hi folks,           2007/04/27
	
This xorg.conf file was sax generated at install time. The card
and the monitor were probed, correctly identified, and properly
configured without question on the first try.

The rub is that I had to *reinstall* the system in order for sax
to *see* and configure the KDS Rad display... always the display 
complained of horz sync out of range... way too high. 

A little background... the machine has an nvidia geforce card and
was originally attached to a Samsung 713V TFT monitor. We swapped 
in the permanent monitor KDS Radius Rad-5S 15" 1024x768 30-62 and
could not get the system to recognize the monitor, nor could we 
get sax2 to even start. Always the monitor complained about the 
horz sync being too high.

So, there appears to be something going on at install time that is
quite ( better ) from (post install) reconfig. Folks play havoc 
trying to reconfigure X video. Something needs to be improved so
that the system identifies a hardware change (plug and play) for a
new video card (or monitor) so that sax2 does her thing without any
manual fuss. 

Thanks folks.


Ps   The xorg.conf & SaX.log files are submitted hoping they will be 
     helpful identifying why this monitor was so hard to configure 
     manually.


Kind regards,

M Harris    <><


