Am Mittwoch, 24. März 2021, 16:00:42 CET schrieb Dirk Eddelbuettel: > On 24 March 2021 at 14:47, Chris Evans wrote: > | I have just invested very few pennies in a Raspian machine hosted by my > | ISP. > | > | The machine tells me: > | > | root@www:~# cat /etc/os-release > | PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" > | NAME="Raspbian GNU/Linux" > | VERSION_ID="10" > | VERSION="10 (buster)" > | VERSION_CODENAME=buster > | ID=raspbian > | > | So I have added a line to /etc/apt/sources.list > | > | root@www:~# cat /etc/apt/sources.list > | deb http://raspbian.raspberrypi.org/raspbian/ buster main contrib non-free > | rpi deb http://archive.raspberrypi.org/debian/ buster main > | deb http://cloud.r-project.org/bin/linux/debian buster-cran40/ > > Hm, doesn't that third line make the heroic assumptions that there were a > non x86_64 repository? So I think the error below may be a side effect. > > Just because you are getting armhf packages from some repositories does not > imply you get them from all, methinks. apt may happily look at the > binary:all packages which it could install, but then get sidelined by their > dependencies which it may not.
Yes, at one point I did compile armhf arm64 packages for the CRAN repo on a raspberry that I still own, but the SD card broke and I do not have use case anyways, so I stopped that (this is documented on the CRAN repo). So sorry, at the moment, arm packages for current R are not on CRAN. For the moment, you can install R 3.5.2 from buster, or compile "locally", with apt-get build-dep r-base apt-get source -b r-base and install the packages that hopefully will appear. Johannes P.S.: Of course, if someone would once again upload R to buster-backports (and after the release of bullseye to bullseye-backports), this would be no problem any more. But that depends on one of the Debian devs to decide they want to maintain such a backport. > > Dirk > > | root@www:~# > | > | and added the key using > | > | apt-key adv --keyserver keys.gnupg.net --recv-key > | 'E19F5F87128899B192B1A2C2AD5F960A256A04AF' > | > | following > | https://cran.r-project.org/bin/linux/debian/#debian-buster-stable > | > | apt-get update > | > | runs fine but apt install -t buster-cran40 r-base gets me this: > | > | root@www:~# apt install -t buster-cran40 r-base > | Reading package lists... Done > | Building dependency tree > | Reading state information... Done > | Some packages could not be installed. This may mean that you have > | requested an impossible situation or if you are using the unstable > | distribution that some required packages have not yet been created > | or been moved out of Incoming. > | The following information may help to resolve the situation: > | > | The following packages have unmet dependencies: > | r-base : Depends: r-base-core (>= 4.0.4-1~bustercran.0) but it is not > | going to be installed| > | Depends: r-recommended (= 4.0.4-1~bustercran.0) but it is not > | going to be installed Recommends: r-base-html but it is not > | going to be installed > | Recommends: r-doc-html but it is not going to be installed > | > | E: Unable to correct problems, you have held broken packages. > | > | > | aptitude why-not r-base says: > | > | root@www:~# aptitude why-not r-base > | Not currently installed > | The candidate version 4.0.4-1~bustercran.0 has priority optional > | No dependencies require to remove r-base > | > | and aptitude install r-base says > | > | root@www:~# aptitude install r-base > | > | The following NEW packages will be installed: > | gfortran{a} gfortran-8{a} icu-devtools{a} libblas-dev{a} libblas3{a} > | libbz2-dev{a} libdrm-amdgpu1{a} libdrm-common{a} libdrm-nouveau2{a} > | libdrm-radeon1{a} libdrm2{a} libfile-basedir-perl{a} > | libfile-desktopentry-perl{a} libfile-mimeinfo-perl{a} libfontenc1{a} > | libgfortran-8-dev{a} libgfortran4{a} libgfortran5{a} libgl1{a} > | libgl1-mesa-dri{a} libglapi-mesa{a} libglvnd0{a} libglx-mesa0{a} > | libglx0{a} libicu-dev{a} libio-stringy-perl{a} > | libipc-system-simple-perl{a} libjpeg-dev{a} libjpeg62-turbo-dev{a} > | liblapack-dev{a} liblapack3{a} libllvm9{a} liblzma-dev{a} > | libncurses-dev{a} libncurses5-dev{a} libnet-dbus-perl{a} libpcre16-3{a} > | libpcre2-16-0{a} libpcre2-32-0{a} libpcre2-dev{a} libpcre2-posix0{a} > | libpcre3-dev{a} libpcre32-3{a} libpcrecpp0v5{a} libpng-dev{a} > | libpng-tools{a} libreadline-dev{a} libsensors-config{a} libsensors5{a} > | libtcl8.6{a} libtie-ixhash-perl{a} libtk8.6{a} libx11-protocol-perl{a} > | libxaw7{a} libxcb-dri2-0{a} libxcb-dri3-0{a} libxcb-glx0{a} > | libxcb-present0{a} libxcb-shape0{a} libxcb-sync1{a} > | libxml-parser-perl{a} libxml-twig-perl{a} libxml-xpathengine-perl{a} > | libxmu6{a} libxshmfence1{a} libxss1{a} libxv1{a} libxxf86dga1{a} > | libxxf86vm1{a} pkg-config{a} r-base{b} r-base-core{a} r-base-dev{ab} > | r-base-html{a} r-cran-boot{ab} r-cran-class{a} r-cran-cluster{a} > | r-cran-codetools{ab} r-cran-foreign{a} r-cran-kernsmooth{a} > | r-cran-lattice{a} r-cran-mass{a} r-cran-matrix{a} r-cran-mgcv{a} > | r-cran-nlme{a} r-cran-nnet{a} r-cran-rpart{a} r-cran-spatial{a} > | r-cran-survival{a} r-doc-html{a} r-recommended{ab} unzip{a} > | x11-utils{a} x11-xserver-utils{a} xdg-utils{a} zip{a} zlib1g-dev{a} > | > | 0 packages upgraded, 97 newly installed, 0 to remove and 0 not upgraded. > | Need to get 1,812 kB/89.4 MB of archives. After unpacking 716 MB will be > | used.| > | The following packages have unmet dependencies: > | r-cran-boot : Depends: r-base-core (>= 4.0.4-1~bustercran.0) but 3.5.2-1 > | is to be installed| > | Depends: r-api-4.0 which is a virtual package and is not > | provided by any available package| > | r-cran-codetools : Depends: r-base-core (>= 4.0.4-1~bustercran.0) but > | 3.5.2-1 is to be installed| > | Depends: r-api-4.0 which is a virtual package and is > | not provided by any available package| > | r-base : Depends: r-base-core (>= 4.0.4-1~bustercran.0) but 3.5.2-1 is to > | be installed r-recommended : Depends: r-base-core (>= > | 4.0.4-1~bustercran.0) but 3.5.2-1 is to be installed r-base-dev : > | Depends: r-base-core (>= 4.0.4-1~bustercran.0) but 3.5.2-1 is to be > | installed| > | The following actions will resolve these dependencies: > | Keep the following packages at their current version: > | 1) r-base [Not Installed] > | 2) r-base-dev [Not Installed] > | 3) r-cran-boot [Not Installed] > | 4) r-cran-codetools [Not Installed] > | 5) r-recommended [Not Installed] > | > | Leave the following dependencies unresolved: > | 6) r-base-core recommends r-recommended > | 7) r-base-core recommends r-base-dev > | > | I assume that I have some part of R 3.5.? stuck in the apt system from > | previously installing R from the default raspian repositories (stupid of > | me). There is nothing in /usr/lib/R (no directory) nor does /usr/bin/R > | exist and I have (in desperation: not something I remember doing often > | with Debian machines) even rebooted the machine but no change. > | > | I could wipe the machine and start over and not install R until after > | adding the buster line deb http://cloud.r-project.org/bin/linux/debian > | buster-cran40/ > | to /etc/apt/sources.list and doing apt-get update > | > | However, I thought I'd check things out here first. Thanks in advance for > | any suggestions. > | > | Chris > | > | -- > | Small contribution in our coronavirus rigours: > | https://www.coresystemtrust.org.uk/home/free-options-to-replace-paper-core > | -forms-during-the-coronavirus-pandemic/ > | > | Chris Evans <ch...@psyctc.org> Visiting Professor, University of Sheffield > | <chris.ev...@sheffield.ac.uk> I do some consultation work for the > | University of Roehampton <chris.ev...@roehampton.ac.uk> and other places| > | but <ch...@psyctc.org> remains my main Email address. I have a work web site at: > | https://www.psyctc.org/psyctc/ > | > | and a site I manage for CORE and CORE system trust at: > | http://www.coresystemtrust.org.uk/ > | > | I have "semigrated" to France, see: > | https://www.psyctc.org/pelerinage2016/semigrating-to-france/ > | https://www.psyctc.org/pelerinage2016/register-to-get-updates-from-pele > | rinage2016/| > | If you want an Emeeting, I am trying to keep them to Thursdays and my diary is at: > | https://www.psyctc.org/pelerinage2016/ceworkdiary/ > | > | Beware: French time, generally an hour ahead of UK. > | > | _______________________________________________ > | R-SIG-Debian mailing list > | R-SIG-Debian@r-project.org > | https://stat.ethz.ch/mailman/listinfo/r-sig-debian -- Johannes Ranke Wissenschaftlicher Berater 07624 8099027 https://jrwb.de _______________________________________________ R-SIG-Debian mailing list R-SIG-Debian@r-project.org https://stat.ethz.ch/mailman/listinfo/r-sig-debian