HHi Ian, Thanks for the inquiry. You have found the right person, Our capability is excellent.
Please send me the gerber and requirments, Our engineers will check the manufacturability, and I'll give you a reasonable quotation. Please tell me your personal email, I'll take a large photo for you to evaluate the registration of our boards. Best Regards Mike Beijing Draco Electronics Ltd. +86 10 82634949 http://www.ezpcb.com [EMAIL PROTECTED] 2005-05-19 >Has anyone got good recommendations for high end PCB makers. We need >reasonable width and spacing (5 mil / 5 mil) but good drill rout accuracy. >Also, looking to minimise the solder mask expansion as far as possible for >a number of reasons - so need good solder mask registration. > >Our client is nervous about the normal PCB makers we normally use (here in >Australia). While lead time is not too important, it is not a >non-consideration. Europe, Asia or Canada/US are all acceptable if they >can do a quality job especially on registration of drill, rout and solder mask. > >Many thanks, >Ian Wilson > > >____________________________________________________________ >You are subscribed to the OT discussion forum > >To Post messages: >mailto:[email protected] > >Unsubscribe and Other Options: >http://techservinc.com/mailman/listinfo/ot_techservinc.com > >Browse or Search Old Archives (2001-2004): >http://www.mail-archive.com/[email protected] > >Browse or Search Current Archives (2004-Current): >http://www.mail-archive.com/[email protected] ____________________________________________________________ You are subscribed to the OT discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/ot_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
