Hi Kimberly,
Most of what I work with is mouse tissue and I've found the brains to be a bit
tricky because they both hydrate and dry out quickly. I normally keep the
paraffin blocks on an ice for about 2 hours (after they've been fully faced
in), checking periodically to make sure the tissue is not overhydrating. When I
section, I can normally only take a few sections before the brain starts to dry
out again (you can tell when you start to see scratches and dry white areas on
the tissue). Most of the blocks are ready to cut again after a few additional
minutes back on the ice.
For thicker sections (up to 20um), I take use the wooden stick of a cotton swab
and hold it against the base of the paraffin block as I cut the section. The
section will curl around the stick and you can roll it out flat on the water
bath to smooth it out.
Hope this helps!
Anna Coffey, MS, HTL(ASCP)CM
Histotechnologist
Center for Advanced Preclinical Research
Frederick National Laboratory for Cancer Research
Leidos Biomedical Research, Inc.
Bld 539, 224
Frederick, Maryland 21702
301-846-1730
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet