Re: Topband: Radial Attachment Plate
I had a DX Engineering radial plate on my P40A 160m vertical and had zero corrosion. You could cut one in half to go around the tower. Rolling up multiple attached wires would likely become a tangles mess. You should be able to find suitable stainless steel angle at Mc-Master Carr, drilling a Ø5/8 hole is easy. You could also drill multiple holes and bolt the radials directly to the angle. https://www.mcmaster.com/products/angles/material~stainless-steel-2/corrosio n-resistant-316-stainless-steel-6/ John KK9A Stan Stockton k5go wrote: Jim, Thanks for pointing me to that review. I looked at that picture. These are 304 grade stainless. DX Engineering's plate is the same - 304 stainless steel which is not the best for corrosion resistance. 316 would be much better. Those in the review were installed on a table 100 feet from the sea with the crappy sheet metal screws included that will definitely corrode. Of course there is a huge difference between 75 or 100 feet and 5 miles from the salt water regarding corrosion. My plan is to get all my radials attached and then perhaps spray the whole thing with liquid electrical tape and deploy it when I am there for a few months a year. Then I will roll the radials up and store it intact when I am not there, relying on however many radials I have buried during the off season. In my application I want it around a tower which this will do and the DX Engineering plate will not. There are several sizes and the smallest one which would be good for a vertical made from aluminum tubing would only cost $7.99 delivered. Can't beat that deal. What I need now is a stainless steel angle the right size and preferably with a 5/8" hole to mount an SO-239 to the radial plate. 73...Stan _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Radial Attachment Plate
Jim, Thanks for pointing me to that review. I looked at that picture. These are 304 grade stainless. DX Engineering's plate is the same - 304 stainless steel which is not the best for corrosion resistance. 316 would be much better. Those in the review were installed on a table 100 feet from the sea with the crappy sheet metal screws included that will definitely corrode. Of course there is a huge difference between 75 or 100 feet and 5 miles from the salt water regarding corrosion. My plan is to get all my radials attached and then perhaps spray the whole thing with liquid electrical tape and deploy it when I am there for a few months a year. Then I will roll the radials up and store it intact when I am not there, relying on however many radials I have buried during the off season. In my application I want it around a tower which this will do and the DX Engineering plate will not. There are several sizes and the smallest one which would be good for a vertical made from aluminum tubing would only cost $7.99 delivered. Can't beat that deal. What I need now is a stainless steel angle the right size and preferably with a 5/8" hole to mount an SO-239 to the radial plate. 73...Stan On Mon, Oct 30, 2023 at 5:53 PM Jim Brown wrote: > On 10/30/2023 3:25 PM, Stan Stockton wrote: > > If you are interested send me an email and I will send you a picture of > the > > thing put together. > > I think it will help with my corrosion problem and wanted to share the > > information. > > A caution, Stan. One of the reviews notes corrosion after six months. > > I'm using the DX Eng radial plate. Pricy, but 17 years later, not a > sniff of corrosion, 5 miles from the Pacific. > > 73, Jim K9YC > _ > Searchable Archives: http://www.contesting.com/_topband - Topband > Reflector > _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Re: Topband: Radial Attachment Plate
On 10/30/2023 3:25 PM, Stan Stockton wrote: If you are interested send me an email and I will send you a picture of the thing put together. I think it will help with my corrosion problem and wanted to share the information. A caution, Stan. One of the reviews notes corrosion after six months. I'm using the DX Eng radial plate. Pricy, but 17 years later, not a sniff of corrosion, 5 miles from the Pacific. 73, Jim K9YC _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Topband: Radial Attachment Plate
In preparing to head to ZF9CW in about ten days, I wanted to take something that would allow me to do a better job on my radials under my shunt fed tower. With the thing so close to salt water the detriment is that everything corrodes in a short period of time. I was looking for something to help solve my problem and found this on Amazon: https://www.amazon.com/dp/B08N6X576D?psc=1&ref=ppx_yo2ov_dt_b_product_details You can add however many you want to size a square or most any shape to surround a vertical or tower. I will likely use 8 of them to make a square to go around a 55G tower if I decide to use that one someday. In my case, since I cannot run radials onto my neighbors property I will only use three of them to go around my 25G tower. The holes are M6 size. I put together four of these plates in a square and have stainless steel M6 hardware installed in the 28 holes. Even for this small version you could have 3 radials to each connection point and have 84 radials. If you are interested send me an email and I will send you a picture of the thing put together. I think it will help with my corrosion problem and wanted to share the information. 73...Stan, K5GO/ZF9CW/ZF5T _ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector