Dnia 2012-01-03, o godz. 10:33:06
stacho <sta...@venco.com.pl> napisał(a):
>
> Ja mam tak i działa:
>
> DEVICE=ppp0
> ONBOOT=yes
> PPPOE_KERNEL=yes
> PPPOE_DEV=eth0
> AUTH=no
> PERSIST=yes
> DEFROUTE=yes
> USEPEERDNS=yes
> DEBUG=no
> PLUGIN_IFCFG_PASSWORD=yes
> PAPNAME=xxxxxx
> PASSWORD=xxxxx
>
> Tylko login i hasło musiałem dać do chap-secrets.
dodanie do
/etc/sysconfig/interfaces/ifcfg-ppp0
wpisu
PPPOE_DEV=eth0.8PPPOE_DEV=eth0
powoduje:
Podnoszenie interfejsu
ppp0............................................................................................................................................[
PROBLEMY ]
Plugin ifcfg-password.so loaded. Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
/usr/sbin/pppd: unrecognized option 'eth0.8'
pppd version 2.4.5
Usage: /usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial
line crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
jak dam
PPPOE_DEV=eth0
problemu nie ma ale wtedy nie mogę zestawić tunelu PPPoE bo nie trafia
do właściwego VLAN-u.
Czyżby skrypty nie przewidywały obsługi VLAN-ów ?
Jak sobie poradzić z tym problemem ?
Pozdrawiam
Krzysztof
_______________________________________________
pld-users-pl mailing list
pld-users-pl@lists.pld-linux.org
http://lists.pld-linux.org/mailman/listinfo/pld-users-pl
