Thanks guys, Follow up:
When providing a three-line drawing, in New York, on a new construction, few story building, which means they'll have a ground rod (hopefully) at the Main cabinet, do you think it's necessary to detail any ground connections from the solar to the water pipes? No right? (Unusual inspector) They are totally different systems when there is a Grounding Electrode present. In modern construction practices, they are bonding the water pipes only, not using the water pipes as any part of the grounding electrode system and therefore don't come into play? And then, If on top of this building, there was a Satcon inverter, on the roof, and that Satcon was getting grounded to the structural, can I run just one ground wire to the roof, or do I need to run a ground conductor and some kind of bond wire? And again, the water pipes are not involved here, at all. With appreciation, Ryan J. LeBlanc NABCEPT Certified Solar PV Installer Cell: 707.591.1950 Direct: 707.536.9839 r...@naturalenergyworks.com http://www.NaturalEnergyWorks.com _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org