Re: [Gambas-user] ERROR Segmentation fault (core dumped)
Den 03. juni 2015 14:23, skrev Benoît Minisini: > Le 02/06/2015 20:52, Jørn Erik Mørne a écrit : >> The problem persists with me since about 7104 as reported by Herberth. >> Tried on two Arch systems. >> > Please use the latest revision. > > Regards, > Success :) -- ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] ERROR Segmentation fault (core dumped)
The problem persists with me since about 7104 as reported by Herberth. Tried on two Arch systems. -- ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] ERROR Segmentation fault (core dumped)
Hmm only difference is I have 64-bit. Any recently added dependencies? Den 30. mai 2015 00:34, skrev Benoît Minisini: > Le 29/05/2015 21:45, Jørn Erik Mørne a écrit : >> I have it installed though >> > So I have compiled and installed the latest trunk on a Mint 17.1 64 bits > and on a ArchLinux 32 bits: everything works as expected, no crash at > all... Strange! > -- ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] ERROR Segmentation fault (core dumped)
Den 29. mai 2015 21:44, skrev Charlie Reinl: > Am Freitag, den 29.05.2015, 21:07 +0200 schrieb Benoît Minisini: >> Le 29/05/2015 20:50, Charlie Reinl a écrit : >>> Am Freitag, den 29.05.2015, 20:15 +0200 schrieb Benoît Minisini: Le 29/05/2015 19:55, Charlie Reinl a écrit : > Salut, > > here also Lubuntu 14.04.2 LTS > gambas3 rev 7103 > when starting gambas IDE, here the valgrin log > > Do you have gb.qt5 installed or not? >>> Salut Benoît, >>> >>> how can I check this, in Synaptic by searching 'qt5', shows a lot of >>> files with qt5 are installed. >>> I send you the compile logs. >>> >> I'm talking about 'gb.qt5'! The answer is in the 'configure.log' file: >> >> || >> || THESE COMPONENTS ARE DISABLED: >> || - gb.db.postgresql >> || - gb.gtk3 >> || - gb.jit >> || - gb.qt5 >> || - gb.qt5.opengl >> || - gb.qt5.webkit >> || - gb.sdl2 >> || - gb.sdl2.audio >> || >> >> So you don't have gb.qt5 installed. >> > oh, yeah, mostly using his ability to read, saves a lot of time. > > Sorry > I have it installed though -- ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] ERROR Segmentation fault (core dumped)
Yupp, same here! KDE5 and Arch Linux. Happened with yestreday's commit. Den 29. mai 2015 19:41, skrev herberth guzman: > Install gambas3 > svn update Gambas 7104 > > I get the following error. > > Segmentation fault (core dumped) > > Previously discharged > He installed and all good > > I do not have Gambas3. > > that I can do. > I never happened to me. > > > Regards, > Herberth > -- > ___ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user -- ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] 2/3 installation package made...
Hi! When trying to make an installation package from the attached component, it only generates the *-gtk and *-qt4 package, and not the main&plain package (for lack of better term). I also notice setting Form's Border=False under QT5 is not working. Cheers! gb.notify-0.0.1.tar.gz Description: application/gzipped-tar -- One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Some playing on logo redesing
There were some really good shrimp drawings here: http://depositphotos.com/vector-images/shrimp.html?2up78v Den 28. feb. 2015 22:32, skrev Kevin Fishburne: > shrimp icon -- Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Missing component-pictures in Arch Linux
Den 26. feb. 2015 01:45, skrev Benoît Minisini: > Le 26/02/2015 01:42, Jørn Erik Mørne a écrit : >> Den 26. feb. 2015 01:26, skrev Benoît Minisini: >>> Le 26/02/2015 01:15, Jørn Erik Mørne a écrit : >>>> Den 26. feb. 2015 01:04, skrev Benoît Minisini: >>>>> Le 24/02/2015 12:13, Jørn Erik Mørne a écrit : >>>>>> For some reason, some component-pictures are missing in Arch Linux: >>>>>> >>>>>> missing pictures >>>>>> >>>>>> missing pictures >>>>>> >>>>>> missing pictures >>>>>> >>>>>> missing pictures >>>>>> >>>>>> missing pictures >>>>>> >>>>>> missing pictures >>>>>> >>>>>> Kind regards >>>>> Can you give some details? What are you talking about? >>>>> >>>> Sorry the attachments "fell out of the mail" :) >>>> >>>> Trying once more! >>>> >>> These icons should be located in /usr/share/gambas3/control, so I guess >>> Gambas is wrongly installed on your system. >>> >>> Can you check? How did you install it? >>> >> They seem to be present. >> >> From pacman. >> > That's bad: each control icon must be located in an intermediate > directory having the name of the component. > That should be it! -- Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Missing component-pictures in Arch Linux
Den 26. feb. 2015 01:04, skrev Benoît Minisini: Le 24/02/2015 12:13, Jørn Erik Mørne a écrit : For some reason, some component-pictures are missing in Arch Linux: missing pictures missing pictures missing pictures missing pictures missing pictures missing pictures Kind regards Can you give some details? What are you talking about? Sorry the attachments "fell out of the mail" :) Trying once more! -- Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Missing component-pictures in Arch Linux
For some reason, some component-pictures are missing in Arch Linux: missing pictures missing pictures missing pictures missing pictures missing pictures missing pictures Kind regards -- Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Possible bug on offline help
Den 24. jan. 2015 23:56, skrev Tobias Boege: > On Sat, 24 Jan 2015, J??rn Erik M??rne wrote: >> Den 28. nov. 2014 20:46, skrev Beno??t Minisini: >>> Le 28/11/2014 16:46, Gian a ??crit : Il 28/11/2014 16:32, Beno??t Minisini ha scritto: > Mmm... Did you download the offline documentation? No Benoit, I was online when I downloaded the help according to your instructions (http://gambas.8142.n7.nabble.com/Support-for-offline-help-td47438.html). I did it because a friend of ours Gambas-it.org reporting the issue. Thanks for interest. Regards Gianluigi >>> Does it change anything if you choose the english language in the help >>> window? >>> >>> The offline help is installed in '~/.local/share/gambas3/wiki'. Can you >>> check it is present? >>> >> Now I get what you meant! I see mine is set to "Default language" and >> that was the reason why it has not worked all along. Setting it to >> "English (common)" works! Perhaps, when there is no translation of the >> documentation in the default language, it should automatically fall back >> to English? That would be super! >> > I thought this was already fixed on 19th Nov[0]? Maybe it didn't work on > your side because the pre-19th-Nov pages are cached? > > Regards, > Tobi > > [0] http://sourceforge.net/p/gambas/mailman/message/33042310/ > Clearing the cache did not help... -- New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Possible bug on offline help
Den 28. nov. 2014 20:46, skrev Benoît Minisini: > Le 28/11/2014 16:46, Gian a écrit : >> Il 28/11/2014 16:32, Benoît Minisini ha scritto: >>> Mmm... Did you download the offline documentation? >> No Benoit, >> I was online when I downloaded the help according to your instructions >> (http://gambas.8142.n7.nabble.com/Support-for-offline-help-td47438.html). >> I did it because a friend of ours Gambas-it.org reporting the issue. >> Thanks for interest. >> Regards >> Gianluigi >> > Does it change anything if you choose the english language in the help > window? > > The offline help is installed in '~/.local/share/gambas3/wiki'. Can you > check it is present? > Now I get what you meant! I see mine is set to "Default language" and that was the reason why it has not worked all along. Setting it to "English (common)" works! Perhaps, when there is no translation of the documentation in the default language, it should automatically fall back to English? That would be super! Kind regards! -- New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] How do I directly access the child controls in a panel container.
