Re: gEDA-user: installation problem
yes debian testing, works now, thanks! will On 3/22/08, Peter Clifton <[EMAIL PROTECTED]> wrote: > > On Fri, 2008-03-21 at 13:47 +0100, Willem Granjé wrote: > > Hello, > > > > I upgraded geda to 1.4, > > > > starting gschem revealed that the component-library could not be found > > anymore... > > > > where is it, how do I configure gschem to find it? > > > Let me guess.. Debian testing? > > Last I checked, not all of gEDA 1.4.0 had migeated to testing. There is > an incompatibility between gEDA symbols 1.4.0 (in testing) and the old > version of libgeda + gschem (not yet in testing). > > > You could either fetch all the 1.4.0 packages from Unstable (sid), or > move the component library config file from its new (1.4.0) location > back to its old (pre 1.4.0): > > mv /usr/share/gEDA/gafrc.d/geda-clib.scm /usr/share/gEDA/scheme/ > > You may need to revert this once the rest of gEDA is installed. > > > Alternatively, if I guessed wrong, and you do have gschem and libgeda > 1.4.0 fully installed (you should be able to see the version strings > when starting up gschem from a command line), then perhaps you haven't > got geda-symbols 1.4.0 properly installed. > > Best wishes, > > -- > Peter Clifton > > Electrical Engineering Division, > Engineering Department, > University of Cambridge, > 9, JJ Thomson Avenue, > Cambridge > CB3 0FA > > Tel: +44 (0)7729 980173 - (No signal in the lab!) > > > > ___ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: installation problem
On Fri, 2008-03-21 at 13:47 +0100, Willem Granjé wrote: > Hello, > > I upgraded geda to 1.4, > > starting gschem revealed that the component-library could not be found > anymore... > > where is it, how do I configure gschem to find it? Let me guess.. Debian testing? Last I checked, not all of gEDA 1.4.0 had migeated to testing. There is an incompatibility between gEDA symbols 1.4.0 (in testing) and the old version of libgeda + gschem (not yet in testing). You could either fetch all the 1.4.0 packages from Unstable (sid), or move the component library config file from its new (1.4.0) location back to its old (pre 1.4.0): mv /usr/share/gEDA/gafrc.d/geda-clib.scm /usr/share/gEDA/scheme/ You may need to revert this once the rest of gEDA is installed. Alternatively, if I guessed wrong, and you do have gschem and libgeda 1.4.0 fully installed (you should be able to see the version strings when starting up gschem from a command line), then perhaps you haven't got geda-symbols 1.4.0 properly installed. Best wishes, -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
gEDA-user: installation problem
Hello, I upgraded geda to 1.4, starting gschem revealed that the component-library could not be found anymore... where is it, how do I configure gschem to find it? Thanks, Will ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk]
My system as a root password set (it's simple stefano :-) ). I'm sure I type it correctly when the installer asks me and I've tried executing that from user stefano. Strange is that I have Gd lybraries required from installer in my system. I'm sure about it because of the result of rpm -qa | grep gd that is: gdbm-devel-1.8.3-241 libgdiplus-1.1.13.5-7 gdm-2.8.0.7-57.11 klogd-1.4.1-557 gd-2.0.32-23 gdk-pixbuf-0.22.0-93 libgda-1.3.91-32 gdbm-1.8.3-241 gdb-6.4-19 libgda-devel-1.3.91-32 ifplugd-0.28-17 Stefano > Ok, the problem is that the root login session is apparently logged in > before the system would normally ask for a password. Then, my > installer times out waiting for the password prompt. > > Therefore, my next question: Does your system have a root password? > Or do you just hit return as the root password? > > The installer need to see a request for the root password before > proceeding to install the system dependencies. I can think of two > ways it wouldn't get it: 1. You are already logged in as root. > 2. Your system has no root password. > > If your system has no root password, please configure it to have one. > > Stuart > > > > On Thu, 3 Aug 2006, [EMAIL PROTECTED] wrote: > >> I'm really sorry Stuart, I've tried /media/CDROM/installer --log for >> both >> ISO I've downloaded with user stefano (not administrator) but the >> behaviour of the installer is the same, it recognize the need of Gd or >> wxGtk respectivly in the first or the second ISO and after I've inserted >> my password (correctly ... :-) ) it stops the same way. >> >> Thanks a lot >> >> Stefano C. >> >> >> ___ >> geda-user mailing list >> geda-user@moria.seul.org >> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >> > > > ___ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk]
