Re: [AFMUG] Require Recent Web Browser?

As long as netscape still works I am good. From: Sean Heskett Sent: Thursday, March 15, 2018 11:14 PM To: af@afmug.com Subject: Re: [AFMUG] Require Recent Web Browser? Use modern technologies. Your customer base is tech savvy enough and should not be using old browsers and if they are then

Re: [AFMUG] [WISPA Members] Down tilt for 450i

I'd tip it down a few degrees and call it a day... just like I do with any other sector. On Thu, Mar 15, 2018 at 11:33 PM, Jeff Broadwick - Lists wrote: > I’d put it into LinkPlanner. > > Jeff Broadwick > CTIconnect > 312-205-2519 Office > 574-220-7826 Cell > jbroadw...@cticonnect.com > > > On M

Re: [AFMUG] Require Recent Web Browser?

Yes, that would be perfect. Actually what I want to use is a java applet for part of the interface and webassembly for part. I think that all browsers stopped supporting java applets before they added webassembly. So you'll have to install both an ancient browser from around 2015 and a modern b

Re: [AFMUG] [WISPA Members] Down tilt for 450i

+1 billion on that. On 3/15/2018 11:33 PM, Jeff Broadwick - Lists wrote: I’d put it into LinkPlanner. Jeff Broadwick CTIconnect 312-205-2519 Office 574-220-7826 Cell jbroadw...@cticonnect.com On Mar 14, 2018, at 8:25 PM, Jay Weekley wrote: Actually, we'll probably only want to cover 5 mil

[AFMUG] Mimosa confirms the USA is weird

So... I'm Canadian and mix metric and us units all the time. But isn't it weird to have a combination of metric and US in one piece of hardware? http://backhaul.help.mimosa.co/backhaul-install-b24-installation-mounting-alignment 10mm *and *a 5/16"? This will drive Europeans nuts. At least with

Re: [AFMUG] Cross posting

testing 1 2 3 On Thu, Mar 8, 2018 at 10:33 AM, Chuck McCown wrote: > I really should stop by and learn how they do what they do. > > *From:* Frank Befera > *Sent:* Wednesday, March 07, 2018 2:57 PM > *To:* wispamer...@wispa.org > *Subject:* [Wispamerica] Real IPTV for your WISP - We Can Do This!

Re: [AFMUG] [WISPA Members] Down tilt for 450i

Most likely zero...but here’s how we do it. Hang the AP and aim it where you think it should be aimed and leave the doentilt at zero (unless you have a huge height difference like a 1000’ feet or more) then Install 2-4 SMs, or have your installers hang out with an SM connected to the AP scattered

Re: [AFMUG] Down tilt for 450i

Are you setting up all of your 900mhz 450I to be dual-pol instead of dual-slant? That simplifies procuring antennas but is not to Cambium standard. It depends how flat the ground around you is, but at that distance the downtilt will usually be zero. On Thu, Mar 15, 2018 at 10:03 PM, Jay Weekley w

Re: [AFMUG] Require Recent Web Browser?

As I see it, the only time it might be a problem, is if I'm using a field laptop that lives in the truck and doesn't get updated very often... but as long as the basic functions work with old browsers, it really shouldn't be a big deal. On Thu, Mar 15, 2018 at 10:38 PM, Darin Steffl wrote: > Don

Re: [AFMUG] Expenses

Yeah, that may be, but the medical advice here is excellent... as long as you know a good plumber... On Thu, Mar 15, 2018 at 10:30 PM, Mark Radabaugh wrote: > Tax advice from a mailing list is worth every penny you paid for it. If > you want to get creative with the tax code, hire a tax accoun

Re: [AFMUG] Down tilt for 450i

Depends on haat. On Thu, Mar 15, 2018 at 10:03 PM Jay Weekley wrote: > We're putting up a KP Performance KPPA-900DP-90S for use with the 900 > MHz 450i APs. How much down tilt would you use to serve customers up to > 7 miles away? It has zero electrical down tilt > -- Philip J. Rankin Wirele

Re: [AFMUG] Expenses

Ask your accountant. Every state has different laws, etc. Personal medical expenses can be deducted from your personal taxes if they are over a certain amount. Pay yourself dividends or draws from the company to cover the expense, and then write it off on your personal return. Travis On 3/1

[AFMUG] RF Calibration Failure ADI Catalina R0 chip not supported!

Hi All, I’ve never seen this before…but it looks like I have a broken AP…any way to fix without a climb?? 450 AP 2.4Ghz Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV Silo Wi

Re: [AFMUG] Expenses

Actually. I’m looking at having a fellow down by you do it :). Maybe I’ll stop in and say hi during recovery. > On Mar 15, 2018, at 20:42, Faisal Imtiaz wrote: > > I guess it depends on who does the surgery. > > If you can get your local plumber or car mechanic to do it, then I am sure > you

Re: [AFMUG] Expenses

Yes. But after it had healed from an off the job injury. > On Mar 15, 2018, at 21:02, Keefe John wrote: > > Did you hurt it on the job? > > Keefe > > >> On 3/14/2018 4:52 PM, Matt Hoppes wrote: >> So I got to thinking about something today. >> >> Pretty much anything needed to run the busin

Re: [AFMUG] Expenses

I like the way you think... he did ask for creative options, after all! On Thu, Mar 15, 2018, 7:42 PM Faisal Imtiaz wrote: > I guess it depends on who does the surgery. > > If you can get your local plumber or car mechanic to do it, then I am sure > you can expense it ! > > :) > > > Faisal Imtia

Re: [AFMUG] The things in Slack...

ok, i posted this like 2 pm yesterday - Original Message - From: CBB - Jay Fuller To: af@afmug.com Sent: Thursday, March 15, 2018 8:22 PM Subject: Re: [AFMUG] The things in Slack... i'd select young hot college townsmaybefor 1000 alex? lol - Original

Re: [AFMUG] PMP 320 SM Power Supply

The 320 CPE is Gemtek OEM. It's 802.3af. It's only the 320 and 430 APs that were the stupid split-pair power scheme, passive 48VDC only. On 3/15/2018 1:05 PM, Sean Heskett wrote: i don't think it's in compliance with those standards. i believe it uses the same power scheme as the PMP430 AP whi

Re: [AFMUG] Fwd: 8 hours no lunch

Yo o mi trabajo? No soy chico facile Jaime Solorza On Thu, Mar 15, 2018, 6:46 PM Faisal Imtiaz wrote: > que lindo ! > > Faisal Imtiaz > Snappy Internet & Telecom > http://www.snappytelecom.net > > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

[AFMUG] Making epmp connect faster/ site survey

Im going to be asking alot of installer questions for a while btw, these nitwits werent bothering to learn the gear. Epmp, is it just slow? I set a low minimum snr, 4, low minimum rssi, 90. I pare the scan list sometimes clear down to one channel. I use monitor wireless til in connects, then tool

Re: [AFMUG] 8 hours no lunch

Thankslots of planning goes into these enclosures before we execute. I have shown you bare back board to completed non landed panel.. I will share in the field connections ...there are videos on line to help with building these. I have learned allot from Vernon...I have seen him eat engineer

Re: [AFMUG] something ain't right

so - disreguard - cambium actually got back to me before this message even posted to the list. good job cambium! - Original Message - From: CBB - Jay Fuller To: af@afmug.com Sent: Thursday, March 15, 2018 4:12 PM Subject: something ain't right we just hooked up two new