> Hello, > > > > One can address a control on another form with fMain.txtHello.Text. This > syntax also works for other container objects. I have a form with a panel > control. There are several controls within the panel. To avoid naming > conflicts I want to keep the panel controls separate from the parent form. > Something like panel.txtEdit.Text would be great but, it does not work. I > can get the "children" collection of the panel and get the control names. > That does not help. I need to get to the control and use its properties and > events. Is there a way to do this? > > > > Thanks > This is the way: Panel1.Children[1].Text -- Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] fullscreen
> Never never never never ! > > I haqd a small Problem. Loss of Fullscreen property of Form in GAMBAS2. > Now I have work for 3 people all their life ! Minimum ! Than k you very > much > Reiner > > Normally it takes one person ten minutes, not three people a life time :) But, as with most things - there is a learning curve :) Happy new year Reiner, don't stress :) -- Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] fullscreen
Den 05. jan. 2015 16:41, skrev Reiner Goerlach: > Hallo Ron, > > here is the interesting response ! > > > root@reiner-laptop:/home/reiner/GAMBAS3/gambas3-3.5.4# ./reconf-all > ./reconf-all: 7: libtoolize: not found > Can't exec "libtoolize": No such file or directory at > /usr/bin/autoreconf line 189. > Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf > line 189. > autoreconf: Entering directory `.' > autoreconf: configure.ac: not using Gettext > autoreconf: running: aclocal > autoreconf: configure.ac: tracing > autoreconf: configure.ac: adding subdirectory main to autoreconf > autoreconf: Entering directory `main' > autoreconf: running: aclocal -I m4 --install > autoreconf: configure.ac: not using Libtool > autoreconf: running: /usr/bin/autoconf > configure:3860: error: possibly undefined macro: AC_LIBTOOL_DLOPEN > If this token and others are legitimate, please use m4_pattern_allow. > See the Autoconf documentation. > configure:3861: error: possibly undefined macro: AC_LIBLTDL_CONVENIENCE > configure:3862: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL > configure:3863: error: possibly undefined macro: AC_DISABLE_STATIC > autoreconf: /usr/bin/autoconf failed with exit status: 1 > root@reiner-laptop:/home/reiner/GAMBAS3/gambas3-3.5.4# ./configure > bash: ./configure: No such file or directory > root@reiner-laptop:/home/reiner/GAMBAS3/gambas3-3.5.4# > > ? > > Reiner > Have you read/seen this: http://gambaswiki.org/wiki/install ? Do also check out this section of that page: http://gambaswiki.org/wiki/install#t9 -- Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Keyboard shortcuts for translator tool
Den 30. des. 2014 15:24, skrev Benoît Minisini: > Le 30/12/2014 15:13, Jørn Erik Mørne a écrit : >> It would be super efficient to have the ability to use keyboard >> shortcuts in the translator tool. >> Having to click the toolbuttons is very time consuming. >> The shortcuts should work from the editor, so they must not interfere >> with defined shortcuts like Ctrl+C. >> >> PageUP/Down would be nice for going up/down the string list, Ctrl+Alt+C, >> or perhaps Shift+C to make a copy of the default to the current >> language, and perhaps Ctrl+D to clear and Ctrl+S to save? >> >> Kind regards! >> > Help -> Shortcuts -> Translation tab > > Maybe some shortcuts are still missing, you will tell me. > > Regards, > No, they were all there :) -- Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Keyboard shortcuts for translator tool
It would be super efficient to have the ability to use keyboard shortcuts in the translator tool. Having to click the toolbuttons is very time consuming. The shortcuts should work from the editor, so they must not interfere with defined shortcuts like Ctrl+C. PageUP/Down would be nice for going up/down the string list, Ctrl+Alt+C, or perhaps Shift+C to make a copy of the default to the current language, and perhaps Ctrl+D to clear and Ctrl+S to save? Kind regards! -- Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Possible bug on offline help
Den 28. nov. 2014 21:33, skrev Gian: > Il 28/11/2014 20:44, Gian ha scritto: >> Il 28/11/2014 20:31, Jørn Erik Mørne ha scritto: >>> Den 28. nov. 2014 15:39, skrev Gian: >>>> Hello everyone, >>>> if I use the off-line help I get everywhere this “This page does not >>>> exist” see attached. >>>> If I use the on-line help is ok. >>>> regards >>>> Gianluigi >>>> >>>> -- >>>> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >>>> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >>>> with Interactivity, Sharing, Native Excel Exports, App Integration & more >>>> Get technology previously reserved for billion-dollar corporations, FREE >>>> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk >>>> ___ >>>> Gambas-user mailing list >>>> Gambas-user@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/gambas-user >>> I believe this is the same issue I reported a while ago, and also >>> another time a while before a while ago :) I think we got stuck in >>> finding the cause of the bug both times. >>> >> Yes,may be, but now waiting with confidence :) >> >> -- >> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server >> from Actuate! Instantly Supercharge Your Business Reports and Dashboards >> with Interactivity, Sharing, Native Excel Exports, App Integration & more >> Get technology previously reserved for billion-dollar corporations, FREE >> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk >> ___ >> Gambas-user mailing list >> Gambas-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/gambas-user >> > > Sorry Jorn, > have my best regards also to you > Gianluigi Well, thank you :D -- Kind regards Jørn Erik -- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Possible bug on offline help
Den 28. nov. 2014 15:39, skrev Gian: > Hello everyone, > if I use the off-line help I get everywhere this “This page does not > exist” see attached. > If I use the on-line help is ok. > regards > Gianluigi > > -- > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server > from Actuate! Instantly Supercharge Your Business Reports and Dashboards > with Interactivity, Sharing, Native Excel Exports, App Integration & more > Get technology previously reserved for billion-dollar corporations, FREE > http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk > ___ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user I believe this is the same issue I reported a while ago, and also another time a while before a while ago :) I think we got stuck in finding the cause of the bug both times. -- Kind regards Jørn Erik -- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] ComboBox UserContol, with pictures.
Den 17. nov. 2014 21:36, skrev Charlie Reinl: > Am Sonntag, den 16.11.2014, 17:57 + schrieb Sam Dadds: >> Hi All, >> >> Need help with a custom ComboBox. >> >>I've created a UserControl (extends UserControl) with the normal stuff >> (TextBox for selection, picture for selected item and picture for dropdown >> button). >> >>The actual drop down list is a ListView instead of a ListBox for item >> pictures. >> This all works well. >> >>Problem is with positioning the drop down list. The ListView actually >> gets re-parented >> to the underlying form so it will display normally even when the ComboBox is >> inside a >> toolbar or other container. >> >>Finding the correct X and Y is a problem. Depending on how many >> containers the actual >> ComboBox is inside the X and Y become difficult to calculate. >> >>It seems the borders or margin padding of the additional containers are >> not taken into consideration when reporting the X and Y of the ComboBox >> container. >> >>Currently I've tried iterating up the containers via the parent of the >> ComboBox and >> add up the left or X properties until the actual parent form is found. This >> is close >> but not 100% accurate. By adding in the Desktop.Scale it gets a bit closer >> but still >> off. >> >>I've looked at the source for the db version of a ComboBox but the >> internal ListBox >> is actually used. >> >>Does anyone have an example of this or a better idea of how to use a >> ListView as the >> List container of the ComboBox? >> >>It's not critical but it would be nice to have item pictures in a ListBox >> or ComboBox. >> >> Thanks. > Salut Sam, > > have a look at Christof Thalhofer's "Gambas Combobox for Lists and > Databases", https://github.com/Deganius/DegComboBox , may be you find > some ideas. > Perhaps I haven't understood your issue, but why not set the ListView.Ignore = True and the parent to the current form? -- Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Snippets bug
