Re: [Elecraft] How to allow K3S to feed multiple logging programs on my laptop?
I can vouch for Win4K3Suite - I currently have DXKeeper(DXCommander), N1MM, WSJT, FLDigi, MRP40 and others all connected. The only problem I still have is WSJT and FLDigi fight a little for which mode the radio should be in to do a certain task. I just stop the one not being used and all is fine. He gives you 30 days free of full functionality to see if you can make it go with what you want. I haven't looked back with my station and haven't had to reconfigure my digital programs and loggers once since implementing it when switching modes. It is in my mind a software incarnation of a CI-V router for Icom radios. It has unlocked a lot of operating ease with my K3 and K3S. Regards, Grant VK5GR -Original Message- From: Tom [mailto:elecraft.l...@videotron.ca] Sent: Thursday, 28 May 2020 5:34 AM To: 'Tom Norris NB5Q'; 'Elecraft List Server' Subject: Re: [Elecraft] How to allow K3S to feed multiple logging programs on my laptop? Hi Win4K3Suite has built in virtual radios. You can run up to 6 program simultaneously. Watch the video on third party products here: https://va2fsq.com/tutorials/ 73 Tom -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Tom Norris NB5Q Sent: May 27, 2020 3:33 PM To: Elecraft List Server Subject: [Elecraft] How to allow K3S to feed multiple logging programs on my laptop? I have K3S Serial Number 11459 and a P3 and would like to communicate with N3FJP ACLog and SKCCLogger at the same time or one of the logging programs and the K3 Utility. Technology has raced past me! Is the bottle neck with only one com port available from the K3S? Thanks, Tom NB5Q __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to elecraft.l...@videotron.ca -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA500 fan won't shut off
Eric, I reloaded the firmware tonight – no change (in fact I upgraded it from 1.47 to 1.54). If I plug the mains cable in the fans power up immediately. If I then turn the amplifier on, the amp works normally. When I power it off from software or the front panel the fans spin up and stay running. Is there something I can look at here in VK I wonder? I really don’t want to have to ship it back to Elecraft for this. Regards, Grant VK5GR From: Eric Norris [mailto:norrislawfi...@gmail.com] Sent: Tuesday, 26 November 2019 2:20 PM To: VK5GR Cc: elecraft@mailman qth. net Subject: Re: [Elecraft] KPA500 fan won't shut off Reload the firmware. 73 Eric WD6DBM On Mon, Nov 25, 2019, 6:51 PM VK5GR wrote: FAN CTL = NOR FANs are idle while the amp is turned on - amp ambient temp was 27C at the time (it was powered up and had been idle for about 20 minutes). I then turned the amplifier off via the front panel push button. I would have expected the FANs to start up for about 10 seconds as they discharge the 60V rail supply but instead the FANs continue to run. the only way to turn them off is to unplug the amp from the mains supply. It is definitely a fault condition and not a menu selection. Thoughts? -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to norrislawfi...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA500 fan won't shut off
FAN CTL = NOR FANs are idle while the amp is turned on - amp ambient temp was 27C at the time (it was powered up and had been idle for about 20 minutes). I then turned the amplifier off via the front panel push button. I would have expected the FANs to start up for about 10 seconds as they discharge the 60V rail supply but instead the FANs continue to run. the only way to turn them off is to unplug the amp from the mains supply. It is definitely a fault condition and not a menu selection. Thoughts? -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KPA500 fan won't shut off
Folks, Has there been any further word on this fault? I have just had the same thing happen to me and am wondering if it could be the same issue? Regards, Grant VK5GR -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
