslu2.cfg (revision 1112) +++ src/target/target/nslu2.cfg (working copy) @@ -6,12 +6,12 @@ jtag_device 7 0x1 0x7f 0x7e # target configuration -target xscale big 0 ixp42x +target create target0 xscale -endian big -chain-position 0 -variant ixp42x # maps to PXA internal RAM. If you are using a PXA255 # you must initialize SDRAM or leave this option off -working_area 0 0x00020000 0x10000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0 # flash bank #flash bank cfi 0x50000000 0x1000000 2 4 0 Index: src/target/target/str912.cfg =================================================================== --- src/target/target/str912.cfg (revision 1112) +++ src/target/target/str912.cfg (working copy) @@ -17,9 +17,7 @@ jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e -#target -#target arm7tdmi -target arm966e little 1 arm966e +target create target0 arm966e -endian little -chain-position 1 -variant arm966e [new_target_name] configure -event reset-start { jtag_rclk 16 } @@ -35,10 +33,8 @@ flash protect 0 0 7 off } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 - -working_area 0 0x50000000 16384 nobackup - #flash bank str9x 0 0 flash bank str9x 0x00000000 0x00080000 0 0 0 flash bank str9x 0x00080000 0x00008000 0 0 0 Index: src/target/target/str750.cfg =================================================================== --- src/target/target/str750.cfg (revision 1112) +++ src/target/target/str750.cfg (working copy) @@ -16,16 +16,13 @@ jtag_nsrst_delay 500 jtag_ntrst_delay 500 -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-start { jtag_khz 10 } [new_target_name] configure -event reset-init { jtag_khz 3000 } [new_target_name] configure -event old-gdb_program_config { script event/str750_program.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 -working_area 0 0x40000000 0x4000 nobackup - #flash bank flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x flash bank str7x 0x200C0000 0x00004000 0 0 0 STR75x Index: src/target/target/stm32stick.cfg =================================================================== --- src/target/target/stm32stick.cfg (revision 1112) +++ src/target/target/stm32stick.cfg (working copy) @@ -15,13 +15,10 @@ jtag_device 5 0x1 0x1 0x1e jtag_device 4 0x1 0xf 0xe -#target -#target arm7tdmi -target cortex_m3 little 0 +target create target0 cortex_m3 -endian little -chain-position 0 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 -working_area 0 0x20000000 16384 nobackup - #flash bank str7x 0 0 flash bank stm32x 0 0 0 0 0 Index: src/target/target/lm3s811.cfg =================================================================== --- src/target/target/lm3s811.cfg (revision 1112) +++ src/target/target/lm3s811.cfg (working copy) @@ -16,10 +16,10 @@ # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon -target cortex_m3 little 0 lm3s +target create target0 cortex_m3 -endian little -chain-position 0 -variant lm3s # 8k working area at base of ram -working_area 0 0x20000000 0x2000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 #flash configuration flash bank stellaris 0 0 0 0 0 Index: src/target/target/lm3s6965.cfg =================================================================== --- src/target/target/lm3s6965.cfg (revision 1112) +++ src/target/target/lm3s6965.cfg (working copy) @@ -16,10 +16,10 @@ # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon -target cortex_m3 little 0 lm3s +target create target0 cortex_m3 -endian little -chain-position 0 -variant lm3s # 4k working area at base of ram -working_area 0 0x20000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x4000 -work-area-backup 0 #flash configuration flash bank stellaris 0 0 0 0 0 Index: src/target/target/hammer.cfg =================================================================== --- src/target/target/hammer.cfg (revision 1112) +++ src/target/target/hammer.cfg (working copy) @@ -9,17 +9,14 @@ jtag_device 4 0x1 0xf 0xe -target arm920t little 0 arm920t +target create target0 arm920t -endian little -chain-position 0 -variant arm920t +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40800000 -work-area-size 0x20000 -work-area-backup 0 [new_target_name] configure -event reset-init { script event/hammer_reset.script } # speed up memory downloads arm7 fast_memory_access enable arm7_9 dcc_downloads enable - -working_area 0 0x30800000 0x20000 nobackup - - #flash configuration #flash bank [driver_options ...] flash bank cfi 0x00000000 0x1000000 2 2 0 Index: src/target/target/xba_revA3.cfg =================================================================== --- src/target/target/xba_revA3.cfg (revision 1112) +++ src/target/target/xba_revA3.cfg (working copy) @@ -9,12 +9,12 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR capture Mask, IDCODE) jtag_device 7 0x1 0x7f 0x7e -target xscale big 0 ixp42x +target create target0 xscale -endian big -chain-position 0 -variant ixp42x [new_target_name] configure -event reset-init { script event/xba_revA3.script } +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 flash bank cfi 0x50000000 0x400000 2 2 0 -working_area 0 0x20010000 0x8060 nobackup init reset init Index: src/target/target/omap5912.cfg =================================================================== --- src/target/target/omap5912.cfg (revision 1112) +++ src/target/target/omap5912.cfg (working copy) @@ -10,11 +10,11 @@ jtag_device 4 0x1 0x0 0xe