Den 13. nov. 2014 16:34, skrev Benoît Minisini: > Le 13/11/2014 15:04, Jørn Erik Mørne a écrit : >> Den 12. nov. 2014 22:40, skrev Jørn Erik Mørne: >>> Hi! >>> >>> I have these two snippets: >>> >>> prb >>> Private $b${1:VariableName} as Boolean >>> prc >>> Private $c${1:VariableName} as Collection >>> >>> The first, prb, works as expected. But with the prb the initial c gets >>> selected in addition to VariableName. >>> >> The problem corrected itself after restarting Gambas >> > I have just tried adding your two snippets, and it worked immediately, > no strange selection behaviour... > Its probably one of those funny-bugs :) -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Snippets bug
Den 12. nov. 2014 22:40, skrev Jørn Erik Mørne: > Hi! > > I have these two snippets: > > prb > Private $b${1:VariableName} as Boolean > prc > Private $c${1:VariableName} as Collection > > The first, prb, works as expected. But with the prb the initial c gets > selected in addition to VariableName. > The problem corrected itself after restarting Gambas -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Snippets bug
Hi! I have these two snippets: prb Private $b${1:VariableName} as Boolean prc Private $c${1:VariableName} as Collection The first, prb, works as expected. But with the prb the initial c gets selected in addition to VariableName. -- Kind regards -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Drag and drop inconsistent across toolkits
Den 18. okt. 2014 15:59, skrev Ron: > I have to drag a control on my form a few time until it sticks... > Is this related? > > Ubuntu 14.04.1 This is often also my experience... -- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Drag and drop inconsistent across toolkits
Tobias Boege wrote: > Hi, > > there is a project attached which tries to implement some drag and drop. > The > archive has gb.qt4 as graphical component but let me start with its > behaviour > under gb.gui: > > - drag from SourceLabel und SourceTextBox and drop on Destination work, > - if I do three drag and drops: (i) from SourceLabel, (ii) from >SourceTextBox, (iii) from SourceLabel again, I get an error "Undergoing >drag". At step (ii) I see a warning in the console: > > (DragData:2084): GLib-GObject-WARNING **: gsignal.c:2580: instance > '0x14170a0' has no handler with id '138' > > When I change the component to gb.qt4, I get the following: > > - drag from SourceTextBox does not work automatically anymore, I have to >code it myself (losing the ability to select text in it), > - no errors or warnings. > > The project is from another Gambas user and on his system (don't know > what > it is -- does it matter?), the project with gb.gui does: > > - drag from SourceTextBox works automatically, drag from SourceLabel >doesn't work, even when coded (as in the attached project). > > Is there anything I can say to him about this? > > My system: > > [System] > Gambas=3.5.90 > OperatingSystem=Linux > Kernel=3.15.8-1-ARCH > Architecture=x86_64 > Distribution=arch > Desktop=? > Theme=QWindows > Language=en_GB.UTF-8 > Memory=3758M > [Libraries] > Cairo=libcairo.so.2.11200.16 > Curl=libcurl.so.4.3.0 > DBus=libdbus-1.so.3.7.2 > DBus=libdbus-1.so.3.8.6 > GStreamer=libgstreamer-0.10.so.0.30.0 > GStreamer=libgstreamer-1.0.so.0.400.0 > GTK+3=libgtk-3.so.0.1200.2 > GTK+=libgtk-x11-2.0.so.0.2400.13 > GTK+=libgtk-x11-2.0.so.0.2400.24 > OpenGL=libGL.so.1.2.0 > Poppler=libpoppler.so.35.0.0 > Poppler=libpoppler.so.46.0.0 > Qt4=libQtCore.so.4.8.6 > SDL=libSDL-1.2.so.0.11.4 > > which looks awful. I only know for sure that I need two different > versions > of Poppler and GStreamer to keep all my applications satisfied. But two > GTK+2 versions? :-/ > > Regards, > Tobi > > -- > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push > notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho___ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user -- I also just recently found that drag/drop with gb.gui (most likely GTK) is buggy. I have to drag/drop several times to get it to work, while under gb.qt it just works. Find my project attached. In the same project, when dropping a document on the trashcan I get an Error which I don't know is a bug a correct behaviour? It says: "Control is being draged" Kind regards Jørn Erik-- Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] AND and OR
Den 05. okt. 2014 23:19, skrev Jussi Lahtinen: > The extra "if" enables short-circuiting > <http://en.wikipedia.org/wiki/Short-circuit_evaluation> and thus it is very > useful in some cases. > > Example, you can write "if then" structures like this: > If hObject <> Null And If hObject.SomeProperty = True Then > > Without the extra "if" this would fail, if the hObject would be null. > > > > Jussi > > > On Sun, Oct 5, 2014 at 11:00 PM, Jørn Erik Mørne > wrote: > >> Den 05. okt. 2014 21:11, skrev Tobias Boege: >>> On Sun, 05 Oct 2014, J??rn Erik M??rne wrote: >>>> Why is it not allowed to use AND and OR in the same logical test? >>>> >>> It is allowed and works: >>> >>> $ gbx3 -e "(False And Not False) Or (False Or Not False)" >>> True >>> >>> Maybe you refer to the AND IF and OR IF keywords in an IF statement? >>> >>> Regards, >>> Tobi >>> >> Aha, yes you're right :) Removing an extra IF that had sneaked in was >> the solution. >> >> >> -- >> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer >> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports >> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper >> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer >> >> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk >> ___ >> Gambas-user mailing list >> Gambas-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/gambas-user >> > -- > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > ___ > Gambas-user mailing list > Gambas-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gambas-user Ahh! That's great :) Very good to know! Thanks! -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] AND and OR
Den 05. okt. 2014 21:11, skrev Tobias Boege: > On Sun, 05 Oct 2014, J??rn Erik M??rne wrote: >> Why is it not allowed to use AND and OR in the same logical test? >> > It is allowed and works: > >$ gbx3 -e "(False And Not False) Or (False Or Not False)" >True > > Maybe you refer to the AND IF and OR IF keywords in an IF statement? > > Regards, > Tobi > Aha, yes you're right :) Removing an extra IF that had sneaked in was the solution. -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] AND and OR
Why is it not allowed to use AND and OR in the same logical test? -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Strange ERROR if "Utility" in Name Menu
Den 01. okt. 2014 23:29, skrev Tobias Boege: > On Wed, 01 Oct 2014, J?rn Erik M?rne wrote: >> Den 01. okt. 2014 23:08, skrev Tobias Boege: >>> On Wed, 01 Oct 2014, Ru Vuott wrote: Hello, our friend of italian Gambas forum posted an his project, where a strange error is raised if the "Name" of Menu is "Utility"... Your opinion ? His project here attached (look at the "Name" of "Menu5" inside !) >>> This is because the menu name is "Utility" and the project options say that >>> "form controls are public". >>> >>> So what happens is: the compiler creates public variables in the form which >>> have the name of the controls in the form (I guess), so that the programmer >>> can write FMain.myMenu to access their menu control. But Utility is actually >>> a boolean property of the Form class already from which FMain inherits, so >>> the not-so-strange "incorrectly overridden" error is raised. >>> >>> Our friend did two things wrong here: normally, you shouldn't tick the "form >>> controls are public" checkbox. Indeed the program seems to not need it at >>> all. It's the same as having everything be a global variable -- it nullifies >>> the principle of encapsulation. >>> >>> The second thing is to violate the Gambas naming conventions :-) Calling a >>> thing "Utility" asks for trouble, "mnuUtility" would be fine. >>> >>> Regards, >>> Tobi >>> >> Apropos Gambas naming conventions - is it written any place? I see >> people using h, $ frequently and also i, s and b for integer, string and >> boolean.Most of these are OK, but I do not fully understand where you >> normally put the $? >> > They are here: [0]. There is a note at the end of the page which is quite > important. The Gambas IDE is the single definitive reference if you really > want to have an overview of all (or some) of the prefixes for graphical > controls. I tend to forget these prefixes regularly and use slightly > different ones (whatever sounds right). I guess nobody is expected to dive > into the IDE to look up the correct prefix for a control :-) > > [0] http://gambaswiki.org/wiki/doc/naming > Danke mein Herr :) -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Strange ERROR if "Utility" in Name Menu
