Re: [gentoo-user] Host, Schmost!
On Fri, Apr 01, 2005 at 03:03:46AM -0800, John Lowell wrote > > The setup here is almost trite: Three workstations with dynamic > addresses behind an ADSL router/switch which doubles as a dhcp > server, and the webserver mentioned earlier with a static address > outside the range authorized for dynamic service and with port 80 > forwarded. I have /etc/conf.d/net with iface_eth0="192,168.1.44 > Broadcast 192.168.0.255 NetMask 255.255.255.0" and gateway enabled > at 192.168.1.1. /etc/resolv.conf shows proper nameserver numbers. Two items 192,168.1.44 You have 192 comma 168 dot 1 dot 44 Should be 192 dot 168 dot 1 dot 44 Broadcast 192.168.0.255 Should be 192.168.1.255 -- Walter Dnes <[EMAIL PROTECTED]> An infinite number of monkeys pounding away on keyboards will eventually produce a report showing that Windows is more secure, and has a lower TCO, than linux. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Can't complete the install!
On Fri, Apr 01, 2005 at 11:05:08AM -0500, Robert G. Hays wrote > Nick, > > IPv6, huh? Hmmm Any way to tell it v4? Delay the "mirrorselect" command until just after the "chroot" command. The chrooted environment doesn't see ipv6, so you'll only get ipv4 mirrors. If all else fails, replace the GENTOO_MIRRORS in your /etc/make.conf with a copy of mine. Watch the line-wrap. GENTOO_MIRRORS="ftp://gentoo.netnitco.net/pub/mirrors/gentoo/source/ ftp://ftp.ndlug.nd.edu/pub/gentoo/ http://mirror.datapipe.net/gentoo http://mirror.datapipe.net/gentoo"; -- Walter Dnes <[EMAIL PROTECTED]> An infinite number of monkeys pounding away on keyboards will eventually produce a report showing that Windows is more secure, and has a lower TCO, than linux. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Building packages only when doing emerge world
On Sat, 2 Apr 2005, Nick Rout wrote: > I think the problem is that if you build a whole lot of packages only, > without installing them, then (because each package is not actually > installed on a live filesystem) any package that depends on an earlier > one will fail. > > I know what I'm saying, but it isn't coming out right... No it is, that makes sense. And your advice about moving in small steps was spot on. I would probably do a -uDtpv and emerge the small "subtrees" first and work up to the bigger packages. -- Aj. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Building packages only when doing emerge world
On Fri, 2005-04-01 at 23:45 -0500, A. Khattri wrote: > On Fri, 1 Apr 2005, Mike Turcotte wrote: > > > So what do I do if something fails when I emerge all this stuff? Is my > > server going to go down? I am just wondering if there is anything I can > > do to protect myself from downtime and errors. > > Im sorry but the previous post already answered the question by quoting > the documentation. > > An emerge that fails does *not* get merged into your file-system and > building binary packages also skips the merge step. (So how would it break > your server if the package never gets merged into your file system?) > > > man emerge I think the problem is that if you build a whole lot of packages only, without installing them, then (because each package is not actually installed on a live filesystem) any package that depends on an earlier one will fail. I know what I'm saying, but it isn't coming out right... > > -- Nick Rout <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Building packages only when doing emerge world
On Fri, 1 Apr 2005, Mike Turcotte wrote: > So what do I do if something fails when I emerge all this stuff? Is my > server going to go down? I am just wondering if there is anything I can > do to protect myself from downtime and errors. Im sorry but the previous post already answered the question by quoting the documentation. An emerge that fails does *not* get merged into your file-system and building binary packages also skips the merge step. (So how would it break your server if the package never gets merged into your file system?) man emerge -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Can't complete the install!
On Fri, 1 Apr 2005, Bradley Krumme wrote: > After you have the new system up and running, make your changes to > make.conf for your own personal customizations (gotta love > flexibility), then do 'emerge -e world' to rebuild everything with the > new customizations. Are you so god-awful lazy that you had to quote the entire thread when posting a reply?! Please observe correct netiquette! Thank you, -- Aj. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Building packages only when doing emerge world
On Fri, 2005-04-01 at 22:59 -0500, Mike Turcotte wrote: > So what do I do if something fails when I emerge all this stuff? Is my > server going to go down? I am just wondering if there is anything I can > do to protect myself from downtime and errors. I did a pretend emerge > and there are a TON of dependencies well I am no expert, but if you want to take it one step at a time, how about noting down what emerges portage wants to do (for example emerge -uDp world > ~/portage.todo then manually go through and install one at a time. Don't foprget that if an emerge fails it hasn't removed the old version. The old version isn't removed until after the new one is successfully built. One thing that could happen though is that a library might get updated with a version that is not completely backwards compatible. Then something that depends on the old version doesn't compile cleanly, you are left with the old version of the app, not working because the old library has disappeared. I think at some stage you need to bite the bullet though. A thought: if you installed a GRP, why not update to the latest GRP precompiled stuff, the 2005.0 binaries are pretty new :-) To do that I would do something like this: *download the package .iso for your arch *update portage to the same snapshot as used for the 2005.0 builds *mount the .iso in a known location *point gentoo at that location for its package directory *do an emerge -uDkp world to see what portage wants to do. * those last two can be combined with PKGDIR=/known/location emerge -uDkp world > > > Nick Rout wrote: > > >man emerge > > > >--buildpkgonly (-B) > > Creates binary packages for all ebuilds processed without > >actually merging the packages. This comes with the caveat that all > >build-time dependencies must already be emerged on the system. > > > > > >On Fri, 2005-04-01 at 20:51 -0500, Mike Turcotte wrote: > > > > > >>Hello I am updating a server I built some time ago using a GRP install. > >>I want to do an emerge -uD world, but I want to know for sure this is > >>going to work before doing this. Can I tell it somehow to compile all > >>the packages but not install them? > >> > >>-- > >>gentoo-user@gentoo.org mailing list > >> > >> > >> > > -- > gentoo-user@gentoo.org mailing list > -- Nick Rout <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Building packages only when doing emerge world
So what do I do if something fails when I emerge all this stuff? Is my server going to go down? I am just wondering if there is anything I can do to protect myself from downtime and errors. I did a pretend emerge and there are a TON of dependencies Nick Rout wrote: man emerge --buildpkgonly (-B) Creates binary packages for all ebuilds processed without actually merging the packages. This comes with the caveat that all build-time dependencies must already be emerged on the system. On Fri, 2005-04-01 at 20:51 -0500, Mike Turcotte wrote: Hello I am updating a server I built some time ago using a GRP install. I want to do an emerge -uD world, but I want to know for sure this is going to work before doing this. Can I tell it somehow to compile all the packages but not install them? -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
On Fri, 2005-04-01 at 11:15 -0800, John Lowell wrote: > - Original Message - > From: "Kashani" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, April 01, 2005 7:58 AM > Subject: Re: [gentoo-user] Host, Schmost! > > > > John Lowell wrote: > > > Thanks for writing. > > > > > > Broadcast with 0 is default in /etc/conf.d/net. I've tried it both ways > with > > > no difference being made. > > > > > > > Why don't we clear this up and have you post your ifconfig and netstat -rn > > > > kashani > > -- > > gentoo-user@gentoo.org mailing list > > > > > > > > Hi Kashani, > > I certainly can post ifconfig and will but the netstat -rn is a problem. The > command is not available to me with just the basic packages installed. This > was a fresh stage1. I'll need to reconfigure /etc/conf.d/net for dhcp > service to get the appropriate e-builld. Before I do that, have you any > other thoughts or recommendations? yeah for god's sake ifconfig and route -n > > jlowell > > > -- > gentoo-user@gentoo.org mailing list > -- Nick Rout <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Building packages only when doing emerge world
man emerge --buildpkgonly (-B) Creates binary packages for all ebuilds processed without actually merging the packages. This comes with the caveat that all build-time dependencies must already be emerged on the system. On Fri, 2005-04-01 at 20:51 -0500, Mike Turcotte wrote: > Hello I am updating a server I built some time ago using a GRP install. > I want to do an emerge -uD world, but I want to know for sure this is > going to work before doing this. Can I tell it somehow to compile all > the packages but not install them? > > -- > gentoo-user@gentoo.org mailing list > -- Nick Rout <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
[gentoo-user] Vmware: Eject CD crashes VM
Has anybody else noticed this? It just gives an "11 exception" and dies with a core. I checked the log and it gives a register dump, etc. --Kurt -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Gentoo for the Windows NT Kernel
Derek Hansen wrote: > I have to admit, it had me going for just a little while... Not me. I first saw it on /. Today, a *real* news story was the exception on /. For more april fools fun, Strongbad fans can check out: http://www.homestarrunner.com -- G a b r i e l M . B e d d i n g f i e l d -- gentoo-user@gentoo.org mailing list
[gentoo-user] Building packages only when doing emerge world
Hello I am updating a server I built some time ago using a GRP install. I want to do an emerge -uD world, but I want to know for sure this is going to work before doing this. Can I tell it somehow to compile all the packages but not install them? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Service named already provided by dns!
