Eric Van Tol wrote:
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:juniper-nsp-
>> [EMAIL PROTECTED] On Behalf Of W. Kevin Hunt
>> Sent: Monday, October 13, 2008 3:37 PM
>> To: juniper-nsp@puck.nether.net
>> Subject: [j-nsp] M10i Junos 8.0
&g
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:juniper-nsp-
> [EMAIL PROTECTED] On Behalf Of W. Kevin Hunt
> Sent: Monday, October 13, 2008 3:37 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] M10i Junos 8.0
>
> Is there a default rate limit on pa
Are you logging into the RE from the management interface? Any chance
there is a duplex problem on the switch that it plugs into? I have
seen really slow speeds on transfers to an RE, only to find the issue
is related to a switch problem ...
Truman
On 13/10/2008, at 3:36 PM, W. Kevin Hunt
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ext W. Kevin
Hunt
Sent: Monday, October 13, 2008 4:37 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] M10i Junos 8.0
Is there a default rate limit on packets destined to the RE ?
I've got terribly sluggish CLI on one of my boxes, but no
Is there a default rate limit on packets destined to the RE ?
I've got terribly sluggish CLI on one of my boxes, but nothing jumps out
as the possible cause.
No ddos against the router's interfaces, netflow sampling has been
turned off, etc...
Load and cpu usage are both very low as checked by
5 matches
Mail list logo