Op maandag 29-11-2010 om 23:07 uur [tijdzone +0100], schreef Stefan
Salewski:
> On Mon, 2010-11-29 at 21:53 +0100, Richard Rasker wrote:
>
> >
> > Is there a way to change the solder mask on only one side of the board,
> > but not the other side? When I use the K key over a via, the solder mask
>
On Mon, 2010-11-29 at 21:53 +0100, Richard Rasker wrote:
>
> Is there a way to change the solder mask on only one side of the board,
> but not the other side? When I use the K key over a via, the solder mask
> changes on both sides.
>
It may be possible to make vias covered with solder mask, an
Hello,
I'm working on a design with a largish (23x23 @ 0.8mm pitch) BGA chip,
with vias to accomodate the fanout of the inner rows of pins.
Now I would like to have these vias covered by the solder mask on the
top layer (where the BGA device sits), but not on the bottom layer --
the latter so tha
3 matches
Mail list logo