Ok, the problem is that the root login session is apparently logged in before the system would normally ask for a password. Then, my installer times out waiting for the password prompt. Therefore, my next question: Does your system have a root password? Or do you just hit return as the root password? The installer need to see a request for the root password before proceeding to install the system dependencies. I can think of two ways it wouldn't get it: 1. You are already logged in as root. 2. Your system has no root password. If your system has no root password, please configure it to have one. Stuart On Thu, 3 Aug 2006, [EMAIL PROTECTED] wrote: I'm really sorry Stuart, I've tried /media/CDROM/installer --log for both ISO I've downloaded with user stefano (not administrator) but the behaviour of the installer is the same, it recognize the need of Gd or wxGtk respectivly in the first or the second ISO and after I've inserted my password (correctly ... :-) ) it stops the same way. Thanks a lot Stefano C. ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk]
I'm really sorry Stuart, I've tried /media/CDROM/installer --log for both ISO I've downloaded with user stefano (not administrator) but the behaviour of the installer is the same, it recognize the need of Gd or wxGtk respectivly in the first or the second ISO and after I've inserted my password (correctly ... :-) ) it stops the same way. Thanks a lot Stefano C. ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk]
Stefano, It looks to me like you are running as "root" when you start the installer. Please don't do this, the installer doesn't expect that you are root, and will get confused. Please log in as a normal user and then try the installer again. Please let me know if this solves your problem. Cheers, Stuart On Thu, 3 Aug 2006, [EMAIL PROTECTED] wrote: Thanks a lot for support! I've tried with the new ISO at http://www.brorson.com/gEDA and the problem with gtk is solved! Anyway I've the same problem with gd. It starts installing gd but after a while it stops. The installer says I need gd, but afetr trying to install I receive the following in Install.log: ... Preparing to install gd libraries. . . . Now start process of building and installing gd. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... If I try: rpm -qa | grep gd I receive: gdbm-devel-1.8.3-241 libgdiplus-1.1.13.5-7 gdm-2.8.0.7-57.11 klogd-1.4.1-557 gd-2.0.32-23 gdk-pixbuf-0.22.0-93 libgda-1.3.91-32 gdbm-1.8.3-241 gdb-6.4-19 libgda-devel-1.3.91-32 ifplugd-0.28-17 Is there another ISO :-) Stefano C. Please don't use the installer on the main gEDA download page. It is old, and needs replacement. Please use the install CD available from my website here: http://www.brorson.com/gEDA/ Stuart ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk]
1. Please tell me: -- Your Linux distro (maker and version) -- Something about your compuer (i.e. how old, how fast) -- Your installer CD version (part of file name, like 2006) If you already supplied me this info, please forgive my bad memory and supply it again. 2. Please take the Install.log file, gzip it up, and e-mail it to me at: sdb (AT) cloud9 (DOT) net. Stuart On Thu, 3 Aug 2006, [EMAIL PROTECTED] wrote: Thanks a lot for support! I've tried with the new ISO at http://www.brorson.com/gEDA and the problem with gtk is solved! Anyway I've the same problem with gd. It starts installing gd but after a while it stops. The installer says I need gd, but afetr trying to install I receive the following in Install.log: ... Preparing to install gd libraries. . . . Now start process of building and installing gd. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... If I try: rpm -qa | grep gd I receive: gdbm-devel-1.8.3-241 libgdiplus-1.1.13.5-7 gdm-2.8.0.7-57.11 klogd-1.4.1-557 gd-2.0.32-23 gdk-pixbuf-0.22.0-93 libgda-1.3.91-32 gdbm-1.8.3-241 gdb-6.4-19 libgda-devel-1.3.91-32 ifplugd-0.28-17 Is there another ISO :-) Stefano C. Please don't use the installer on the main gEDA download page. It is old, and needs replacement. Please use the install CD available from my website here: http://www.brorson.com/gEDA/ Stuart ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