Den 01. okt. 2014 23:08, skrev Tobias Boege: > On Wed, 01 Oct 2014, Ru Vuott wrote: >> Hello, >> >> our friend of italian Gambas forum posted an his project, where a strange >> error is raised if the "Name" of Menu is "Utility"... >> >> Your opinion ? >> >> His project here attached (look at the "Name" of "Menu5" inside !) >> > This is because the menu name is "Utility" and the project options say that > "form controls are public". > > So what happens is: the compiler creates public variables in the form which > have the name of the controls in the form (I guess), so that the programmer > can write FMain.myMenu to access their menu control. But Utility is actually > a boolean property of the Form class already from which FMain inherits, so > the not-so-strange "incorrectly overridden" error is raised. > > Our friend did two things wrong here: normally, you shouldn't tick the "form > controls are public" checkbox. Indeed the program seems to not need it at > all. It's the same as having everything be a global variable -- it nullifies > the principle of encapsulation. > > The second thing is to violate the Gambas naming conventions :-) Calling a > thing "Utility" asks for trouble, "mnuUtility" would be fine. > > Regards, > Tobi > Apropos Gambas naming conventions - is it written any place? I see people using h, $ frequently and also i, s and b for integer, string and boolean.Most of these are OK, but I do not fully understand where you normally put the $? -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TrayIcon error
Den 30. sep. 2014 18:07, skrev Benoît Minisini: > Le 30/09/2014 18:03, Jørn Erik Mørne a écrit : >>> Maybe I guess what you meant: trayicons do not display in the Ubuntu >>> Unity desktop? >>> >>> Ubuntu decided to drop support for tray icons because they don't care >>> anymore, this is the past, get rid of the past, break applications, >>> welcome to the new indicator protocols with all documentation links >>> poiting at error 404 pages. All other desktops keep supporting tray >>> icons, even Gnome! >>> >>> So I have no immediate solution for that. I just have to implement the >>> new protocol. But I must find where they put the documentation on the >>> internet (if they did). Otherwise I have to deep into KDE source code >>> to understand it (they implemented the protocol for KDE apps, but not >>> for Qt yet). >>> >>> Regards, >>> >> To me I always thought Ubuntu was synonymous with Unity, and other DEs >> was Kubuntu, Xubuntu, Ubuntu Gnome, ... >> > > This is maybe what they want you to think. :-) > Haha, perhaps :) -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TrayIcon error
Den 26. sep. 2014 23:57, skrev Benoît Minisini: > Le 26/09/2014 23:40, Jørn Erik Mørne a écrit : >>>> It's attached >>> I just tested this in Ubuntu 14.04 and here it runs without error, but >>> there's no icon added to the tray, and when I close the window, Gambas >>> "believes" it is still runnung, so I need to use stop... >> Any news about this? >> > Well, it works as expected in KDE4 at least. And the TrayIcons are > managed indepently, so if you close the windows, the trayicon keeps > running (it is not owned by the window). You must explicitely close (i.e > hide) the trayicon too to quit the application. > > Are you sure that you have the system tray plasma widget in your panel? > I believed I had reported back that the KDE for some reason unbeknownst to me just happened to work as expected here too. However, in Ubuntu, there's no icon in tray... This is my code: Public Sub Form_Open() TrayIcon1.Picture = Picture["icon:/16/access"] TrayIcon1.Show() End Public Sub Form_Close() TrayIcon1.Hide() End Closing now works too with the .Hide() implemented :) -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TrayIcon error
Den 14. sep. 2014 00:14, skrev Jørn Erik Mørne: > Den 13. sep. 2014 18:58, skrev Jørn Erik Mørne: >> Den 13. sep. 2014 18:52, skrev Benoît Minisini: >>> Le 13/09/2014 18:42, Jørn Erik Mørne a écrit : >>>> Den 12. sep. 2014 23:19, skrev Jørn Erik Mørne: >>>>> Hello Benoît! >>>>> >>>>> If I drop a TrayIcon on my FMain and set Visible = True, there's an >>>>> error saying: "Unable to find system tray". >>>>> >>>>> >>>>> [System] >>>>> Gambas=3.5.90 >>>>> OperatingSystem=Linux >>>>> Kernel=3.15.10-1-MANJARO >>>>> Architecture=x86_64 >>>>> Distribution=Manjaro Linux >>>>> Desktop=KDE4 >>>>> Theme=QtCurve >>>>> Language=nb_NO.UTF-8 >>>>> Memory=9902M >>>>> [Libraries] >>>>> Cairo=libcairo.so.2.11200.16 >>>>> Curl=libcurl.so.4.3.0 >>>>> DBus=libdbus-1.so.3.8.6 >>>>> GStreamer=libgstreamer-0.10.so.0.30.0 >>>>> GStreamer=libgstreamer-1.0.so.0.401.0 >>>>> GTK+3=libgtk-3.so.0.1200.2 >>>>> GTK+=libgtk-x11-2.0.so.0.2400.24 >>>>> OpenGL=libGL.so.1.2.0 >>>>> Poppler=libpoppler.so.46.0.0 >>>>> Qt4=libQtCore.so.4.8.6 >>>>> SDL=libSDL-1.2.so.0.11.4 >>>> I also tried the SystemTray example, and all I get is a window with a >>>> yellow box... nothing happens when I resize it. If I haven't done >>>> anything wrong, it seems Gambas cannot connect to my system tray? >>>> >>> Please send your project. "Unable to find system tray" means that Qt was >>> unable to find it. But it never happened here with KDE4. >>> >>> Regards, >>> >> It's attached > I just tested this in Ubuntu 14.04 and here it runs without error, but > there's no icon added to the tray, and when I close the window, Gambas > "believes" it is still runnung, so I need to use stop... Any news about this? -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Ctrl+Alt+S is not working in Ubuntu 14.04
Ctrl+Alt+S is not working in Ubuntu 14.04. It is however working just fine under Manjaro KDE... -- Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Making a simple C++ component
Hi! I had a C++ introduction course at the University, so my knowledge of the language is very basic (no play on words intended :) ). I've been looking at how to put together a simple C++ component, tried to get an understanding from the documentation and looking at some components in the svn repo. I hvave gotten to the point of making the "skeleton" from the script inside the TEMPLATES folder. Now, just to get an understanding of how it is done, how can I make a simple component that has a property, and two methods, one for setting and one for getting the property's value? Kind regards Jørn Erik -- Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Make installation package fails on Manjaro
Den 20. sep. 2014 20:26, skrev Benoît Minisini: > Le 20/09/2014 15:29, Jørn Erik Mørne a écrit : >> Hi! It is getting somewhere, but not quite there yet, it seems. I can >> now make a package, but when I try to install it (no matter which one) I >> get some error messages about the package file: >> 1. Missing meta data >> 2. Invalid or corrupt package >> >> Kind regards >> Jørn Erik >> > I will try to install it too on my ArchLinux VM. Can you tell me how you > do that? And do you have more detailed errors or just these messages? > I assume you mean how to install the generated package? Just type 'sudo pacman -U '. I am on a different PC now, so I cannot provide the exact copy from the terminal yet, but it basically just said that which I posted, that the package had missing meta data and that it was corrupt. It came out in Norwegian, so I just translated the errors. Kind regards Jørn Erik -- Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Make installation package fails on Manjaro
