Hi Brad, Depends if its laser cut or etched, about $350 - $500AUD $270 - $385 odd USD. 3-5 days turn size about the same, some places can't make them as large. Takes a while to burn that with manual paste placement, the lead time can be a problem also, most my clients don't have it.
Regards, Darren Moore > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Brad Velander > Sent: Wednesday, 7 September 2005 12:17 > To: [EMAIL PROTECTED]; Open Topic Forum > Subject: RE: [OT] Re: [PEDA] OT- SIPAD PCB's > > > Darren, Dennis, > Roughly what is it that you guys typically pay for a > screen? We get ours (typ. 15x15 in. or 20x20 in. > stainless/cast frame) on a 3 day turn for $380 CDN (approx. > $320US). However that may be priced for at least moderate > value sales. We probably purchase about 30 - 50 screens per year. > We buy screens for any prototype that's complex (SMT > comp count > 200, lots of fine pitch) or pretty much anything > that has a good chance of making it to full production. > > Sincerely, > Brad Velander > Senior PCB Designer > Northern Airborne Technology > #14 - 1925 Kirschner Road, > Kelowna, BC, V1Y 4N7. > tel (250) 763-2329 ext. 225 > fax (250) 762-3374 ____________________________________________________________ You are subscribed to the OT discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/ot_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
