Re: [gentoo-user] emerge problem with e100
On my system with an e100 I built it as a module during the kernel build and then load it at startup. Did you try that? On Sun, 23 Jan 2005, Richard Foltyn wrote: > On Sun, 2005-01-23 at 00:21 +0100, pat wrote: >> Hi All, >> >> I've setup new system and compile the kernel (2.6.10-r1) and I want to >> install >> network card. I did "emerge e100" after kernel compilation, but I have >> received error (in attachement). Did I something wrong ??? > > Maybe you don't really need the e100 package to get your NIC running. > The necessary module should be part of every kernel and works without > problems. I don't even have the e100 package installed. > > My NIC: > Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) > Ethernet Controller (rev 42) > > Kernel Config: > CONFIG_E100=m > CONFIG_E100_NAPI=y > > Hope this helps, > richard > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] emerge problem with e100
On Sun, 2005-01-23 at 00:21 +0100, pat wrote: > Hi All, > > I've setup new system and compile the kernel (2.6.10-r1) and I want to install > network card. I did "emerge e100" after kernel compilation, but I have > received error (in attachement). Did I something wrong ??? Maybe you don't really need the e100 package to get your NIC running. The necessary module should be part of every kernel and works without problems. I don't even have the e100 package installed. My NIC: Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) Kernel Config: CONFIG_E100=m CONFIG_E100_NAPI=y Hope this helps, richard signature.asc Description: This is a digitally signed message part
Re: [gentoo-user] emerge problem with e100
On Sun, 23 Jan 2005, pat wrote: > I've setup new system and compile the kernel (2.6.10-r1) and I want to install > network card. I did "emerge e100" after kernel compilation, but I have > received error (in attachement). Did I something wrong ??? See warning at the top: >Makefile:174: *** >Makefile:175: *** Warning: kernel source version (2.6.10) >Makefile:176: *** does not match running kernel (2.6.9-gentoo-r1) >Makefile:177: *** Continuing with build, >Makefile:178: *** resulting driver may not be what you want >Makefile:179: *** >Makefile:197: *** >Makefile:202: *** Warning: kernel source configuration (UP) >Makefile:203: *** does not match running kernel (SMP) >Makefile:205: *** Continuing with build, >Makefile:206: *** resulting driver may not be what you want >Makefile:207: *** You are upgrading kernels so you need to do some more work. Does /usr/src/linux point to /usr/src/linux-2.6.10 ??? Assuming you made the link, then try going into /usr/src/linux-2.6.10 and run "make menuconfig" so it builds a config file (just run then exit again). Then copy the config for your existing kernel to the new kernel: cp /usr/src/linux-2.6.9-gentoo-r1/.config /usr/src/linux-2.6.10 Then run "make oldconfig" to update your existing config to the new kernel. Then you can do: make && make modules & make modules_install And finally emerge the e100 package too. -- -- gentoo-user@gentoo.org mailing list
[gentoo-user] emerge problem with e100
Hi All, I've setup new system and compile the kernel (2.6.10-r1) and I want to install network card. I did "emerge e100" after kernel compilation, but I have received error (in attachement). Did I something wrong ??? Thanks Pat emerge.e100 Description: Binary data -- gentoo-user@gentoo.org mailing list