Den 18. sep. 2014 17:16, skrev Benoît Minisini: > Le 17/09/2014 10:12, Jørn Erik Mørne a écrit : >> Den 17. sep. 2014 03:41, skrev Benoît Minisini: >>> Le 16/09/2014 17:19, Jørn Erik Mørne a écrit : >>>> >>>> It really doesn't matter what project you use, as all of them fail the >>>> same way. I had Manjaro on two different PCs and the result was the >>>> same >>>> on both. Here is a slightly modified version of that project I used to >>>> show the error attached in the previous mail. (Perhaps you'll also see >>>> that because of the TrayIcon that is included in the project, you'll >>>> have to force quit the app to stop it. Clicking x just closes the >>>> window, but leaves Gambas still in running mode... also, in Ubuntu, >>>> the >>>> tray icon is not showing, however now it is showing in KDE >>>> Manjaro... I >>>> have no idea why it all of a sudden changed like that.) >>>> >>>> Kind regards >>>> Jørn Erik >>> >>> I know it doesn't matter, but I always need the project to reproduce >>> the same conditions as much as possible! >>> >>> Now I'm currently compiling Gambas on a ArchLinux installed (with many >>> problems) inside VirtualBox... >>> >>> But I didn't write the code that makes ArchLinux package, not being an >>> ArchLinux user, and the guy who wrote it disappeared. >>> >>> So be patient! >>> >> >> No hurry :) I am just reporting bugs I find, but I also know you are >> doing a lot, and I am in no way expecting you to fix it immediately, >> though you are often very quick :) Thanks for making Gambas Benoît, it >> is truly a very nice project. >> >> Wishing you a very good day! >> >> Kind regards >> Jørn Erik >> > > The ArchLinux packages should be fixed in revision #6487. If you can > confirm, it would be cool. > > Regards, > Hi! It is getting somewhere, but not quite there yet, it seems. I can now make a package, but when I try to install it (no matter which one) I get some error messages about the package file: 1. Missing meta data 2. Invalid or corrupt package Kind regards Jørn Erik -- Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Make installation package fails on Manjaro
>Salut Jørn Erik, Hei på deg Charlie :) >what I see is Permission denied seams to be a Permission problem. >No, these say "Permission denied" (a lot!). Something with your source tree >is not OK anymore. Did you build as root last time? The first two lines also >suggest that you moved the tree elsewhere? >Like others have already said, it seems to be permission problem. Maybe by >using sudo in wrong place..? >I suggest to delete your source folder and checkout again. Should be the >easiest way. > > >Jussi Thanks for the suggestions. This is how I've done it: For a long time I've kept a dir where I just do svn update, ./reconf-all, ./configure -C, make After that I would run a PKGBUILD script to make an arch package out of it. This work until last week. Then this started to happen. I thought I'd wait to see if it would resolve with a newer code base, but it didn't. So, yesterday I deleted the SVN dir, and did a fresh checkout, but it is still the same result... I currently have no idea what it is, but it seems strange that I have permission problems in my home dir... -- Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Make installation package fails on Manjaro
Den 18. sep. 2014 17:16, skrev Benoît Minisini: > Le 17/09/2014 10:12, Jørn Erik Mørne a écrit : >> Den 17. sep. 2014 03:41, skrev Benoît Minisini: >>> Le 16/09/2014 17:19, Jørn Erik Mørne a écrit : >>>> >>>> It really doesn't matter what project you use, as all of them fail the >>>> same way. I had Manjaro on two different PCs and the result was the >>>> same >>>> on both. Here is a slightly modified version of that project I used to >>>> show the error attached in the previous mail. (Perhaps you'll also see >>>> that because of the TrayIcon that is included in the project, you'll >>>> have to force quit the app to stop it. Clicking x just closes the >>>> window, but leaves Gambas still in running mode... also, in Ubuntu, >>>> the >>>> tray icon is not showing, however now it is showing in KDE >>>> Manjaro... I >>>> have no idea why it all of a sudden changed like that.) >>>> >>>> Kind regards >>>> Jørn Erik >>> >>> I know it doesn't matter, but I always need the project to reproduce >>> the same conditions as much as possible! >>> >>> Now I'm currently compiling Gambas on a ArchLinux installed (with many >>> problems) inside VirtualBox... >>> >>> But I didn't write the code that makes ArchLinux package, not being an >>> ArchLinux user, and the guy who wrote it disappeared. >>> >>> So be patient! >>> >> >> No hurry :) I am just reporting bugs I find, but I also know you are >> doing a lot, and I am in no way expecting you to fix it immediately, >> though you are often very quick :) Thanks for making Gambas Benoît, it >> is truly a very nice project. >> >> Wishing you a very good day! >> >> Kind regards >> Jørn Erik >> > > The ArchLinux packages should be fixed in revision #6487. If you can > confirm, it would be cool. > > Regards, > Now, I can't compile Gambas any longer. Last successful compile was about a week ago. Has there been any new dependencies added recently? Kind regards Jørn Erik checking for libintl headers... ./configure: line 17183: cd: /home/myUser/Programmering/Gambas: No such file or directory /usr/include/ checking for libintl libraries... no configure: WARNING: Unable to find file: libintl.so ./configure: line 17340: ./warnings.log: Permission denied touch: cannot touch 'DISABLED': Permission denied touch: cannot touch 'DISABLED.libintl': Permission denied configure: WARNING: This library may be located inside the system C library ./configure: line 17398: ./warnings.log: Permission denied checking for libiconv headers... /usr/include/ checking for libiconv libraries... no configure: WARNING: Unable to find file: libiconv.so ./configure: line 17675: ./warnings.log: Permission denied touch: cannot touch 'DISABLED': Permission denied touch: cannot touch 'DISABLED.libiconv': Permission denied configure: WARNING: This library may be located inside the system C library ./configure: line 17733: ./warnings.log: Permission denied checking for libffi component with pkg-config... ./configure: line 18100: confdefs.h: Permission denied OK checking for gb.inotify headers... /usr/include/ checking for gb.inotify libraries... ./configure: line 19099: confdefs.h: Permission denied ./configure: line 19146: confdefs.h: Permission denied checking for xdg-mime... xdg-mime ./configure: line 19203: confcache: Permission denied ./configure: line 19264: confcache: Permission denied configure: not updating unwritable cache ../config.cache checking that generated files are newer than configure... done configure: creating ./config.status ./configure: line 19364: ./config.status: Permission denied ./configure: line 19378: ./config.status: Permission denied ./configure: line 19748: ./config.status: Permission denied ./configure: line 19776: ./config.status: Permission denied ./configure: line 19784: ./config.status: Permission denied ./configure: line 19817: ./config.status: Permission denied ./configure: line 19836: ./config.status: Permission denied ./configure: line 19913: ./config.status: Permission denied ./configure: line 19924: ./config.status: Permission denied ./configure: line 19935: ./config.status: Permission denied ./configure: line 20320: ./config.status: Permission denied ./configure: line 20423: conf10673subs.sh: Permission denied configure: error: could not make ./config.status configure: error: ./configure failed for main -- Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Error when project's build folder has been relocated
If I move my project's build folder (where I store the install packages) to a new place (and the IDE is NOT running of course), and then open the project in the IDE and try to make a install package, I get this error (see attached screenshot). Here the path in the error is the old path I used to export to. Now I have to make that folder in order to get the make install package dialog to open. -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TrayIcon error
