Thank you so much that seems to be the ticket.
________________________________
From: [email protected] <[email protected]> on
behalf of iamkeith <[email protected]>
Sent: Friday, March 28, 2025 1:19 PM
To: RBW Owners Bunch <[email protected]>
Subject: [RBW] Re: 650b conversion of 700c canti bike
>From one of the descriptions:
MCS Brake Post Extender Description:
The MCS Brake Post Extenders is a simple way to move your brake mounts if your
brake pads aren't quite lining up with your rim. You might be putting a 1-1/8"
or 1-3/8" wheel on a frame intended for a 1.75" or vice versa. With these brake
post extenders, you can move your brakes either 16mm forward or backward
depending on your application.
Note: You will need to swap the sides that the extenders are on to change the
orientation.
On Friday, March 28, 2025 at 12:09:02 PM UTC-6 iamkeith wrote:
I have no experience or wisdom to share but, unless the brake posts were
mounted unusually low and you could use the adjustability of Paul Motolites or
similar, it seems the process would have to start with using a pair of these
extenders in the opposite manner from which they were intended. Cheap way to
experiment. If you scroll down on the page, there are other, similar devices:
https://www.danscomp.com/promax-brake-post-extender-black-ba21-0000pe01-bk/p1441682?gad_source=1&gclid=Cj0KCQjwkZm_BhDrARIsAAEbX1HTGdB4vVYiA7qBgEm96CxZ-5nmIYddR9yCoWdOUDklrswRu29zC1EaArRUEALw_wcB
On Friday, March 28, 2025 at 10:49:38 AM UTC-6 [email protected] wrote:
Have any of you converted a700c canti bike to 650b using the canti studs?
Ideas?
Bernard
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
[email protected]<mailto:[email protected]>.
To view this discussion visit
https://groups.google.com/d/msgid/rbw-owners-bunch/74feea18-e649-4357-a869-aa08d8736a4cn%40googlegroups.com<https://groups.google.com/d/msgid/rbw-owners-bunch/74feea18-e649-4357-a869-aa08d8736a4cn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/rbw-owners-bunch/CH2PR17MB37200714F3242A8DCD687572CDA02%40CH2PR17MB3720.namprd17.prod.outlook.com.