gEDA-user: Installation problem wxGtk]
Thanks a lot for support! I've tried with the new ISO at http://www.brorson.com/gEDA and the problem with gtk is solved! Anyway I've the same problem with gd. It starts installing gd but after a while it stops. The installer says I need gd, but afetr trying to install I receive the following in Install.log: ... Preparing to install gd libraries. . . . Now start process of building and installing gd. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... If I try: rpm -qa | grep gd I receive: gdbm-devel-1.8.3-241 libgdiplus-1.1.13.5-7 gdm-2.8.0.7-57.11 klogd-1.4.1-557 gd-2.0.32-23 gdk-pixbuf-0.22.0-93 libgda-1.3.91-32 gdbm-1.8.3-241 gdb-6.4-19 libgda-devel-1.3.91-32 ifplugd-0.28-17 Is there another ISO :-) Stefano C. > Please don't use the installer on the main gEDA download page. It is > old, and needs replacement. Please use the install CD available from > my website here: > > http://www.brorson.com/gEDA/ > > Stuart ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk
Thanks a lot! I've tried with the new ISO and the problem with gtk is solved! Anyway I've the same problem with gd. The installer says I need that but afetr trying to install I receive the following in Install.log: ... Preparing to install gd libraries. . . . Now start process of building and installing gd. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... If I try: rpm -qa | grep gd I receive: gdbm-devel-1.8.3-241 libgdiplus-1.1.13.5-7 gdm-2.8.0.7-57.11 klogd-1.4.1-557 gd-2.0.32-23 gdk-pixbuf-0.22.0-93 libgda-1.3.91-32 gdbm-1.8.3-241 gdb-6.4-19 libgda-devel-1.3.91-32 ifplugd-0.28-17 Is there another ISO :-) Stefano C. > Please don't use the installer on the main gEDA download page. It is > old, and needs replacement. Please use the install CD available from > my website here: > > http://www.brorson.com/gEDA/ > > Stuart ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk
On Wed, 2 Aug 2006 10:10:08 -0400, "Patrick Doyle" <[EMAIL PROTECTED]> said: > On 8/2/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > Hi everyone! > > I've downloaded the ISO from gEDA official site and started installer > > --log from CD-ROM but it says I need wxGtk. > > I've tried > > rpm -qa | grep wx > > and I can see that wxGTK 2.6 is present on my SuSE 10.1. > > If I try to install wxGtk as installation process says it stops and I > > cannot understand wyh. > > The log file fiures out as the following: > > > > ... > > > > Preparing to install wxGTK. . . . > > > > Now start process of building and installing guile-gtk. > > > > I need root in order to execute this command. > > > > > > --- Starting expect session --- > > Sending su > > Timeout waiting for password prompt > > Spew received up to now: ciccio:/media/CDROM # > > > > ... > > > > Can someone help me? > Stuart is the best person to help you. (He's the one who created the > .iso), but, in the mean time, I can tell you what I found... > > I found that the installer looks for wx-config (or something like > that) and that wx-config is not installed as part of any of the RPM's > available for FC5. I too tried installing wxGTK from RPM and found > that I still couldn't install. So I uninstalled the RPM and just let > the installer install it's own version of wxGTK, and that worked. I'm not familiar with these rmp based distributions but in my opinion you need to install wxGTK-devel package to have wx-config. -- watashi |v|[EMAIL PROTECTED] Cyril Hrubis [EMAIL PROTECTED] -- http://www.fastmail.fm - IMAP accessible web-mail ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk
Please don't use the installer on the main gEDA download page. It is old, and needs replacement. Please use the install CD available from my website here: http://www.brorson.com/gEDA/ Stuart On Wed, 2 Aug 2006, [EMAIL PROTECTED] wrote: Hi everyone! I've downloaded the ISO from gEDA official site and started installer --log from CD-ROM but it says I need wxGtk. I've tried rpm -qa | grep wx and I can see that wxGTK 2.6 is present on my SuSE 10.1. If I try to install wxGtk as installation process says it stops and I cannot understand wyh. The log file fiures out as the following: ... Preparing to install wxGTK. . . . Now start process of building and installing guile-gtk. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... Can someone help me? Thanks a lot in advance! Stefano C. ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem wxGtk
On 8/2/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: Hi everyone! I've downloaded the ISO from gEDA official site and started installer --log from CD-ROM but it says I need wxGtk. I've tried rpm -qa | grep wx and I can see that wxGTK 2.6 is present on my SuSE 10.1. If I try to install wxGtk as installation process says it stops and I cannot understand wyh. The log file fiures out as the following: ... Preparing to install wxGTK. . . . Now start process of building and installing guile-gtk. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... Can someone help me? Stuart is the best person to help you. (He's the one who created the .iso), but, in the mean time, I can tell you what I found... I found that the installer looks for wx-config (or something like that) and that wx-config is not installed as part of any of the RPM's available for FC5. I too tried installing wxGTK from RPM and found that I still couldn't install. So I uninstalled the RPM and just let the installer install it's own version of wxGTK, and that worked. --wpd ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
gEDA-user: Installation problem wxGtk
Hi everyone! I've downloaded the ISO from gEDA official site and started installer --log from CD-ROM but it says I need wxGtk. I've tried rpm -qa | grep wx and I can see that wxGTK 2.6 is present on my SuSE 10.1. If I try to install wxGtk as installation process says it stops and I cannot understand wyh. The log file fiures out as the following: ... Preparing to install wxGTK. . . . Now start process of building and installing guile-gtk. I need root in order to execute this command. --- Starting expect session --- Sending su Timeout waiting for password prompt Spew received up to now: ciccio:/media/CDROM # ... Can someone help me? Thanks a lot in advance! Stefano C. ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation problem
[snip] >Ran into these errors on the installation. Can someone tell me what the >problem is? This is on Suse 10.1 32-bit. > [snip] >make[3]: *** [o_picture.lo] Error 1 >make[3]: Leaving directory >`/home/afore/geda-sources/gedagaf/libgeda-20060123/src' >`/home/afore/geda-sources/gedagaf/libgeda-20060123/src' >make[2]: *** [install] Error 2 >make[2]: Leaving directory >`/home/afore/geda-sources/gedagaf/libgeda-20060123/src' >make[1]: *** [install-recursive] Error 1 >make[1]: Leaving directory >`/home/afore/geda-sources/gedagaf/libgeda-20060123' >make: *** [libgeda_install] Error 2 Unfortunately, I don't see why the compiler is failing here (no failure details in the above output). The first thing to do, if you haven't done so already is to make sure you have all the packages listed at: http://geda.seul.org/wiki/geda:suse_10.0 installed. Another possibility is to download gEDA/gaf directly from: http://geda.seul.org/devel/20060123/ and follow the build instructions given in either: http://geda.seul.org/devel/20060123/README or http://geda.seul.org/devel/20060123/gaf-20060123-relnotes.html -Ales ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Re: gEDA-user: Installation Problem