jtag_device 8 0x0 0x0 0x0 -target arm926ejs little 1 arm926ejs +target create target0 arm926ejs -endian little -chain-position 1 -variant arm926ejs [new_target_name] configure -event reset-init { script event/omap5912_reset.script } # omap5912 lcd frame buffer as working area -working_area 0 0x20000000 0x3e800 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0 #flash bank flash bank cfi 0x00000000 0x1000000 2 2 0 Index: src/target/target/lpc2129.cfg =================================================================== --- src/target/target/lpc2129.cfg (revision 1112) +++ src/target/target/lpc2129.cfg (working copy) @@ -4,8 +4,9 @@ #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 -working_area 0 0x40000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + #flash bank flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum Index: src/target/target/lpc2148.cfg =================================================================== --- src/target/target/lpc2148.cfg (revision 1112) +++ src/target/target/lpc2148.cfg (working copy) @@ -13,7 +13,7 @@ #jtag scan chain jtag_device 4 0x1 0xf 0xe -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 [new_target_name] configure -event reset-init { # Force target into ARM state soft_reset_halt @@ -22,7 +22,7 @@ } -working_area 0 0x40000000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank lpc2000 0 0 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 Index: src/target/target/aduc702x.cfg =================================================================== --- src/target/target/aduc702x.cfg (revision 1112) +++ src/target/target/aduc702x.cfg (working copy) @@ -15,13 +15,13 @@ ## ## Target configuration ## -target arm7tdmi little 0 +target create target0 arm7tdmi -endian little -chain-position 0 ## software initiated reset (if your SRST isn't wired) #proc target_0_reset {} { mwb 0x0ffff0230 04 } # use top 1k of SRAM for as temporary JTAG memory -#working_area 0 0x11C00 0x400 backup +#[new_target_name] configure -work-area-virt 0 -work-area-phys 0x11C00 -work-area-size 0x400 -work-area-backup 1 ## flash configuration flash bank aduc702x 0x80000 0x10000 2 2 0 Index: src/target/target/ipx42x.cfg =================================================================== --- src/target/target/ipx42x.cfg (revision 1112) +++ src/target/target/ipx42x.cfg (working copy) @@ -5,5 +5,5 @@ #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 7 0x1 0x7f 0x7e -target xscale big 0 IXP42x +target create target0 xscale -endian big -chain-position 0 -variant IXP42x Index: src/target/target/test_reset_syntax_error.cfg =================================================================== --- src/target/target/test_reset_syntax_error.cfg (revision 1112) +++ src/target/target/test_reset_syntax_error.cfg (working copy) @@ -7,7 +7,7 @@ jtag_device 4 0x1 0xf 0xe #target configuration -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 [new_target_name] configure -event reset-init { Index: src/target/target/zy1000.cfg =================================================================== --- src/target/target/zy1000.cfg (revision 1112) +++ src/target/target/zy1000.cfg (working copy) @@ -13,8 +13,7 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -#target configuration -target arm7tdmi little 0 arm7tdmi-s_r4 +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 # at CPU CLK <32kHz this must be disabled arm7_9 fast_memory_access enable @@ -45,7 +44,7 @@ # required for usable performance. Used for lots of # other things than flash programming. -working_area 0 0x00020000 0x20000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0 jtag_khz 16000 @@ -89,4 +88,4 @@ sleep 25000 target_request debugmsgs disable return "See IP address above..." -} \ No newline at end of file +} Index: src/target/target/eir-sam7se512.cfg =================================================================== --- src/target/target/eir-sam7se512.cfg (revision 1112) +++ src/target/target/eir-sam7se512.cfg (working copy) @@ -5,12 +5,12 @@ #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe -target arm7tdmi little 0 arm7tdmi +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi [new_target_name] configure -event reset-init { script event/eir-sam7se512_reset.script } -working_area 0 0x00200000 0x4000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank flash bank at91sam7 0 0 0 0 0 Index: src/target/target/lm3s3748.cfg =================================================================== --- src/target/target/lm3s3748.cfg (revision 1112) +++ src/target/target/lm3s3748.cfg (working copy) @@ -19,10 +19,10 @@ # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon -target cortex_m3 little 0 lm3s +target create target0 cortex_m3 -endian little -chain-position 0 -variant lm3s # 8k working area at base of ram -working_area 0 0x20000000 0x2000 nobackup +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 #flash configuration flash bank stellaris 0 0 0 0 0 Index: src/target/target/at91sam9260minimal.cfg =================================================================== --- src/target/target/at91sam9260minimal.cfg (revision 1112) +++ src/target/target/at91sam9260minimal.cfg (working copy) @@ -14,7 +14,6 @@ # Target configuration ###################### -#target -target arm926ejs little 0 arm926ejs +target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs Index: src/target/target/stm32.cfg =================================================================== --- src/target/target/stm32.cfg (revision 1112) +++ src/target/target/stm32.cfg (working copy) @@ -14,13 +14,10 @@ jtag_device 4 0x1 0xf 0xe jtag_device 5 0x1 0x1 0x1e -#target -#target arm7tdmi -target cortex_m3 little 0 +target create target0 cortex_m3 -endian little -chain-position 0 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 -working_area 0 0x20000000 16384 nobackup - #flash bank str7x 0 0 flash bank stm32x 0 0 0 0 0 Index: src/target/target/pxa255_sst.cfg =================================================================== --- src/target/target/pxa255_sst.cfg (revision 1112) +++ src/target/target/pxa255_sst.cfg (working copy) @@ -10,4 +10,5 @@ script target/pxa255.cfg # flash bank [options] flash bank cfi 0x00000000 0x80000 2 2 0 jedec_probe -working_area 0 0x4000000 0x4000 nobackup 0 + +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0 Index: testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg =================================================================== --- testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg (revision 1112) +++ testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg (working copy) @@ -22,17 +22,15 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi-s_r4 - -working_area 0 0x40000000 0x4000 nobackup - #flash configuration #flash bank lpc2000 0 0 flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/STR710Test/prj/str710_jtagkey.cfg =================================================================== --- testing/examples/STR710Test/prj/str710_jtagkey.cfg (revision 1112) +++ testing/examples/STR710Test/prj/str710_jtagkey.cfg (working copy) @@ -22,18 +22,16 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi - target_script 0 gdb_program_config .\prj\str710_program.script -working_area 0 0x2000C000 0x4000 nobackup - #flash bank str7x 0 0 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/STR912Test/prj/str912_jtagkey.cfg =================================================================== --- testing/examples/STR912Test/prj/str912_jtagkey.cfg (revision 1112) +++ testing/examples/STR912Test/prj/str912_jtagkey.cfg (working copy) @@ -27,18 +27,16 @@ jtag_device 5 0x1 0x1 0x1e #target configuration -daemon_startup reset +target create target0 arm966e -endian little -chain-position 1 -variant arm966e +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false -#target -#target arm7tdmi -target arm966e little 1 arm966e - target_script 0 gdb_program_config .\prj\str912_program.script -working_area 0 0x50000000 16384 nobackup - #flash bank str7x 0 0 flash bank str9x 0x00000000 0x00080000 0 0 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg =================================================================== --- testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg (revision 1112) +++ testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg (working copy) @@ -25,18 +25,16 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi - target_script 0 reset .\prj\sam7s256_reset.script -working_area 0 0x00200000 0x4000 nobackup - #flash bank flash bank at91sam7 0 0 0 0 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg =================================================================== --- testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg (revision 1112) +++ testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg (working copy) @@ -22,16 +22,14 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi - -working_area 0 0x2000C000 0x4000 nobackup - #flash bank str7x 0 0 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg =================================================================== --- testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg (revision 1112) +++ testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg (working copy) @@ -24,16 +24,15 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi - target_script 0 reset .\prj\at91r40008_reset.script -working_area 0 0x3C000 0x4000 nobackup flash bank cfi 0x10000000 0x400000 2 2 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg =================================================================== --- testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg (revision 1112) +++ testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg (working copy) @@ -25,18 +25,16 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi - target_script 0 reset .\prj\sam7x256_reset.script -working_area 0 0x00200000 0x4000 nobackup - #flash bank flash bank at91sam7 0 0 0 0 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt Index: testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg =================================================================== --- testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg (revision 1112) +++ testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg (working copy) @@ -22,16 +22,14 @@ jtag_device 4 0x1 0xf 0xe #target configuration -daemon_startup reset +target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4 +[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false -#target -#target arm7tdmi -target arm7tdmi little 0 arm7tdmi-s_r4 - -working_area 0 0x40000000 0x4000 nobackup - #flash bank lpc2000 0 0 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger + +init +reset halt