Linux version 2.2.14-5.0 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Tue Mar 7 20:53:41 EST 2000 Detected 350802588 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 699.60 BogoMIPS Memory: 257596k/262080k available (1084k kernel code, 416k reserved, 2920k data, 64k init, 0k bigmem) Dentry hash table entries: 262144 (order 9, 2048k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: AMD AMD-K6(tm) 3D processor stepping 0c Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf0560 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: BIOS reporting unknown device 00:50 PCI: Device 00:51 not found by BIOS Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9, DID=5229 PCI_IDE: not 100% native mode: will probe irqs later PCI_IDE: simplex device: DMA disabled ide0: PCI_IDE Bus-Master DMA disabled (BIOS) PCI_IDE: simplex device: DMA disabled ide1: PCI_IDE Bus-Master DMA disabled (BIOS) hda: Maxtor 90750D6, ATA DISK drive hdc: MATSHITA CR-588, ATAPI CDROM drive hdd: RICOH CD-R/RW MP7060A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: Maxtor 90750D6, 7157MB w/512kB Cache, CHS=912/255/63 hdc: ATAPI 32X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 hdd: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 771.906 MB/sec p5_mmx : 736.092 MB/sec 8regs : 478.536 MB/sec 32regs : 339.471 MB/sec using fastest function: pII_mmx (771.906 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 ide0: reset: success hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 ide0: reset: success hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=19037025, sector=0 end_request: I/O error, dev 03:06 (hda), sector 0 > hda3 autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed Adding Swap: 618460k swap-space (priority -1) Creative SBLive! at 0x9800 on irq 5