On Thursday 20 July 2006 02:13, Art Fore wrote: > Still having problem with gEDA installation on Suse 10.1. I get the > following. Noting shows up under libtermcap in yast, libreadline-java > exists though. Any suggestions on what the problem is? I am not that > knowledgeable on these things. > > Art > > > /home/afore/geda-sources/gnucap/gnucap-2006-01-17 > ./configure --prefix=/home/afore/geda-install > Configuring gnucap using --prefix=/home/afore/geda-install > usr/lib/gcc/i586-suse-linux/4.1.0/../../../../i586-suse-linux/bin/ld: cannot > find -ltermcap > collect2: ld returned 1 exit status > either libtermcap or libreadline is missing - not using readline The configure script did not find the library, so it disabled the features that require it. It will compile ok, but missing some features. The missing feature is command line editing. === g++ -DHAS_READLINE -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../globals.cc ../e_card.h: In function 'CARD_LIST::fat_iterator findbranch(CS&, CARD_LIST*)': ../e_card.h:152: error: cannot convert 'CARD_LIST::fat_iterator' to 'CARD_LIST*' for argument '2' to 'CARD_LIST::fat_iterator findbranch(CS&, CARD_LIST*)' ../e_compon.h: In member function 'void COMPONENT::attach_common(COMMON_COMPONENT*)': ../e_compon.h:139: error: '::attach_common' has not been declared ../e_compon.h: In member function 'void COMPONENT::detach_common()': ../e_compon.h:140: error: '::detach_common' has not been declared make[2]: *** [globals.o] Error 1 = (I replaced the one you sent with one that doesn't have color changes, because it is more readable in email that way.) This relates to a change in the C++ language spec, regarding friends. The compiler was changed with gcc 4.1, breaking code done to the old standard. From the gcc documentation: `-ffriend-injection' Inject friend functions into the enclosing namespace, so that they are visible outside the scope of the class in which they are declared. Friend functions were documented to work this way in the old Annotated C++ Reference Manual, and versions of G++ before 4.1 always worked that way. However, in ISO C++ a friend function which is not declared in an enclosing scope can only be found using argument dependent lookup. This option causes friends to be injected as they were in earlier releases. = Gnucap was done according to the "old Annotated C++ Reference Manual". The best way to handle the problem is to get the latest development version of gnucap. Official site: http://www.gnucap.org/devel/gnucap-2006-07-08.tar.gz Mirrors: http://www.geda.seul.org/dist/gnucap-2006-07-08.tar.gz Alternatively, you can patch the one you have: Change the file src/configure, line 22: from: echo "-DUNIX -O2 -DNDEBUG -I.. -I. -W" >>Make.ccflags to: echo "-DUNIX -O2 -DNDEBUG -I.. -I. -W -ffriend-injection" >>Make.ccflags This adds the compiler option "-ffriend-injection", which reverts to the old behavior. A third way to deal with this is to use an older compiler. It works on 4.0. ___ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
gEDA-user: Installation Problem
Still having problem with gEDA installation on Suse 10.1. I get the following. Noting shows up under libtermcap in yast, libreadline-java exists though. Any suggestions on what the problem is? I am not that knowledgeable on these things. Art /home/afore/geda-sources/gnucap/gnucap-2006-01-17 ./configure --prefix=/home/afore/geda-install Configuring gnucap using --prefix=/home/afore/geda-install [0m/usr/lib/gcc/i586-suse-linux/4.1.0/../../../../i586-suse-linux/bin/ld: cannot find -ltermcap [0mcollect2: ld returned 1 exit status either libtermcap or libreadline is missing - not using readline make (cd modelgen; make -k) make[1]: Entering directory `/home/afore/geda-sources/gnucap/gnucap-2006-01-17/modelgen' (cd O; make -k) make[2]: Entering directory `/home/afore/geda-sources/gnucap/gnucap-2006-01-17/modelgen/O' g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_main.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_out_h.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_error.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_in.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_out_common.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_out_dev.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_out_lib.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_out_model.