There are 2 I2C controllers, map them both, removing the unimplemented one. Keep the OLED controller on the first I2C bus.
Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org> --- hw/arm/stellaris.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index 64e6797553a..655bf85e89e 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -1021,6 +1021,8 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) { 0x40004000, 0x40005000, 0x40006000, 0x40007000, 0x40024000, 0x40025000, 0x40026000}; static const int gpio_irq[NUM_GPIO] = {0, 1, 2, 3, 4, 30, 31}; + static const uint32_t i2c_addr[NUM_I2C] = {0x40020000, 0x40021000}; + static const int i2c_irq[NUM_I2C] = {8, 37}; /* Memory map of SoC devices, from * Stellaris LM3S6965 Microcontroller Data Sheet (rev I) @@ -1062,7 +1064,7 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) qemu_irq adc; int sram_size; int flash_size; - I2CBus *i2c; + DeviceState *i2c_dev[NUM_I2C]; DeviceState *dev; DeviceState *ssys_dev; int i; @@ -1195,14 +1197,18 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - if (DEV_CAP(2, I2C(0))) { - dev = sysbus_create_simple(TYPE_STELLARIS_I2C, 0x40020000, - qdev_get_gpio_in(nvic, 8)); - i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); - if (board->peripherals & BP_OLED_I2C) { - i2c_slave_create_simple(i2c, "ssd0303", 0x3d); + for (i = 0; i < NUM_I2C; i++) { + if (DEV_CAP(2, I2C(i))) { + i2c_dev[i] = sysbus_create_simple(TYPE_STELLARIS_I2C, i2c_addr[i], + qdev_get_gpio_in(nvic, + i2c_irq[i])); } } + if (board->peripherals & BP_OLED_I2C) { + I2CBus *bus = (I2CBus *)qdev_get_child_bus(i2c_dev[0], "i2c"); + + i2c_slave_create_simple(bus, "ssd0303", 0x3d); + } for (i = 0; i < NUM_UART; i++) { if (DEV_CAP(2, UART(i))) { @@ -1381,7 +1387,6 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* Add dummy regions for the devices we don't implement yet, * so guest accesses don't cause unlogged crashes. */ - create_unimplemented_device("i2c-2", 0x40021000, 0x1000); create_unimplemented_device("PWM", 0x40028000, 0x1000); create_unimplemented_device("QEI-0", 0x4002c000, 0x1000); create_unimplemented_device("QEI-1", 0x4002d000, 0x1000); -- 2.47.1