Den 13. sep. 2014 18:58, skrev Jørn Erik Mørne: > > Den 13. sep. 2014 18:52, skrev Benoît Minisini: >> Le 13/09/2014 18:42, Jørn Erik Mørne a écrit : >>> Den 12. sep. 2014 23:19, skrev Jørn Erik Mørne: >>>> Hello Benoît! >>>> >>>> If I drop a TrayIcon on my FMain and set Visible = True, there's an >>>> error saying: "Unable to find system tray". >>>> >>>> >>>> [System] >>>> Gambas=3.5.90 >>>> OperatingSystem=Linux >>>> Kernel=3.15.10-1-MANJARO >>>> Architecture=x86_64 >>>> Distribution=Manjaro Linux >>>> Desktop=KDE4 >>>> Theme=QtCurve >>>> Language=nb_NO.UTF-8 >>>> Memory=9902M >>>> [Libraries] >>>> Cairo=libcairo.so.2.11200.16 >>>> Curl=libcurl.so.4.3.0 >>>> DBus=libdbus-1.so.3.8.6 >>>> GStreamer=libgstreamer-0.10.so.0.30.0 >>>> GStreamer=libgstreamer-1.0.so.0.401.0 >>>> GTK+3=libgtk-3.so.0.1200.2 >>>> GTK+=libgtk-x11-2.0.so.0.2400.24 >>>> OpenGL=libGL.so.1.2.0 >>>> Poppler=libpoppler.so.46.0.0 >>>> Qt4=libQtCore.so.4.8.6 >>>> SDL=libSDL-1.2.so.0.11.4 >>> I also tried the SystemTray example, and all I get is a window with a >>> yellow box... nothing happens when I resize it. If I haven't done >>> anything wrong, it seems Gambas cannot connect to my system tray? >>> >> Please send your project. "Unable to find system tray" means that Qt was >> unable to find it. But it never happened here with KDE4. >> >> Regards, >> > It's attached I just tested this in Ubuntu 14.04 and here it runs without error, but there's no icon added to the tray, and when I close the window, Gambas "believes" it is still runnung, so I need to use stop... -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Bubbles are invisible
Den 13. sep. 2014 23:17, skrev Jørn Erik Mørne: Den 13. sep. 2014 23:07, skrev Jørn Erik Mørne: Den 13. sep. 2014 22:42, skrev Benoît Minisini: Le 13/09/2014 19:51, Jørn Erik Mørne a écrit : In Manjaro bubbles are invisible: I cannot reproduce that. Can you try to change your colour theme and/or your widget theme to see if it changes anything? Aha, I found it. I tried desktop theme and and window style, but the issue is actually with the colour theme (I was using Breeze, the KDE5 colour theme, but on KDE4). It appears that when KDE's tooltip colour is set to: #FCFCFC Bubbles turn invisible... I changed it to #FF and that works well, even #FEFEFE... strange? Its not quite right in Ubuntu 14.04 either. If you compare the two attachments you'll see how the tooltips are coloured and how the balloon is coloured - white on light yellow... -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Make installation package fails on Manjaro
Den 13. sep. 2014 23:41, skrev Benoît Minisini: > Le 13/09/2014 23:28, Jørn Erik Mørne a écrit : >> If I may add one more issue - hope I am not flooding here now, but this >> one has been around since day one. On Manjaro, making installation >> packages fail... >> >> >> >> Saving CHANGELOG file. >> >> >> >> Creating package for Archlinux. >> >> >> >> Making build directory. >> cd /tmp/gambas.1000/30587/archlinux >> makepkg -g >> PKGBUILD >> ==> Henter kilder... >> ==> FEIL: syncthinggui-0.0.4.tar.bz2 ble ikke funnet i build-mappen, og >> den er heller ikke en URL. >> Creating package... >> >> cd /tmp/gambas.1000/30587/archlinux >> makepkg --allsource >> ==> Lager pakke: syncthinggui 0.0.4-1 (lø. 13. sep. 23:23:28 +0200 2014) >> ==> Henter kilder... >> ==> FEIL: syncthinggui-0.0.4.tar.bz2 ble ikke funnet i build-mappen, og >> den er heller ikke en URL. >> cd /tmp/gambas.1000/30587/archlinux >> makepkg -d >> ==> Lager pakke: syncthinggui 0.0.4-1 (lø. 13. sep. 23:23:28 +0200 2014) >> ==> ADVARSEL: Hopper over kontroll av avhengigheter. >> ==> Henter kilder... >> ==> FEIL: syncthinggui-0.0.4.tar.bz2 ble ikke funnet i build-mappen, og >> den er heller ikke en URL. >> cd /tmp/gambas.1000/30587/archlinux >> cp syncthinggui-0.0.4-1*.tar.* >> /home/myUser/Programmering/GambasBuilds/Sycthing\ GUI/archlinux >> cp: klarte ikke å hente informasjon om «syncthinggui-0.0.4-1*.tar.*»: >> Ingen slik fil eller filkatalog >> The packages have been successfully created. >> >> > Can you translate the messages in english for me? I see that many things > failed, but I have no idea what. > Saving CHANGELOG file. Creating package for Archlinux. Making build directory. cd /tmp/gambas.1000/30587/archlinux makepkg -g >> PKGBUILD ==> Fetching sources ==> ERROR: syncthinggui-0.0.4.tar.bz2 was not found in the build-folder, and is not a URL. Creating package... cd /tmp/gambas.1000/30587/archlinux makepkg --allsource ==> Adding package: syncthinggui 0.0.4-1 (lø. 13. sep. 23:23:28 +0200 2014) ==> Fetching sources... ==> ERROR: syncthinggui-0.0.4.tar.bz2 was not found in the build-folder, and is not a URL. cd /tmp/gambas.1000/30587/archlinux makepkg -d ==> Creating package: syncthinggui 0.0.4-1 (lø. 13. sep. 23:23:28 +0200 2014) ==> WARNING: Skipping dependency control. ==> Fetching sources... ==> ERROR: syncthinggui-0.0.4.tar.bz2 was not found in the build-folder, and is not a URL. cd /tmp/gambas.1000/30587/archlinux cp syncthinggui-0.0.4-1*.tar.* /home/myUser/Programmering/GambasBuilds/Sycthing\ GUI/archlinux cp: could not retrieve information about «syncthinggui-0.0.4-1*.tar.*»: No such file or folder The packages have been successfully created. -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Make installation package fails on Manjaro
If I may add one more issue - hope I am not flooding here now, but this one has been around since day one. On Manjaro, making installation packages fail... Saving CHANGELOG file. Creating package for Archlinux. Making build directory. cd /tmp/gambas.1000/30587/archlinux makepkg -g >> PKGBUILD ==> Henter kilder... ==> FEIL: syncthinggui-0.0.4.tar.bz2 ble ikke funnet i build-mappen, og den er heller ikke en URL. Creating package... cd /tmp/gambas.1000/30587/archlinux makepkg --allsource ==> Lager pakke: syncthinggui 0.0.4-1 (lø. 13. sep. 23:23:28 +0200 2014) ==> Henter kilder... ==> FEIL: syncthinggui-0.0.4.tar.bz2 ble ikke funnet i build-mappen, og den er heller ikke en URL. cd /tmp/gambas.1000/30587/archlinux makepkg -d ==> Lager pakke: syncthinggui 0.0.4-1 (lø. 13. sep. 23:23:28 +0200 2014) ==> ADVARSEL: Hopper over kontroll av avhengigheter. ==> Henter kilder... ==> FEIL: syncthinggui-0.0.4.tar.bz2 ble ikke funnet i build-mappen, og den er heller ikke en URL. cd /tmp/gambas.1000/30587/archlinux cp syncthinggui-0.0.4-1*.tar.* /home/myUser/Programmering/GambasBuilds/Sycthing\ GUI/archlinux cp: klarte ikke å hente informasjon om «syncthinggui-0.0.4-1*.tar.*»: Ingen slik fil eller filkatalog The packages have been successfully created. -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Bubbles are invisible
Den 13. sep. 2014 23:07, skrev Jørn Erik Mørne: > Den 13. sep. 2014 22:42, skrev Benoît Minisini: >> Le 13/09/2014 19:51, Jørn Erik Mørne a écrit : >>> In Manjaro bubbles are invisible: >>> >> I cannot reproduce that. Can you try to change your colour theme >> and/or your widget theme to see if it changes anything? >> > Aha, I found it. I tried desktop theme and and window style, but the > issue is actually with the colour theme (I was using Breeze, the KDE5 > colour theme, but on KDE4). > It appears that when KDE's tooltip colour is set to: #FCFCFC Bubbles turn invisible... I changed it to #FF and that works well, even #FEFEFE... strange? -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Off-line help is not working
Den 13. sep. 2014 21:41, skrev Jørn Erik Mørne: > Den 13. sep. 2014 21:33, skrev Benoît Minisini: >> Le 13/09/2014 21:27, Jørn Erik Mørne a écrit : >>> Den 13. sep. 2014 20:54, skrev Benoît Minisini: >>>> Le 13/09/2014 20:27, Jørn Erik Mørne a écrit : >>>>> Off-line help is not working. Tested in both Manjaro and Ubuntu >>>>> 14.04 - >>>>> see attached screenshot. >>>>> >>>>> >>>> Have you downloaded it? >>>> >>> I now see (and recall) there is a "Download documentation" button that >>> is greyed out. On my Manjaro PC it says "Documentation is up to date", >>> and in Ubuntu it says "Documentation is not available"... >>> >> I forgot: The 'wget' program is used for downloading the >> documentation. Is it installed on your system? >> > yes, it is Now I got to download the documentation on Ubuntu as well (I suspect a WiFi hickup could be the issue why it wasn't available earlier on), but the problem with "This page does not exist" remains... -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Bubbles are invisible
Den 13. sep. 2014 22:42, skrev Benoît Minisini: > Le 13/09/2014 19:51, Jørn Erik Mørne a écrit : >> In Manjaro bubbles are invisible: >> > > I cannot reproduce that. Can you try to change your colour theme > and/or your widget theme to see if it changes anything? > Aha, I found it. I tried desktop theme and and window style, but the issue is actually with the colour theme (I was using Breeze, the KDE5 colour theme, but on KDE4). -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Off-line help is not working
Den 13. sep. 2014 21:33, skrev Benoît Minisini: > Le 13/09/2014 21:27, Jørn Erik Mørne a écrit : >> >> Den 13. sep. 2014 20:54, skrev Benoît Minisini: >>> Le 13/09/2014 20:27, Jørn Erik Mørne a écrit : >>>> Off-line help is not working. Tested in both Manjaro and Ubuntu >>>> 14.04 - >>>> see attached screenshot. >>>> >>>> >>> >>> Have you downloaded it? >>> >> >> I now see (and recall) there is a "Download documentation" button that >> is greyed out. On my Manjaro PC it says "Documentation is up to date", >> and in Ubuntu it says "Documentation is not available"... >> > > I forgot: The 'wget' program is used for downloading the > documentation. Is it installed on your system? > yes, it is -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Off-line help is not working
Off-line help is not working. Tested in both Manjaro and Ubuntu 14.04 - see attached screenshot. -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Bubbles are invisible
Den 13. sep. 2014 19:51, skrev Jørn Erik Mørne: > In Manjaro bubbles are invisible: > > > > > [System] > Gambas=3.5.90 > OperatingSystem=Linux > Kernel=3.15.10-1-MANJARO > Architecture=x86_64 > Distribution=Manjaro Linux > Desktop=KDE4 > Theme=QtCurve > Language=nb_NO.UTF-8 > Memory=9902M > [Libraries] > Cairo=libcairo.so.2.11200.16 > Curl=libcurl.so.4.3.0 > DBus=libdbus-1.so.3.8.6 > GStreamer=libgstreamer-0.10.so.0.30.0 > GStreamer=libgstreamer-1.0.so.0.401.0 > GTK+3=libgtk-3.so.0.1200.2 > GTK+=libgtk-x11-2.0.so.0.2400.24 > OpenGL=libGL.so.1.2.0 > Poppler=libpoppler.so.46.0.0 > Qt4=libQtCore.so.4.8.6 > SDL=libSDL-1.2.so.0.11.4 Sorry, I meant "Ballons" :) -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Bubbles are invisible
In Manjaro bubbles are invisible: [System] Gambas=3.5.90 OperatingSystem=Linux Kernel=3.15.10-1-MANJARO Architecture=x86_64 Distribution=Manjaro Linux Desktop=KDE4 Theme=QtCurve Language=nb_NO.UTF-8 Memory=9902M [Libraries] Cairo=libcairo.so.2.11200.16 Curl=libcurl.so.4.3.0 DBus=libdbus-1.so.3.8.6 GStreamer=libgstreamer-0.10.so.0.30.0 GStreamer=libgstreamer-1.0.so.0.401.0 GTK+3=libgtk-3.so.0.1200.2 GTK+=libgtk-x11-2.0.so.0.2400.24 OpenGL=libGL.so.1.2.0 Poppler=libpoppler.so.46.0.0 Qt4=libQtCore.so.4.8.6 SDL=libSDL-1.2.so.0.11.4 -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TrayIcon error
Den 13. sep. 2014 18:52, skrev Benoît Minisini: Le 13/09/2014 18:42, Jørn Erik Mørne a écrit : Den 12. sep. 2014 23:19, skrev Jørn Erik Mørne: Hello Benoît! If I drop a TrayIcon on my FMain and set Visible = True, there's an error saying: "Unable to find system tray". [System] Gambas=3.5.90 OperatingSystem=Linux Kernel=3.15.10-1-MANJARO Architecture=x86_64 Distribution=Manjaro Linux Desktop=KDE4 Theme=QtCurve Language=nb_NO.UTF-8 Memory=9902M [Libraries] Cairo=libcairo.so.2.11200.16 Curl=libcurl.so.4.3.0 DBus=libdbus-1.so.3.8.6 GStreamer=libgstreamer-0.10.so.0.30.0 GStreamer=libgstreamer-1.0.so.0.401.0 GTK+3=libgtk-3.so.0.1200.2 GTK+=libgtk-x11-2.0.so.0.2400.24 OpenGL=libGL.so.1.2.0 Poppler=libpoppler.so.46.0.0 Qt4=libQtCore.so.4.8.6 SDL=libSDL-1.2.so.0.11.4 I also tried the SystemTray example, and all I get is a window with a yellow box... nothing happens when I resize it. If I haven't done anything wrong, it seems Gambas cannot connect to my system tray? Please send your project. "Unable to find system tray" means that Qt was unable to find it. But it never happened here with KDE4. Regards, It's attached TrayIcon-0.0.1.tar.gz Description: application/gzip -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TrayIcon error
Den 12. sep. 2014 23:19, skrev Jørn Erik Mørne: > Hello Benoît! > > If I drop a TrayIcon on my FMain and set Visible = True, there's an > error saying: "Unable to find system tray". > > > [System] > Gambas=3.5.90 > OperatingSystem=Linux > Kernel=3.15.10-1-MANJARO > Architecture=x86_64 > Distribution=Manjaro Linux > Desktop=KDE4 > Theme=QtCurve > Language=nb_NO.UTF-8 > Memory=9902M > [Libraries] > Cairo=libcairo.so.2.11200.16 > Curl=libcurl.so.4.3.0 > DBus=libdbus-1.so.3.8.6 > GStreamer=libgstreamer-0.10.so.0.30.0 > GStreamer=libgstreamer-1.0.so.0.401.0 > GTK+3=libgtk-3.so.0.1200.2 > GTK+=libgtk-x11-2.0.so.0.2400.24 > OpenGL=libGL.so.1.2.0 > Poppler=libpoppler.so.46.0.0 > Qt4=libQtCore.so.4.8.6 > SDL=libSDL-1.2.so.0.11.4 I also tried the SystemTray example, and all I get is a window with a yellow box... nothing happens when I resize it. If I haven't done anything wrong, it seems Gambas cannot connect to my system tray? -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] TrayIcon error
Hello Benoît! If I drop a TrayIcon on my FMain and set Visible = True, there's an error saying: "Unable to find system tray". [System] Gambas=3.5.90 OperatingSystem=Linux Kernel=3.15.10-1-MANJARO Architecture=x86_64 Distribution=Manjaro Linux Desktop=KDE4 Theme=QtCurve Language=nb_NO.UTF-8 Memory=9902M [Libraries] Cairo=libcairo.so.2.11200.16 Curl=libcurl.so.4.3.0 DBus=libdbus-1.so.3.8.6 GStreamer=libgstreamer-0.10.so.0.30.0 GStreamer=libgstreamer-1.0.so.0.401.0 GTK+3=libgtk-3.so.0.1200.2 GTK+=libgtk-x11-2.0.so.0.2400.24 OpenGL=libGL.so.1.2.0 Poppler=libpoppler.so.46.0.0 Qt4=libQtCore.so.4.8.6 SDL=libSDL-1.2.so.0.11.4 -- Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] Fwd: WebFrame gives Sigbart 6
Super! Den 22. aug. 2014 00:53, skrev Benoît Minisini: > Le 20/08/2014 23:19, Jørn Erik Mørne a écrit : >> Hi Benoît. I sent this last week - did you manage to have a look at it? >> >> Attached project fails with Sigbart 6 when clicking 'Find Images' more >> than once. (Clicking it once and then closing the app gives a Sigbart 11 >> instead...) >> >> > The bug has been fixed in revision #6419. > > Regards, > -- Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Fwd: WebFrame gives Sigbart 6
Hi Benoît. I sent this last week - did you manage to have a look at it? Attached project fails with Sigbart 6 when clicking 'Find Images' more than once. (Clicking it once and then closing the app gives a Sigbart 11 instead...) *** Error in `WebFrame': double free or corruption (out): 0x01879910 *** === Backtrace: = /usr/lib/libc.so.6(+0x73f8e)[0x7fc49c2e5f8e] /usr/lib/libc.so.6(+0x7988e)[0x7fc49c2eb88e] /usr/lib/libc.so.6(+0x7a04b)[0x7fc49c2ec04b] /usr/lib/libQtWebKit.so.4(_ZN11QWebElementD1Ev+0xc)[0x7fc492376d6c] /usr/lib64/gambas3/gb.qt4.webkit.so(+0xce6a)[0x7fc49458ee6a] WebFrame[0x40b31e] WebFrame[0x40ba27] WebFrame[0x40bd1d] WebFrame[0x40f5a3] WebFrame[0x42ba05] WebFrame[0x42c6b0] WebFrame[0x40b31e] WebFrame[0x40ba27] WebFrame[0x40bf47] WebFrame[0x40f5a3] WebFrame[0x407dc4] WebFrame[0x437513] WebFrame[0x40a460] WebFrame[0x40ab39] WebFrame[0x41f905] WebFrame[0x42148c] /usr/lib64/gambas3/gb.qt4.so(+0x4b607)[0x7fc49aae0607] /usr/lib/libQtCore.so.4(_ZN11QMetaObject8activateEP7QObjectPKS_iPPv+0x2da)[0x7fc498da530a] /usr/lib/libQtGui.so.4(_ZN15QAbstractButton7clickedEb+0x32)[0x7fc4999096c2] /usr/lib/libQtGui.so.4(+0x575be3)[0x7fc49966dbe3] /usr/lib/libQtGui.so.4(+0x576d53)[0x7fc49966ed53] /usr/lib/libQtGui.so.4(_ZN15QAbstractButton17mouseReleaseEventEP11QMouseEvent+0x6c)[0x7fc49966ee3c] /usr/lib/libQtGui.so.4(_ZN7QWidget5eventEP6QEvent+0xaca)[0x7fc49930f44a] /usr/lib/libQtGui.so.4(_ZN19QApplicationPrivate13notify_helperEP7QObjectP6QEvent+0x8c)[0x7fc4992bff0c] /usr/lib/libQtGui.so.4(_ZN12QApplication6notifyEP7QObjectP6QEvent+0x36a)[0x7fc4992c65ca] /usr/lib/libQtCore.so.4(_ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent+0x6d)[0x7fc498d9158d] /usr/lib/libQtGui.so.4(_ZN19QApplicationPrivate14sendMouseEventEP7QWidgetP11QMouseEventS1_S1_PS1_R8QPointerIS0_Eb+0x153)[0x7fc4992c5dc3] /usr/lib/libQtGui.so.4(+0x23f95b)[0x7fc49933795b] /usr/lib/libQtGui.so.4(_ZN12QApplication15x11ProcessEventEP7_XEvent+0x5fc)[0x7fc4993363cc] /usr/lib/libQtGui.so.4(+0x265870)[0x7fc49935d870] /usr/lib/libQtCore.so.4(_ZN10QEventLoop13processEventsE6QFlagsINS_17ProcessEventsFlagEE+0x2f)[0x7fc498d9015f] /usr/lib/libQtCore.so.4(_ZN10QEventLoop4execE6QFlagsINS_17ProcessEventsFlagEE+0x175)[0x7fc498d90455] /usr/lib/libQtCore.so.4(_ZN16QCoreApplication4execEv+0x89)[0x7fc498d95719] /usr/lib64/gambas3/gb.qt4.so(+0x3df3d)[0x7fc49aad2f3d] WebFrame[0x4047e9] /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7fc49c292000] WebFrame[0x4048f0] === Memory map: 0040-00451000 r-xp 08:02 920936 /usr/bin/gbx3 00651000-0065b000 rw-p 00051000 08:02 920936 /usr/bin/gbx3 0065b000-0065e000 rw-p 00:00 0 00d19000-01cc2000 rw-p 00:00 0 [heap] 7fc41800-7fc418021000 rw-p 00:00 0 7fc418021000-7fc41c00 ---p 00:00 0 7fc41e63b000-7fc41eb03000 rw-p 00:00 0 7fc41ebd1000-7fc41eeca000 rw-p 00:00 0 7fc41eeca000-7fc41ef08000 rw-p 00:00 0 7fc41ef08000-7fc41f01 rw-p 00:00 0 7fc41f01-7fc41f08c000 rw-p 00:00 0 7fc41f08c000-7fc41f18c000 rw-p 00:00 0 7fc41f18c000-7fc41f208000 rw-p 00:00 0 7fc41f208000-7fc41f21 rw-p 00:00 0 7fc41f21-7fc41f24e000 rw-p 00:00 0 7fc41f24e000-7fc41f44e000 rw-p 00:00 0 7fc41f44e000-7fc41f48c000 rw-p 00:00 0 7fc41f48c000-7fc41f78c000 rw-p 00:00 0 7fc41f78c000-7fc41f7e9000 rw-p 00:00 0 7fc41f7e9000-7fc41f8f1000 rw-p 00:00 0 7fc41f8f1000-7fc41f9e9000 rw-p 00:00 0 7fc41f9e9000-7fc41fae9000 rw-p 00:00 0 7fc41fae9000-7fc41fb08000 rw-p 00:00 0 7fc41fb08000-7fc41fc08000 rw-p 00:00 0 7fc41fc08000-7fc41fc27000 rw-p 00:00 0 7fc41fc27000-7fc41fd27000 rw-p 00:00 0 7fc41fd27000-7fc41fda3000 rw-p 00:00 0 7fc41fda3000-7fc41fea3000 rw-p 00:00 0 7fc41fea3000-7fc41ff0 rw-p 00:00 0 7fc41ff0-7fc42000 rw-p 00:00 0 7fc42000-7fc420021000 rw-p 00:00 0 7fc420021000-7fc42400 ---p 00:00 0 7fc42400-7fc424021000 rw-p 00:00 0 7fc424021000-7fc42800 ---p 00:00 0 7fc42800-7fc428021000 rw-p 00:00 0 7fc428021000-7fc42c00 ---p 00:00 0 7fc42c00-7fc42c021000 rw-p 00:00 0 7fc42c021000-7fc43000 ---p 00:00 0 7fc430004000-7fc43009f000 rw-p 00:00 0 7fc43009f000-7fc4300a7000 rw-p 00:00 0 7fc4300a7000-7fc4300c6000 rw-p 00:00 0 7fc4300c6000-7fc4301c6000 rw-p 00:00 0 7fc4301c6000-7fc43028 rw-p 00:00 0 7fc43028-7fc43038 rw-p 00:00 0 7fc43038-7fc43039f000 rw-p 00:00 0 7fc43039f000-7fc43049f000 rw-p 00:00 0 7fc43049f000-7fc4304fc000 rw-p 00:00 0 7fc4304fc000-7fc4305fc000 rw-p 00:00 0 7fc4305fc000-7fc430697000 rw-p 00:00 0 7fc430697000-7fc430797000 rw-p 00:00 0 7fc430797000-7fc4308cd000 rw-p 00:00 0 7fc430961000-7fc43099f000 rw-p 00:0
Re: [Gambas-user] Discourse?
Haha, guys! :D I never knew your emotinal attachment to the mailing list system went so deep :) I shall not make such a foolish suggestion again! I will try to read on in KMail then, if you mean its better :) Enjoy the day! -- Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Discourse?
Hello guys! I'm not writing too often here, but I read most of what's going on through Nabble, and enjoy learning from the questions asked and the answers given. I am not sure about you, but to me the mailing list system seems a bit too ... what word to put? It just feels a bit like using your fist to get the nail in, when there's a hammer... I came across an open source rails mailinglist/board type of solution that looks really nice, and it could work really well for the Gambas mailing list.: http://www.discourse.org/ You can see it in action over at https://discourse.syncthing.net/ where I initially discovered it :) Just a suggestion! -- Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TreeView: Change parent key
I've got the newest Gambas development version now and can confirm that the .Reparent() works beautifully! Thanks a lot! -- Message: 2 Date: Sat, 26 Apr 2014 16:32:37 +0200 From: Beno?t Minisini Subject: Re: [Gambas-user] TreeView: Change parent key To: mailing list for gambas users Message-ID: <535bc385.3020...@users.sourceforge.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Le 23/04/2014 23:13, J?rn Erik M?rne a ?crit : > Hi! > > Is there a way with the TreeView component to change an item's parent key? > > Now, I have to clear out all elements, and reload them each time I > want to move an item to another parent, and this also resets the > current opened/closed status of each item, which clutters the users's > experience a bit. > > Perhaps there's a good way I haven't thought of? > > Regards, > Erik > I added a Reparent() method to the TreeView items in revision #6250. Tell me if it works for you. I now leave and will come back from holidays next week, so I won't be able to answer before. Regards, -- Beno?t Minisini -- -- "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
Re: [Gambas-user] TreeView: Change parent key
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Thanks! I am running Gambas 3.5.2 now, but perhaps I'll be able to pull the development version and try it out. Another feature request that I think would have been extremely great would be something like a .RichTextInsert() method for the TextEdit control. This way it would be very easy to insert HTML objects like tables, hyperlinks and so on at the cursor's current position. I may ask to much here now, but you don't get without asking :) I know that the QT TextEdit has methods for handling tables. Getting some basic table functionality like that in Gambas' TextEdit would be awesome, e.g. inserting/deleting tables, rows and columns, split and merging cells. I believe this is already built into QT, no? Best Regards Erik Den 27. april 2014 09:13, skrev gambas-user-requ...@lists.sourceforge.net: > Message: 2 Date: Sat, 26 Apr 2014 16:32:37 +0200 From: Beno?t > Minisini Subject: Re: [Gambas-user] > TreeView: Change parent key To: mailing list for gambas users > Message-ID: > <535bc385.3020...@users.sourceforge.net> Content-Type: text/plain; > charset=ISO-8859-1; format=flowed Le 23/04/2014 23:13, J?rn Erik > M?rne a ?crit : >>> Hi! >>> >>> Is there a way with the TreeView component to change an item's >>> parent key? >>> >>> Now, I have to clear out all elements, and reload them each >>> time I want to move an item to another parent, and this also >>> resets the current opened/closed status of each item, which >>> clutters the users's experience a bit. >>> >>> Perhaps there's a good way I haven't thought of? >>> >>> Regards, Erik >>> > I added a Reparent() method to the TreeView items in revision > #6250. > > Tell me if it works for you. > > I now leave and will come back from holidays next week, so I won't > be able to answer before. > > Regards, > > -- Beno?t Minisini -BEGIN PGP SIGNATURE- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJTXRh/AAoJEADmWD07BL0OhIcIAMNur2VrX1KkkcbavF2GHvS0 Q2O8ZqClkRPbSSLrTQEEg6+EHjrKvNDvdDucsWLQRr4E516pgy/aE5uYGBCVEOcE y/tBHn464+IZgB/KJ1CmnMJYw767v5VlGsvBSyodIgjcKBeUYSTw7agWK3WMQPb2 iEFzD4qOWkV/IGjdXx6GtAugpVuF7bbp5kFaSCiPJK0ldII0CRrk6kD8bSx4JH2P WLK0SHYLbfhiwbnNpmPONTZNTXWlflr2n6ixyEHNWPJwKiVDidO+A4Xjw/DdkaHa WtyVm31AdAgL+aUUwGUPrNx0F6OplsEFX/jGbIvia57a7JY6oHD9dmtXsfbuE5M= =/vnQ -END PGP SIGNATURE- -- Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] Possible bug with the QT4 TextBox component
Hi! I do believe the following is a bug: If you enable the QT4 components in Gambas, drop a TextBox and then run the project. Enter some words in the TextBox and set the marker at the very beginning. If you now hit CTRL+Backspace it will act as if the Delete button was clicked, that is; it will erase characters on its right... I frequently use the CTRL+Backspace/Delete to quickly remove whole words, but it seems if I am to eager in the programs I currently make with Gambas I take out too much :) I tested this with other QT/GTK applications not made in Gambas and they do not behave in the same way. Wishing you all a good day! -- Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user
[Gambas-user] TreeView: Change parent key
Hi! Is there a way with the TreeView component to change an item's parent key? Now, I have to clear out all elements, and reload them each time I want to move an item to another parent, and this also resets the current opened/closed status of each item, which clutters the users's experience a bit. Perhaps there's a good way I haven't thought of? Regards, Erik -- Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform ___ Gambas-user mailing list Gambas-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gambas-user