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../mg_out_root.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../ap_construct.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../ap_convert.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../ap_get.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../ap_match.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W -c ../ap_skip.cc rm gnucap-modelgen >/dev/null 2>&1 make[2]: [gnucap-modelgen] Error 1 (ignored) g++ -DUNIX -O2 -DNDEBUG -I.. -I. -fexceptions -W mg_main.o mg_out_h.o mg_error.o mg_in.o mg_out_common.o mg_out_dev.o mg_out_lib.o mg_out_model.o mg_out_root.o ap_construct.o ap_convert.o ap_get.o ap_match.o ap_skip.o -o gnucap-modelgen -lm make[2]: Leaving directory `/home/afore/geda-sources/gnucap/gnucap-2006-01-17/modelgen/O' make[1]: Leaving directory `/home/afore/geda-sources/gnucap/gnucap-2006-01-17/modelgen' (cd src; make -k) make[1]: Entering directory `/home/afore/geda-sources/gnucap/gnucap-2006-01-17/src' (cd O; make -k) make[2]: Entering directory `/home/afore/geda-sources/gnucap/gnucap-2006-01-17/src/O' g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../md.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../globals.cc [34m../e_card.h: In funST::fat_iterator findbranch(CS&, CARD_LIST*)’: [0m[1;31m../e_card.h:[0m[1;31m152:[0m[1;31m error: cannot convert ‘CARD_LIST::fat_iterator’ to ‘CARDo ‘CARD_LIST::fat_iterator findbranch(CS&, CARD_LIST*)’[0m [34m../e_compon.h: In member fuOMPONENT::attach_common(COMMON_COMPONENT*)’: [0m[1;31m../e_compon.h:[0m[1;31m139:[0m[1;31m error: ‘::attach_common’ has not been declared[0m [34m../e_compon.h: In member fuOMPONENT::detach_common()’: [0m[1;31m../e_compon.h:[0m[1;31m140:[0m[1;31m error: ‘::detach_common’ has not been declared[0m make[2]: *** [globals.o] Error 1 g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_opt1.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_opt2.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io_contr.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io_error.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io_findf.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io_getln.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io_out.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../ap_construct.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../ap_convert.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../ap_error.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../ap_get.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../ap_match.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../ap_skip.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../m_fft.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../m_spline.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../l_ftos.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../l_timer.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../l_trim.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../io_xopen.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../l_pmatch.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../l_wmatch.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_nodemap.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_sdp.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_parameter.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_prblst.cc [34m../e_card.h: In funST::fat_iterator findbranch(CS&, CARD_LIST*)’: [0m[1;31m../e_card.h:[0m[1;31m152:[0m[1;31m error: cannot convert ‘CARD_LIST::fat_iterator’ to ‘CARDo ‘CARD_LIST::fat_iterator findbranch(CS&, CARD_LIST*)’[0m make[2]: *** [u_prblst.o] Error 1 g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_probe.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I. -W -c ../u_xprobe.cc g++ -DUNIX -O2 -DNDEBUG -I.. -I
gEDA-user: Installation problem
Ran into these errors on the installation. Can someone tell me what the problem is? This is on Suse 10.1 32-bit. gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include/libpng12 -I/opt/gnome/include/gtk-2.0 -I/opt/gnome/lib/gtk-2.0/include -I/opt/gnome/include/atk-1.0 -I/opt/gnome/include/pango-1.0 -I/opt/gnome/include/glib-2.0 -I/opt/gnome/lib/glib-2.0/include -I/usr/X11R6/include -I/opt/gnome/include/gtk-2.0 -I/opt/gnome/include/glib-2.0 -I/opt/gnome/lib/glib-2.0/include -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include/libpng12 -I/opt/gnome/include/gtk-2.0 -I/opt/gnome/lib/gtk-2.0/include -I/opt/gnome/include/pango-1.0 -I/opt/gnome/include/glib-2.0 -I/opt/gnome/lib/glib-2.0/include -Wall -g -O2 -MT o_picture.lo -MD -MP -MF .deps/o_picture.Tpo -c o_picture.c -o o_picture.o >/dev/null 2>&1 make[3]: *** [o_picture.lo] Error 1 make[3]: Leaving directory `/home/afore/geda-sources/gedagaf/libgeda-20060123/src' make[2]: *** [install] Error 2 make[2]: Leaving directory `/home/afore/geda-sources/gedagaf/libgeda-20060123/src' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/afore/geda-sources/gedagaf/libgeda-20060123' make: *** [libgeda_install] Error 2 == Error! == Failure compiling "make libgeda_install", shall I continue with remainder of programs? I have experienced an error while installing this program! Error string: Failure compiling "make libgeda_install", shall I continue with remainder of programs? I click continue, then get: 1;31mconvert_sym.c:[0m[1;31m47:[0m[1;31m28: error: libgeda/colors.h: No such file or directory[0m [34mconvert_sym.c: In function ‘do_unattached_attribute’: [0m[1;31mconvert_sym.c:[0m[1;31m605:[0m[1;31m error: ‘DETACHED_ATTRIBUTEared (first use in this function)[0m [1;31mconvert_sym.c:[0m[1;31m605:[0m[1;31m error: (Each undeclared identifier is reported only once[0m [1;31mconvert_sym.c:[0m[1;31m605:[0m[1;31m error: for each function it appears in.)[0m [34mconvert_sym.c: In function ‘do_attached_attribute’: [0m[1;31mconvert_sym.c:[0m[1;31m689:[0m[1;31m error: ‘ATTRIBUTE_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_text’: [0m[1;31mconvert_sym.c:[0m[1;31m895:[0m[1;31m error: ‘TEXT_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_line’: [0m[1;31mconvert_sym.c:[0m[1;31m953:[0m[1;31m error: ‘GRAPHIC_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_pin’: [0m[1;31mconvert_sym.c:[0m[1;31m972:[0m[1;31m error: ‘LOGIC_BUBBLE_COLOR’ undeclared (first use in this function)[0m [1;31mconvert_sym.c:[0m[1;31m1002:[0m[1;31m error: ‘PIN_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_box’: [0m[1;31mconvert_sym.c:[0m[1;31m1140:[0m[1;31m error: ‘GRAPHIC_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_circle’: [0m[1;31mconvert_sym.c:[0m[1;31m1173:[0m[1;31m error: ‘GRAPHIC_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_arc’: [0m[1;31mconvert_sym.c:[0m[1;31m1217:[0m[1;31m error: ‘GRAPHIC_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_label’: [0m[1;31mconvert_sym.c:[0m[1;31m1304:[0m[1;31m error: ‘ATTRIBUTEared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_net_segment’: [0m[1;31mconvert_sym.c:[0m[1;31m1433:[0m[1;31m error: ‘NET_COLOR’ undeclared (first use in this function)[0m [34mconvert_sym.c: In function ‘do_net_segment_bus’: [0m[1;31mconvert_sym.c:[0m[1;31m1464:[0m[1;31m error: ‘BUS_COLOR’ undeclared (first use in this function)[0m make[3]: *** [convert_sym-convert_sym.o] Error 1 make[3]: Leaving directory `/home/afore/geda-sources/gedagaf/geda-utils-20060123/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/afore/geda-sources/gedagaf/geda-utils-20060123' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/afore/geda-sources/gedagaf/geda-utils-20060123' make: *** [geda-utils-20060123/src/gmk_sym] Error 2 == Error! == Failure compiling "make utils_install", shall I continue with remainder of programs? I have experienced an error while installing this program! Error string: Failure compiling "make utils_install", shall I continue with remainder of programs? Then I get this after conuing: Making all in src make[3]: Entering directory `/home/afore/geda-sources/gedagaf/geda-gsymcheck-20060123/src' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I/home/afore/geda-install/include -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include/libpng12 -I/opt/gnome/include/gtk-2.0 -I/opt/gnome/lib/gtk-2.0/include -I/opt/gnome/include/atk-1.0 -I/opt/gnome/include/pang