On Fri, 2005-04-01 at 10:07 -0700, Kiawud wrote: > Out of curiosity, what would happen if you modified the > '/etc/init.d/named' file and commented out the line: > > provide dns > > Would that prevent Gentoo from thinking the '/etc/init.d/named' > provided the 'dns' service? The best way to find out (short of reading and understanding the whole runlevel source code thing) would be to try it and see. > > Just a thought. > > -Hani > -- > gentoo-user@gentoo.org mailing list > -- Nick Rout <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
On Fri, 2005-04-01 at 10:23 -0800, John Lowell wrote: > Uwe, > > Thanks for writing. > > Broadcast with 0 is default in /etc/conf.d/net. I've tried it both > ways with > no difference being made. > > Regards. > > jlowell John, how about giving us the output of ifconfig and route -n on the offending machine. -- Nick Rout <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
[gentoo-user] ACPI events config file
Hi I am setting up my ACPI on my notebook and have come across a small problem. I am setting the events in the /etc/acpi/events/default config file. Now I have got the ac_adapter event working nicely with speedfreq. Now I want to setup my power button and sleep button. This is from the acpid log file: [Sat Apr 2 00:16:30 2005] starting up [Sat Apr 2 00:16:30 2005] 1 rule loaded [Sat Apr 2 00:16:35 2005] received event "button/lid LID 0080 0005" [Sat Apr 2 00:16:35 2005] completed event "button/lid LID 0080 0005" [Sat Apr 2 00:16:39 2005] received event "button/lid LID 0080 0006" [Sat Apr 2 00:16:39 2005] completed event "button/lid LID 0080 0006" [Sat Apr 2 00:19:36 2005] received event "button/sleep SLPB 0080 0002" [Sat Apr 2 00:19:36 2005] completed event "button/sleep SLPB 0080 0002" [Sat Apr 2 00:20:05 2005] received event "button/power PWRF 0080 0002" [Sat Apr 2 00:20:05 2005] completed event "button/power PWRF 0080 0002" [Sat Apr 2 00:21:32 2005] exiting As you can see the acpid sees the sleep button lid and power button being triggered. Now it is just a matter of getting it to do something with the event. Here is my /etc/acpi/events/default file: event=button power.* action=/etc/acpi/sleep.sh #action=/sbin/init 0 event=button sleep.* action=/etc/acpi/sleep.sh event=button[ /]lid.* action=/etc/acpi/sleep.sh event=ac_adapter.* action=/etc/acpi/ac.sh As I said above my ac_adapter works perfectly its just now to get the events working for the others. All the sleep.sh scipt does is tell logger to log "Zzz" so that I can check whether the event is working or not. Any ideas as to why it is not working correctly? I suspect it is the way I am defining the events seeing that the sleep power and lid are all under the buttons director where ac_adapter is on in its own directory. Thanks Cheers Rav -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Apr 1, 2005 3:34 PM, David Morgan <[EMAIL PROTECTED]> wrote: > On Apr 2, 2005 12:19 AM, Ciaran McCreesh <[EMAIL PROTECTED]> wrote: > > On Fri, 1 Apr 2005 13:41:05 -0800 Mark Knecht <[EMAIL PROTECTED]> > > wrote: > > | And since it's GMail I cannot control any of this. > > > > You are free to use a different email provider if you wish. As the Gentoo List Administrator is free to change the operation back to the way it was. As I said earlier, I have no problem with this one way of another. I have no problem with trying to remember to erase the duplicate, which I will try to do, and I have no problem if I forget and a duplicate gets sent. > > I don't see the problem - I'm sending this using gmail's web thing, > and all I did was click in the box, and it's going to send the email > to [EMAIL PROTECTED] > > If it's sending/cc'ing it anywhere else, it's not telling me about it Yes, that does work for me also. However on other lists I'm on that normally sends only the the person who sent the message to that list and not to the list itself. To get copies back to the list I have to hit reply all so that's what I normally do and why I sometimes have made mistakes in this area over the last few days. Cheers, Mark -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Apr 2, 2005 12:19 AM, Ciaran McCreesh <[EMAIL PROTECTED]> wrote: > On Fri, 1 Apr 2005 13:41:05 -0800 Mark Knecht <[EMAIL PROTECTED]> > wrote: > | And since it's GMail I cannot control any of this. > > You are free to use a different email provider if you wish. > > -- > Ciaran McCreesh : Gentoo Developer (Vim, Fluxbox, shell tools) > Mail: ciaranm at gentoo.org > Web : http://dev.gentoo.org/~ciaranm > > > I don't see the problem - I'm sending this using gmail's web thing, and all I did was click in the box, and it's going to send the email to [EMAIL PROTECTED] If it's sending/cc'ing it anywhere else, it's not telling me about it -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Fri, 1 Apr 2005 13:41:05 -0800 Mark Knecht <[EMAIL PROTECTED]> wrote: | And since it's GMail I cannot control any of this. You are free to use a different email provider if you wish. -- Ciaran McCreesh : Gentoo Developer (Vim, Fluxbox, shell tools) Mail: ciaranm at gentoo.org Web : http://dev.gentoo.org/~ciaranm pgpX02FdILhJi.pgp Description: PGP signature
Re: [gentoo-user] Gentoo for the Windows NT Kernel
Stroller wrote: I'm not sure of the details, and whether the project is completed or under development, but Microsoft do indeed intend that one should be able to run Linux apps on their XP server products. I _think_ this is via system calls rather than a virtual machine, but I don't really know - I'm sure a Google would reveal more. Recently the Seattle Times news paper had an article about how Microsoft has a large (1000+ computer) lab dedicated to studying Linux, wish I could find the article... /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg-x11: truetype-fonts vs. type1-fonts
> Depends on if you need some font(s) that are only in the M$ list. > > & quality depends mostly on size & capabilities of the intended output > device... > > rgh Has anyone compared truetype and type1 fonts rendered on something comparable to a 15" LCD? - Grant > >>Nope, Type1 are high quality fonts from Adobe. Truetype are fonts > >>introduced by M$. They are of lower quality. > >> > >>Frank > >> > >> > > > >Is it beneficial to build both of them into an xorg installation or is > >that a waste? > > > >- Grant > > > > > > > >>On Wed, 2005-03-30 at 13:32 -0800, Grant wrote: > >> > >> > >>>Are the USE flags 'truetype-fonts' and 'type1-fonts' in xorg-x11 meant > >>>to be substitutes for each other? I'm running the xfs font server, > >>>and I know I'm supposed to keep my installed fonts down to those I > >>>want. > >>> > >>>- Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
Bradley: I hope you're not making fun of the makarena, I happen to like it! < with grin underneath!> Chris: & whyinhell would you want the NT kernel on your computer in the first place?; worst of both worlds!:: Windoze crash/kernel & Linux crash/GUI? Get Win4Lin & do it right: Linux bulletproof/kernel & Windoze excellent/GUI. (& I hate saying that last, but Truth Is, & I don't lie (not deliberately, anyway!)). Mark: Good One, Indeed! Re Windoze/Gentoo, how about this:: Got Execrable Nasty Tottering Odoriferous Offal ? Leo: Re programming, OO does help a little, but careful design *is* more imporant, so yup!, you're right! rgh Bradley Krumme wrote: On Apr 1, 2005 11:59 AM, Mark Knecht <[EMAIL PROTECTED]> wrote: It's got to be an april fool's joke... Has to be. Why else would it use "NT" and "comercial-grade" in the same paragraph? Not really. Don't you know that GENTOO == Gee Everyone NT's Object Oriented? I'm not a programmer but I hear that Object Oriented programming makes it trivial to port anything to anything. I'm not the least bit surprised to hear this... - Mark -- gentoo-user@gentoo.org mailing list That's funny. I saw a couple other things today, too. I did an 'emerge -uD --newuse world' today which upgraded mplayer to mplayer-1.0_pre6-r2. If I hadn't been watching, I wouldn't have seen it, but there was a message that looked like this: !!! ERROR: media-video/mplayer-1.0_pre6-r2 failed. !!! Function src_makarena, Line 1000, Exitcode 555- !!! All your base are belong to us! * APRIL FOOLS! so it looks like the Gentoo devs are having a good time today :D -- Brad -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT Gentoo firewall appliances?
On Fri, 1 Apr 2005, James wrote: > Hardware choices are another issue. Since the connection will be > light to moderate on bandwidth, any of the 300MHz+ little embedded > firewall-box-appliance type of devices should suffice. The question > is which one (3+ etherports) as if it is opensource and gentoo driven, > I'd put that one at the top of the list. Anybody sell or recommend > gentoo ready (Via, EPia, ..., or non x86 embedded) linux firewall box? > > Low power is of interest too. Dont know if this is of any use, but the LinkSys routers are tiny Linux boxes and there's been some work on getting a specific distro for it (see openwrt.org). Dont know if you can use Gentoo to build this but it might be an interesting project :-) -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] anyone else having trouble with akgregator in kde 3.4?
"With the Power comes the Gory." rgh. Robert Persson wrote: On April 1, 2005 09:43 am, quoth Jeff Smelser: On Thursday 31 March 2005 04:29 pm, Robert Persson wrote: When I left-click on a link a new tab opens in akgregator, but the page doesn't load there and the page-loading progress bar hangs at 0%. Meanwhile the page loads in the external browser as it would if I had middle-clicked the link. Works just fine here.. Jeff Aha! I have just found that if I go into kcontrol->KDE Components->Component Chooser and set browser to open "based on contents the contents of the url" the problem goes away. As always, thanks for helping me on this one. Robert -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] used computer
So make a deal with the employer(s) of one or more friends & family to get them few dollars/whatever for computers they don't really use anymore, and take one computer (free?!) as your commission for the deal! lol & best! rgh John Shawger wrote: On Apr 1, 2005 1:15 AM, Rod <[EMAIL PROTECTED]> wrote: Have you tried looking into the company you work for? lol. I am a student. That's why I don't have much money to spend. -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Cannot get Parallel Port to work
Hi, 1. Have you check what the command "dmesg" shows? 2. Are you running on udev? 3. Can you see the device under /dev for your printer (like lp0)? If you see the device, then it is just a matter of the cups configuration AFAIK. Try finding the parallel port in the dropdown that allows you to select the device for a new printer in the CUPS web interface (that runs at http://localhost:631 by default). If you see the paralell port there, then it means it is ready to use. HTH -AR On Apr 1, 2005 3:24 PM, Jamie Dobbs <[EMAIL PROTECTED]> wrote: > I've followed the instructions in the 'Gentoo Printing Guide' but can't > get my parallel printer to work. > I'm running kernel 2.6.9-gentoo-r1 and have recompiled for parallel port > support, pc-style hardware and enabled parallel printer support as per > the instructions in the guide. > I load the modules > > modprobe lp > modprobe parport > modprobe parport_pc > > but I don't get any indications in /var/log/messages that any parallel > ports have been found. > I know the parallel port is functional as it works from Windows and > worked from Mandrake Linux (for the very short time I had it installed). > > The printer is an HP Laserjet 4P and I have foomatic, cups and hpijs > emerged. > > Can anyone offer me any ideas on where I might start to diagnose this > problem? > > Thanks > > Jamie > -- > gentoo-user@gentoo.org mailing list > > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Apr 1, 2005 12:19 PM, Bryan Oestergaard <[EMAIL PROTECTED]> wrote: > No, not receiving duplicates due to filtering is certainly not what I > meant by fixing your clients. I was actually hinting at clients (and > users) behaving sensible and stop sending duplicates. > > btw, I have no idea whether gmail sends duplicates or not. > > Regards, > Bryan Østergaard > I don't think it sends 'duplicates'. It sends two emails to different addresses: gentoo-user@gentoo.org [EMAIL PROTECTED] The fact that the list administrator has decided to send email sent to [EMAIL PROTECTED] along to me (and you) is like signing me up to a list I didn't want to sigh up for. I signed up to receive email from one address. I get it from two? (If it happens at all. I don't know. I don't see it.) And since it's GMail I cannot control any of this. All I can say is that, in advance, I'm sorry for all the times in the future when I hit reply-all, since that's what I HAVE to do to reply to the 25 other lists I am subscribed to, and the list gets two copies. Gentoo-User can be the one odd ball if it wants to be. I'll try to be a good citizen, but so far I've hit reply-all at least 20 times and had to erase the entry by hand, just like I did this time... Cheers, Mark -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Can't complete the install!
On Apr 1, 2005 11:05 AM, Robert G. Hays <[EMAIL PROTECTED]> wrote: > Nick, > > IPv6, huh? Hmmm Any way to tell it v4? > > Local servers -- I did that, right under the 'stage 3' banner, and > several are known to me as v4 capable; used themseveral times. > > emerge-webrsync when it finishes says to now proceed with emerge --sync. > > Given that I really, really wanted to do stage-1 & lots of > custom/performance changes soon to get the best out of my system, don't > I still need to do this?, Probably with --world or something? > > Thank You!, > rgh. > > Nick Rout wrote: > > >To cut a long story short it looks like the notorious ipv6 problem - > >wherein mirrorselect choses ipv6 mirrors (because ipv6 is enabled on the > >boot cd) but your chroot does not use ipv6. > > > >Find a mirror near you and put it in /etc/make.conf manually (within the > >chroot), the mirror list is easy to find off the main gentoo.org page. > > > > > >If that doesn't work use emerge-webrsync - once you have done that you > >have enough to complete the install, you don't need to emerge --sync > >after emerge-webrsync. > > > >On Thu, 2005-03-31 at 21:49 -0500, Robert G. Hays wrote: > > > > > >>Gentoo universal CD + packages CD, 2004.3 > >> > >>By-the-book, literally -- I printed it and punched it into binder ! > >> > >>Note that I am typing & sending this in Windows, thus some data may be > >>off a *little*, since Gentoo doesn't work. > >> > >> > >>- > >>stage 1 install : > >>- > >> > >>Tried mirrorselect -a & -i, both: with & without -bX > >> > >>emerge --sync only finds raven, raptor, heron, hawk, crane, & cockatoo > >>servers, no matter what. > >>First server hit in a given run gets to about app-admin/?/io.c, at which > >>point it gives code 30 at line 109 & code 12 at line 189 and times out, > >>follow-on servers give nothing except list-of-files. > >> > >>emerge-webrsync finds one server, I forget which. Says no md5's > >>available at all, and quits. > >> > >> > >>- > >>stage 3 install : > >>- > >> > >>same, even after I 'select with -o -i & -b10, picking ~12 *new* servers > >>& retrying ~11 times. > >>(Yes I mean that 'emerge --sync' hits the same 6 servers, or rather 4 of > >>them per run, ignoring the servers I selected, or, retrying 11 times, -a > >>-s12, recycles through same old 6.) > >> > >>emerge-webrsync finally found a server *I* told it to find, apparently > >>worked, but... emerge --sync performed per previous paragraph, except > >>different files fetched, still the "io.c" errors above. > >> > >>... > >> > >>Rebooted to hdisk. > >> > >>Still can't get anything else, except one-at-a-time, and that has trouble. > >> > >>Can compile bzImage, can NOT compile modules without crash; seg-fault in > >>various files, kernel panic in others. > >> > >>(SuSE 9.0 on target drive for ~10 months can compile anything, far more > >>in a row than required to crash Gentoo-compiles, but oldconfig-bzImage > >>does not match booted kernel, thus I will NOT patch-&c. Otherwise, SuSE > >>runs fine, always, no matter what the load.) > >> > >>And yes I dotted all the 'i's that I know of, in all above; 20+ years > >>programming and everything else; I *do* know how to RTFM & *follow* it. > >> > >> > >>- > >>Hardware &c..: > >>- > >> > >>Shuttle AN35N 400 Ultra+MCP mobo w/nVidia nForce2 chip ~6 months old. > >>Never gets over ~45c. > >> > >>AMD XP 2700+, never gets over 51C, and that only once -- otherwise never > >>over 47c. > >> > >>NO over-/under- -clock/-voltage. > >> > >>1GB Centon RAM, as 512+256+256. www.simmtester.com for 12 hours no > >>errors, repeatedly. > >> > >>Maxtor 30G hda. (Testing hd; will only fornicate with 'real' 120G when > >>all works RIGHT.) > >> > >>ATI All-In-Wonder 9600 video 128MB, AGP8 > >> > >>Sound Blaster Live Value PCI > >> > >>3Com '3c59x' NIC, PCI > >> > >>On-board Realtek sound & nic both turned off. > >> > >>All BIOS parms set for precisely what I have. Precisely. > >>- > >>Netgear RP114 (updated) router between nic & Westell modem to phone-co > >>(bellsouth) DSL 1.5m/256k. > >>- > >>Drive-parts: > >>1) 512M dos > >>2) 200M linux boot > >>3) ~5.5G Win98/f32 > >>4) (extended) > >>5) 1G unused limux (all-in-one) > >>6) 15M hidden dos > >>7) 15M dos > >>8) ~1G f32 > >>9) ~1G f32 > >>10) 1G swap > >>11) linux /, to end of drive; ~~20G. > >>grub in 2). > >>- > >>Partitions & router are NOT negotiable! > >> > >>I NEED correct ATI drivers to get *ALL* functionality avail on video card. > >>I NEED Win4Lin (for W98se under linux to solve native-mode issues). > >>I intend other things, but these two are NOT negotiable, or else I'll > >>just have to keep running Wunnerful-Hic!-Winders98SE-HIC!!. > >> > >>**POSSIBLE** that the 30G hd is bad, but I doubt, rest of machine is as > >>solid as a planet. > >> > >>Why crashes & ignoring selected servers? > >> > >>PLEASE help! > >> > >>Thank you,
Re: [gentoo-user] Gentoo for the Windows NT Kernel
On Apr 1, 2005, at 5:59 pm, Leo wrote: Is the part about MS buying the posix interface it true? I can't believe I fell for this even if just for the 5 minutes I though about how useless running linux on the NT kernel would be. I'd like to have that second sentence framed & hung on the wall of every corporate manager on the planet. It won't make any difference, of course, but the engineers will at least be able to point at it afterwards and say "we told you so". I'm not sure of the details, and whether the project is completed or under development, but Microsoft do indeed intend that one should be able to run Linux apps on their XP server products. I _think_ this is via system calls rather than a virtual machine, but I don't really know - I'm sure a Google would reveal more. Stroller. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Cannot get Parallel Port to work *RESOLVED*
After emerging kernel-2.6.11-gentoo-r4 and compiling the parallel port now works and I can print successfully. Still having some issues getting some things I had working under the old kernel working under the new one (lmsensors), but I should get that sorted out shortly. Jamie Dobbs wrote: >I've followed the instructions in the 'Gentoo Printing Guide' but can't >get my parallel printer to work. >I'm running kernel 2.6.9-gentoo-r1 and have recompiled for parallel port >support, pc-style hardware and enabled parallel printer support as per >the instructions in the guide. >I load the modules > >modprobe lp >modprobe parport >modprobe parport_pc > >but I don't get any indications in /var/log/messages that any parallel >ports have been found. >I know the parallel port is functional as it works from Windows and >worked from Mandrake Linux (for the very short time I had it installed). > >The printer is an HP Laserjet 4P and I have foomatic, cups and hpijs >emerged. > >Can anyone offer me any ideas on where I might start to diagnose this >problem? > >Thanks > >Jamie >-- >gentoo-user@gentoo.org mailing list > > > > > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
No, not receiving duplicates due to filtering is certainly not what I meant by fixing your clients. I was actually hinting at clients (and users) behaving sensible and stop sending duplicates. btw, I have no idea whether gmail sends duplicates or not. Regards, Bryan Ãstergaard > > OK by me. GMail recognizes this is happening. Through this whole silly > change over I've never received a duplicate email, either from my > mistakes or those mistakes by others. This problem is a non problem > for me no matter whether I hit reply or reply-all. > > Is that what the devs meant by 'fix your client'? If so, mine's fixed! ;-) > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Apr 1, 2005 9:34 AM, A. Khattri <[EMAIL PROTECTED]> wrote: > On Fri, 1 Apr 2005, Dave Nebinger wrote: > > > Obviously. That's why you're still posting to [EMAIL PROTECTED] > > Why not make that email address bounce back to the sender? Im sure it will > sink in faster :-) > OK by me. GMail recognizes this is happening. Through this whole silly change over I've never received a duplicate email, either from my mistakes or those mistakes by others. This problem is a non problem for me no matter whether I hit reply or reply-all. Is that what the devs meant by 'fix your client'? If so, mine's fixed! ;-) Happy April 1st. Cheers, Mark -- gentoo-user@gentoo.org mailing list
[gentoo-user] OT Gentoo firewall appliances?
Hello all, Being asked to build a new firewall, no doubt Gentoo is the distro. Hardware choices are another issue. Since the connection will be light to moderate on bandwidth, any of the 300MHz+ little embedded firewall-box-appliance type of devices should suffice. The question is which one (3+ etherports) as if it is opensource and gentoo driven, I'd put that one at the top of the list. Anybody sell or recommend gentoo ready (Via, EPia, ..., or non x86 embedded) linux firewall box? Low power is of interest too. Here's a nice article on embedded linux devices and CompactFlash: http://www.linuxjournal.com/article/7383 James -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Listing injected files
On Friday 25 March 2005 19:08, PK wrote: > I have found thats its easier to emerge -i file/name when co,ing > across a bad package or something then waiting for an update to > portage or a new package then re emerging the lot > > is there a command that lists all injected packages? > > -- No one answered the original question... Try this: http://gentooexperimental.org/script/repo/show/54 Ciao Francesco -- Linux Version 2.6.12-rc1, Compiled #7 Sun Mar 20 08:26:19 CET 2005 One 1.53GHz AMD Athlon XP Processor, 2.5GB RAM, 3022.84 Bogomips Total macula -- gentoo-user@gentoo.org mailing list
[gentoo-user] SSH/SFTP oddities
List, I've got a box that my SFTP is not working properly one, or at least I think it's not. I can SSH to the box fine with root or any another user, no problems. I can SFTP to the box from a console on a different machine. When I use jEdit to connect via SFTP it says that I have not authenticated, when I use this other Windows SFTP tool (not psftp) it has a dialog that pops up after authentication four times, like perhaps SFTP is spitting out control characters or something that is confusing jEdit (on Linux and Win32) and the other Win32 tool? I can use the same jEdit or the Win32 SSH tools to connect to three another gentoo machines just fine. All are using 2004.3 and have the same configs for sshd and pam an such. I turned up the logging of sshd and even ran in the -d mode to test but saw nothing there. Ideas? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Arts don't work
Hi, On Friday 01 April 2005 15:24, Nuno Alexandre Neves Raimundo wrote: > I have a problem with arts, i doesn't work!!! > > In the sound system module of the control center i can't enable the sound > system. The progress bar go to 90% and then go to 0%, over an over. > > In the console, fi i execute artsd, the fowling error apears: > unix_connect: can't connect to server > (unix:/tmp/mcop-neves/localhost-541d-424d4a13) > Segmentation fault > > I have kde 3.4 > -- > gentoo-user@gentoo.org mailing list hm, but you are logged in as the same user as you want to start arts? Have you tried re-emerging it? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] ssh authentication wierdness
On Fri, 1 Apr 2005, Robert Persson wrote: > Thanks everybody! > > Got it now. (I was confused by a number of other errors happening at the same > time). > > ssh -v zebedee showed that "zebedee" was being translated as 127.0.0.1, > despite what it says in /etc/hosts. Adding "ListenAddress 127.0.0.1" to > sshd_config did the trick. Err... 127.0.0.1 means "localhost", so if zebedee is on another machine then that's not quite right. > The other problem that was confusing everything is still a problem though. > When I start the machine the /etc/init.d/sshd script doesn't start > sshd, /etc/init.d/sshd restart doesn't work and /etc/init.d/sshd status > tells me that sshd is running when it isn't . I have to /usr/sbin/sshd > manually, after which the script works properly. /etc/init.d/sshd zap /etc/init.d/sshd start rc-update add sshd default -- -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Monthly BugDay reminder!
On Fri, 1 Apr 2005, Dave Nebinger wrote: > Obviously. That's why you're still posting to [EMAIL PROTECTED] Why not make that email address bounce back to the sender? Im sure it will sink in faster :-) -- -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] apache-1.3.33 with mod_perl and mod_php
On Fri, 1 Apr 2005, Felipe de Jesús Molina Bravo wrote: > so, I write this, because, I found a solution to my problem. And there > is how I solved it: > > #ebuild /path/of/mod_php.ebuild fetch > #ebuild /path/of/mod_perl.ebuild fetch > #ebuild /path/of/apache-1.3.33.ebuild fetch > > #ebuild /path/of/mod_php.ebuild unpack > #ebuild /path/of/mod_perl.ebuild unpack > #ebuild /path/of/apache-1.3.33.ebuild unpack > > Configure and compile, of course mod_php and mod_perl as static modules > for apache (read the install of mod_perl and mod_php) > > #touch .configure > for each work directoy (mod_php, mod_perl and apache) > in order to tell portage that mod_php,mod_perl and apache are compiled > > #ebuild apache install > > #ebuild apache qmerge In other words you did a manual install. You may want to look at modifying the ebuild and making your own "local" ebuild for apache and mod_perl (just copy the existing ebuilds into a local copy under /usr/local/portage and modify them as needed, then set PORTAGE_OVERLAY in /etc/make.conf to activate it). It would make future custom installs easier for you and everything is still handled by using a single emerge command as normal. -- -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] ssh authentication wierdness
> The other problem that was confusing everything is still a problem though. > When I start the machine the /etc/init.d/sshd script doesn't start > sshd, /etc/init.d/sshd restart doesn't work and /etc/init.d/sshd status > tells me that sshd is running when it isn't . I have to /usr/sbin/sshd > manually, after which the script works properly. 1. kill sshd 2. remove /var/lib/init.d/started/sshd 3. rc-update add sshd default to ensure it is started when the system comes up. 4. /etc/init.d/sshd start to restart the daemon. That should fix the remaining issues. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] anyone else having trouble with akgregator in kde 3.4?
On April 1, 2005 09:43 am, quoth Jeff Smelser: > On Thursday 31 March 2005 04:29 pm, Robert Persson wrote: > > When I left-click on a link a new tab opens in akgregator, but the page > > doesn't load there and the page-loading progress bar hangs at 0%. > > Meanwhile the page loads in the external browser as it would if I had > > middle-clicked the link. > > Works just fine here.. > > Jeff Aha! I have just found that if I go into kcontrol->KDE Components->Component Chooser and set browser to open "based on contents the contents of the url" the problem goes away. As always, thanks for helping me on this one. Robert -- Robert Persson "No matter how much ye shake yer peg The last wee drap rins doon yer leg." -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] ssh authentication wierdness
Thanks everybody! Got it now. (I was confused by a number of other errors happening at the same time). ssh -v zebedee showed that "zebedee" was being translated as 127.0.0.1, despite what it says in /etc/hosts. Adding "ListenAddress 127.0.0.1" to sshd_config did the trick. The other problem that was confusing everything is still a problem though. When I start the machine the /etc/init.d/sshd script doesn't start sshd, /etc/init.d/sshd restart doesn't work and /etc/init.d/sshd status tells me that sshd is running when it isn't . I have to /usr/sbin/sshd manually, after which the script works properly. Robert On March 31, 2005 08:58 pm, quoth Zarick Lau: > Hi, > > On 31/Mar/05, Robert Persson wrote: > > I have been trying to get ssh to start behaving and, among other > > problems, I am unable to get ssh/sshd - one of the two - to deal with > > hostnames properly. > > > > For instance I have just been trying to ssh into the machine I am working > > on. In /etc/hosts is the line "192.168.1.2 zebedee". However "ssh > > 192.168.1.2" works, while "ssh zebedee" gets me a "connection refused" > > error. I get the same problem when I try to log in from a remote OSX > > powerbook. However I did not get this problem when I was running SuSE > > 9.2. > > > > Why can't I use a hostname to log in? > > What about 'ping zebedee' doesn't ping get the IP address correctly? > If no, then, the problem is due to sshd. You may check out nsswitch.conf > make sure there is a line like: > hosts:files dns > > Also, just to be care.. I'd ask, where are you trying to use 'ssh' to > connect to the ssh server? The same host, or other machine on the > network? > > Last, you may use ssh -v zebedee, you may see more verbsoe message. > > cheers, > Zarick > -- > gentoo-user@gentoo.org mailing list -- Robert Persson [EMAIL PROTECTED] YahooMess:ireneshusband AIM:shamanicpolice "No matter how much ye shake yer peg The last wee drap rins doon yer leg." -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] used computer
On Apr 1, 2005 1:15 AM, Rod <[EMAIL PROTECTED]> wrote: > Have you tried looking into the company you work for? lol. I am a student. That's why I don't have much money to spend. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] anyone else having trouble with akgregator in kde 3.4?
On Thursday 31 March 2005 04:29 pm, Robert Persson wrote: > When I left-click on a link a new tab opens in akgregator, but the page > doesn't load there and the page-loading progress bar hangs at 0%. > Meanwhile the page loads in the external browser as it would if I had > middle-clicked the link. Works just fine here.. Jeff pgpsEW58H8TV4.pgp Description: PGP signature
RE: [gentoo-user] Monthly BugDay reminder!
> To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Re: [gentoo-user] Monthly BugDay reminder! > > On Apr 1, 2005 8:39 AM, Ciaran McCreesh <[EMAIL PROTECTED]> wrote: > > On Fri, 01 Apr 2005 22:10:00 +1200 Nick Rout <[EMAIL PROTECTED]> wrote: > > | I say again, no other list I am on exhibits this problem, just bloody > > | change it back the the way it used to be, right, wrong or debateable > > | in technical terms. what is easiest and most convenient for the > > | majority of users, and causes the least annoyances, is the "right" > > | config > > > > gentoo-user is the only list where that change was causing problems. > > None of the other lists are having problems with it. I wonder why? > > April Fool's Joke? Because we user's are stupid? ;-) Obviously. That's why you're still posting to [EMAIL PROTECTED] How many times do people need to be told to not post to that address before it sinks in? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
On Apr 1, 2005 11:59 AM, Mark Knecht <[EMAIL PROTECTED]> wrote: > > >It's got to be an april fool's joke... > > > Has to be. Why else would it use "NT" and "comercial-grade" in the same > > paragraph? > > Not really. Don't you know that > > GENTOO == Gee Everyone NT's Object Oriented? > > I'm not a programmer but I hear that Object Oriented programming makes > it trivial to port anything to anything. I'm not the least bit > surprised to hear this... > > - Mark > -- > gentoo-user@gentoo.org mailing list > > That's funny. I saw a couple other things today, too. I did an 'emerge -uD --newuse world' today which upgraded mplayer to mplayer-1.0_pre6-r2. If I hadn't been watching, I wouldn't have seen it, but there was a message that looked like this: !!! ERROR: media-video/mplayer-1.0_pre6-r2 failed. !!! Function src_makarena, Line 1000, Exitcode 555- !!! All your base are belong to us! * APRIL FOOLS! so it looks like the Gentoo devs are having a good time today :D -- Brad -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
It's a good joke: # wget http://www.gentooexperimental.org/nt/distfiles/stages/stage1-latest.tar. bz2 --12:12:35-- http://www.gentooexperimental.org/nt/distfiles/stages/stage1-latest.tar. bz2 => `stage1-latest.tar.bz2' Resolving www.gentooexperimental.org... 213.131.245.105 Connecting to www.gentooexperimental.org[213.131.245.105]:80... connected. HTTP request sent, awaiting response... 404 Not Found 12:12:35 ERROR 404: Not Found. --- Chris Covington IT Plus One Health Management 75 Maiden Lane Suite 801 NY, NY 10038 646-312-6269 http://www.plusoneactive.com -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Bug reporting questions
Dave Nebinger wrote: But before I begin, if something unexpected and interesting happens I won't lose my system will I? Possible, but that's why I preceded the previous message with the NOTE at the top. Still it would be recoverable (might need to work from the live cd). But again you'll have the right solid foundation to build the system from. Ok I'll try to emerge the system/world again. I'll let you know how it goes. Thanks for all the explanations. Leo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
Vineri 01 Aprilie 2005 18:03, A. R. a scris: > http://gentooexperimental.org/nt/ nice one -- Adi -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
Mark Knecht wrote: It's got to be an april fool's joke... Has to be. Why else would it use "NT" and "comercial-grade" in the same paragraph? I understand porting as the process of adapting a piece of useful code so it works in a system it was not initially designed for. OO code should be no easier / difficult to port then modular code. I'm not a programmer but I hear that Object Oriented programming makes it trivial to port anything to anything. I'm not the least bit surprised to hear this... - Mark -- gentoo-user@gentoo.org mailing list Is the part about MS buying the posix interface it true? I can't believe I fell for this even if just for the 5 minutes I though about how useless running linux on the NT kernel would be. Leo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Service named already provided by dns!
Out of curiosity, what would happen if you modified the '/etc/init.d/named' file and commented out the line: provide dns Would that prevent Gentoo from thinking the '/etc/init.d/named' provided the 'dns' service? Just a thought. -Hani -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Bug reporting questions
> OK. > > What does CHOST do? It's the basis for the hosting architecture. By defining it as 686 it (plus the right CFLAGS) is supposed to optimize compiles for your platform. > OK. What does -pipe do? > Gcc will build intermediary files to pass between the internal components (i.e. the preprocessor, compiler, assembler). -pipe causes gcc to instead pass the contents via a pipe and eliminates the need to create and write a file plus open and read on the next tool in the chain. > You're right, didn't have nptl defined... (non posix threads ?) It's still posix threads, but I think the acronym is more like 'next posix thread library' or 'new ...', but I'm not sure. > But before I begin, if something unexpected and interesting happens I > won't lose my system will I? Possible, but that's why I preceded the previous message with the NOTE at the top. Still it would be recoverable (might need to work from the live cd). But again you'll have the right solid foundation to build the system from. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Apr 1, 2005 8:39 AM, Ciaran McCreesh <[EMAIL PROTECTED]> wrote: > On Fri, 01 Apr 2005 22:10:00 +1200 Nick Rout <[EMAIL PROTECTED]> wrote: > | I say again, no other list I am on exhibits this problem, just bloody > | change it back the the way it used to be, right, wrong or debateable > | in technical terms. what is easiest and most convenient for the > | majority of users, and causes the least annoyances, is the "right" > | config > > gentoo-user is the only list where that change was causing problems. > None of the other lists are having problems with it. I wonder why? April Fool's Joke? Because we user's are stupid? ;-) I don't like the change but I can live with it if it must be. (I know that it doesn't have to be except for someone else in power saying so...) Anyway, please forgive me in advance if I send two copies to the list once in awhile. It will happen even if I pay attention. - Mark -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] emerge kde-base/arts doesn't see qt
Le vendredi 01 avril 2005 à 12:21 +0100, Stuart Howard a écrit : > I recently removed arts and then found that mplayer no longer worked > though I am a gnome user. You might hve compiled mplayer with the +arts USE flag. After I added -arts to my use flags, emerge -vauD --newuse world recompiled mplayer. I haven't used it since, but I don't really need it. Fred -- Frédéric Grosshans <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
> >It's got to be an april fool's joke... > Has to be. Why else would it use "NT" and "comercial-grade" in the same > paragraph? Not really. Don't you know that GENTOO == Gee Everyone NT's Object Oriented? I'm not a programmer but I hear that Object Oriented programming makes it trivial to port anything to anything. I'm not the least bit surprised to hear this... - Mark -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] "SOLVED": ALSA 1.0.9-rc2 Kernel oops
On Fri, Apr 01, 2005 at 10:29:06AM -0600, Paul Varner wrote: > > Any inputs? If I didn't do anything stupid, I will go ahead a file a > > bug on bugzilla. > > Your diagnosis is basically correct and you didn't do anything stupid. > > http://bugs.gentoo.org/show_bug.cgi?id=87385 > > Regards, > Paul Whoa! between when I searched earlier this morning, and searching now, the search turned up 30 more results on bugzilla. My first instinct when things like this happen is to search bugzilla, but bizarrely I didn't see anything related to >1.0.8 just 90 minutes ago. Thanks for pointing out the bug. W -- * Address: 45 Spelman Hall, Princeton University 08544 * * Phone: x68958 AIM: AngularJerk* *E-mail: [EMAIL PROTECTED]From: sep.dynalias.net * Rules are meant to be broken. Proof: If there are rules, there are something that must be regulated if the rule is not broken ever, there's no need to externally impose a regulation to control that something Therefore there will be no need for rules. So, the existence of a rule lies in its breakability, as nonbreakable rules are illogical and should not exist. Sortir en Pantoufles: up 37 days, 8:24 -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] apache-1.3.33 with mod_perl and mod_php
Why do I need mod_perl and mod_phop as static modules ? because there are some modules that required as it. For example for mod_perl, I need the HTML-Mason and at a paragraph in the readme file says: "Using Mason with a mod_perl DSO may cause your Apache server to crash silently at startup, or fail intermittently. The fix for this problem is to install Apache/mod_perl with mod_perl compiled statically into the Apache binary. Packages of Apache with a static mod_perl are available around the net." and there are another modules with this requirement so, I write this, because, I found a solution to my problem. And there is how I solved it: #ebuild /path/of/mod_php.ebuild fetch #ebuild /path/of/mod_perl.ebuild fetch #ebuild /path/of/apache-1.3.33.ebuild fetch #ebuild /path/of/mod_php.ebuild unpack #ebuild /path/of/mod_perl.ebuild unpack #ebuild /path/of/apache-1.3.33.ebuild unpack Configure and compile, of course mod_php and mod_perl as static modules for apache (read the install of mod_perl and mod_php) #touch .configure for each work directoy (mod_php, mod_perl and apache) in order to tell portage that mod_php,mod_perl and apache are compiled #ebuild apache install #ebuild apache qmerge and ready. Thanks and I like Gentoo El mié, 30-03-2005 a las 11:58 -0500, A. Khattri escribió: > On Tue, 29 Mar 2005, MOLINA BRAVO FELIPE DE JESUS wrote: > > > But with this form the modules are installed as dinamic ... and static ... > > how??? > > Why do you need static modules? There's no difference in functionality > when using dynamic modules. I would be loathe to make mod_perl static - it > makes the Apache binary much much bigger. > > -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Bug reporting questions
Dave Nebinger wrote: NOTE: Making the changes I suggest below may impact your system (especially by changing the CHOST). If you choose to make them be sure to "emerge --emptytree system" at least and probably the world as well. My make.conf has CHOST="i386-pc-linux-gnu" use CHOST="i686-pc-linux-gnu" OK. What does CHOST do? CFLAGS="-O2 -mcpu=i686 -fomit-frame-pointer" Clearly -mcpu=i686 is depreciated. What -march setting is good? use CFLAGS="-O2 -march=pentium4 -pipe -fomit-frame-pointer" OK. What does -pipe do? The toolchain is the critical part of any unix system; a misconfig on one of the components can crop up in all kinds of weird and funky places at weird and funky times. I'm also going to guess that you do not have the nptl use flag defined in make.conf; if you do not, add the nptl use flag as the nptl threads currently receive more development support than the older threads. With your P4 they will have a better performance profile as well. You're right, didn't have nptl defined... (non posix threads ?) Thanks. I'll emerge --emptytree system and let you know what happens. But before I begin, if something unexpected and interesting happens I won't lose my system will I? Leo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
John Lowell wrote: > I certainly can post ifconfig and will but the netstat -rn is a problem. The command is not available to me with just the basic packages installed. This was a fresh stage1. I'll need to reconfigure /etc/conf.d/net for dhcp service to get the appropriate e-builld. Before I do that, have you any other thoughts or recommendations? Yes I've got a recommendation. Post the ifconfig already. And since you have the ifconfig command I'd suggest posting the netstat -rn immediately after it since it's part of the same package. support root # qpkg -f /sbin/ifconfig sys-apps/net-tools * support root # qpkg -f /bin/netstat sys-apps/net-tools * kashani -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Monthly BugDay reminder!
On Fri, 01 Apr 2005 22:10:00 +1200 Nick Rout <[EMAIL PROTECTED]> wrote: | I say again, no other list I am on exhibits this problem, just bloody | change it back the the way it used to be, right, wrong or debateable | in technical terms. what is easiest and most convenient for the | majority of users, and causes the least annoyances, is the "right" | config gentoo-user is the only list where that change was causing problems. None of the other lists are having problems with it. I wonder why? -- Ciaran McCreesh : Gentoo Developer (Vim, Fluxbox, shell tools) Mail: ciaranm at gentoo.org Web : http://dev.gentoo.org/~ciaranm pgpQTDYCK3fj2.pgp Description: PGP signature
Re: [gentoo-user] Gentoo for the Windows NT Kernel
Dave Nebinger wrote: http://gentooexperimental.org/nt/ Nah! It's got to be an april fool's joke... Has to be. Why else would it use "NT" and "comercial-grade" in the same paragraph? -- Ted Ozolins(VE7TVO) Westbank, B. C -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] used computer
On Fri, 1 Apr 2005, Rod wrote: > Have you tried looking into the company you work for? Connected with T-Mobile -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] ALSA 1.0.9-rc2 Kernel oops
On Fri, 2005-04-01 at 11:13 -0500, Willie Wong wrote: > Last night before going to sleep, I ran an emerge update, which > brought in > alsa-header-1.0.9_rc2 > alsa-lib-1.0.9_rc2 > to replace the respective 1.0.8 versions. > > After downgrading to the 1.0.8 versions, festival no longer causes a > kernel oops. > > My questions: > > 1) Is my diagnostic correct? or is there something else at work > here? (Namely, is the problem really with ALSA? I don't parse > kernel messages well, so I am a little worried about the > "Modules linked in: nvidia" line. Is it just to inform me, in > case anything bad happened, that "this is your system setup"? Or > does it actually say: nvidia culpa? > 2) Did I do something really stupid in emerging alsa-lib-1.0.9_rc2? > I don't recall there being any post-alsa-emerging procedures that > I need to follow, especially not any that would cause a kernel > oops. I am wondering if there's something like "fix-libtool.sh", > a command that ought to be run after updating alsa which I didn't > run and might cause the problem. > > Any inputs? If I didn't do anything stupid, I will go ahead a file a > bug on bugzilla. Your diagnosis is basically correct and you didn't do anything stupid. http://bugs.gentoo.org/show_bug.cgi?id=87385 Regards, Paul -- Paul Varner <[EMAIL PROTECTED]> -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
- Original Message - From: "Kashani" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, April 01, 2005 7:58 AM Subject: Re: [gentoo-user] Host, Schmost! > John Lowell wrote: > > Thanks for writing. > > > > Broadcast with 0 is default in /etc/conf.d/net. I've tried it both ways with > > no difference being made. > > > > Why don't we clear this up and have you post your ifconfig and netstat -rn > > kashani > -- > gentoo-user@gentoo.org mailing list > > Hi Kashani, I certainly can post ifconfig and will but the netstat -rn is a problem. The command is not available to me with just the basic packages installed. This was a fresh stage1. I'll need to reconfigure /etc/conf.d/net for dhcp service to get the appropriate e-builld. Before I do that, have you any other thoughts or recommendations? jlowell -- gentoo-user@gentoo.org mailing list
[gentoo-user] ALSA 1.0.9-rc2 Kernel oops
Okay, to begin, I am not quite sure if ALSA is the problem. I just guessed that it is. I woke up this morning and my computer failed to greet me (festival + xscreensaver-command). roottail shows: :/var/log/critical/current Apr 1 02:06:32 [kernel] Unable to handle kernel NULL pointer dereference at virtual address Apr 1 02:06:33 [kernel] printing eip: Apr 1 02:06:33 [kernel] *pde = Apr 1 02:06:33 [kernel] Oops: 0002 [#1] ---snip--- Apr 1 10:21:34 [kernel] printing eip: Apr 1 10:21:34 [kernel] *pde = Apr 1 10:21:34 [kernel] Oops: 0002 [#7] Apr 1 10:21:34 [kernel] printing eip: Apr 1 10:21:34 [kernel] *pde = Apr 1 10:21:34 [kernel] Oops: 0002 [#8] And :/var/log/kernel/current Apr 1 10:21:34 [kernel] printing eip: Apr 1 10:21:34 [kernel] c022c462 Apr 1 10:21:34 [kernel] *pde = Apr 1 10:21:34 [kernel] Oops: 0002 [#8] Apr 1 10:21:34 [kernel] PREEMPT SMP Apr 1 10:21:34 [kernel] Modules linked in: nvidia Apr 1 10:21:34 [kernel] CPU:0 Apr 1 10:21:34 [kernel] EIP:0060:[]Tainted: P VLI Apr 1 10:21:34 [kernel] EFLAGS: 00010202 (2.6.10-rc2) Apr 1 10:21:34 [kernel] EIP is at memcpy+0x1e/0x39 Apr 1 10:21:34 [kernel] eax: 0010 ebx: dd6b6500 ecx: 0004 edx: Apr 1 10:21:34 [kernel] esi: c0aabf0c edi: ebp: bfffe670 esp: c0aabed8 Apr 1 10:21:34 [kernel] ds: 007b es: 007b ss: 0068 Apr 1 10:21:34 [kernel] Process audsp (pid: 20929, threadinfo=c0aab000 task=d1874020) Apr 1 10:21:34 [kernel] Stack: c0aabf1c dfcf80e4 c0aabf1c c02fb9e4 c0aabf0c 0010 dd6b6500 Apr 1 10:21:34 [kernel]c02fc744 dd6b6500 c0aabf0c 0050 ffea 0006 Apr 1 10:21:34 [kernel] 0005 0001 8002 Apr 1 10:21:34 [kernel] Call Trace: Apr 1 10:21:34 [kernel] [] snd_timer_user_append_to_tqueue+0x40/0x49 Apr 1 10:21:34 [kernel] [] snd_timer_user_params+0x1bc/0x229 Apr 1 10:21:34 [kernel] [] snd_timer_user_ioctl+0x1a3/0x204 Apr 1 10:21:34 [kernel] [] sys_ioctl+0x160/0x219 Apr 1 10:21:34 [kernel] [] sysenter_past_esp+0x52/0x71 Apr 1 10:21:34 [kernel] Code: fd 31 c0 c3 31 d2 b8 f2 ff ff ff c3 90 83 ec 0c 8b 44 24 18 8b 54 24 10 89 74 24 04 89 c1 89 7c 24 08 8b 74 24 14 c1 e9 02 89 d7 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 89 d0 8b 74 24 04 8b 7c The only processes that I can think of that starts at 10:21:34 would be stuff related to me unlocking xscreensaver, and it involves a perl script that I wrote to monitor xscreensaver and output to festival, so my computer would speak to me when I wake up. Last night before going to sleep, I ran an emerge update, which brought in alsa-header-1.0.9_rc2 alsa-lib-1.0.9_rc2 to replace the respective 1.0.8 versions. After downgrading to the 1.0.8 versions, festival no longer causes a kernel oops. My questions: 1) Is my diagnostic correct? or is there something else at work here? (Namely, is the problem really with ALSA? I don't parse kernel messages well, so I am a little worried about the "Modules linked in: nvidia" line. Is it just to inform me, in case anything bad happened, that "this is your system setup"? Or does it actually say: nvidia culpa? 2) Did I do something really stupid in emerging alsa-lib-1.0.9_rc2? I don't recall there being any post-alsa-emerging procedures that I need to follow, especially not any that would cause a kernel oops. I am wondering if there's something like "fix-libtool.sh", a command that ought to be run after updating alsa which I didn't run and might cause the problem. Any inputs? If I didn't do anything stupid, I will go ahead a file a bug on bugzilla. Thanks, W -- * Address: 45 Spelman Hall, Princeton University 08544 * * Phone: x68958 AIM: AngularJerk* *E-mail: [EMAIL PROTECTED]From: sep.dynalias.net * "Prostetnic Vogon Jeltz smiled very slowly. This was done not so much for effect as because he was trying to remember the sequence of muscle movements. " Sortir en Pantoufles: up 37 days, 7:25 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg-x11: truetype-fonts vs. type1-fonts
Depends on if you need some font(s) that are only in the M$ list. & quality depends mostly on size & capabilities of the intended output device... rgh Grant wrote: Nope, Type1 are high quality fonts from Adobe. Truetype are fonts introduced by M$. They are of lower quality. Frank Is it beneficial to build both of them into an xorg installation or is that a waste? - Grant On Wed, 2005-03-30 at 13:32 -0800, Grant wrote: Are the USE flags 'truetype-fonts' and 'type1-fonts' in xorg-x11 meant to be substitutes for each other? I'm running the xfs font server, and I know I'm supposed to keep my installed fonts down to those I want. - Grant -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Can't complete the install!
Nick, IPv6, huh? Hmmm Any way to tell it v4? Local servers -- I did that, right under the 'stage 3' banner, and several are known to me as v4 capable; used themseveral times. emerge-webrsync when it finishes says to now proceed with emerge --sync. Given that I really, really wanted to do stage-1 & lots of custom/performance changes soon to get the best out of my system, don't I still need to do this?, Probably with --world or something? Thank You!, rgh. Nick Rout wrote: To cut a long story short it looks like the notorious ipv6 problem - wherein mirrorselect choses ipv6 mirrors (because ipv6 is enabled on the boot cd) but your chroot does not use ipv6. Find a mirror near you and put it in /etc/make.conf manually (within the chroot), the mirror list is easy to find off the main gentoo.org page. If that doesn't work use emerge-webrsync - once you have done that you have enough to complete the install, you don't need to emerge --sync after emerge-webrsync. On Thu, 2005-03-31 at 21:49 -0500, Robert G. Hays wrote: Gentoo universal CD + packages CD, 2004.3 By-the-book, literally -- I printed it and punched it into binder ! Note that I am typing & sending this in Windows, thus some data may be off a *little*, since Gentoo doesn't work. - stage 1 install : - Tried mirrorselect -a & -i, both: with & without -bX emerge --sync only finds raven, raptor, heron, hawk, crane, & cockatoo servers, no matter what. First server hit in a given run gets to about app-admin/?/io.c, at which point it gives code 30 at line 109 & code 12 at line 189 and times out, follow-on servers give nothing except list-of-files. emerge-webrsync finds one server, I forget which. Says no md5's available at all, and quits. - stage 3 install : - same, even after I 'select with -o -i & -b10, picking ~12 *new* servers & retrying ~11 times. (Yes I mean that 'emerge --sync' hits the same 6 servers, or rather 4 of them per run, ignoring the servers I selected, or, retrying 11 times, -a -s12, recycles through same old 6.) emerge-webrsync finally found a server *I* told it to find, apparently worked, but... emerge --sync performed per previous paragraph, except different files fetched, still the "io.c" errors above. ... Rebooted to hdisk. Still can't get anything else, except one-at-a-time, and that has trouble. Can compile bzImage, can NOT compile modules without crash; seg-fault in various files, kernel panic in others. (SuSE 9.0 on target drive for ~10 months can compile anything, far more in a row than required to crash Gentoo-compiles, but oldconfig-bzImage does not match booted kernel, thus I will NOT patch-&c. Otherwise, SuSE runs fine, always, no matter what the load.) And yes I dotted all the 'i's that I know of, in all above; 20+ years programming and everything else; I *do* know how to RTFM & *follow* it. - Hardware &c..: - Shuttle AN35N 400 Ultra+MCP mobo w/nVidia nForce2 chip ~6 months old. Never gets over ~45c. AMD XP 2700+, never gets over 51C, and that only once -- otherwise never over 47c. NO over-/under- -clock/-voltage. 1GB Centon RAM, as 512+256+256. www.simmtester.com for 12 hours no errors, repeatedly. Maxtor 30G hda. (Testing hd; will only fornicate with 'real' 120G when all works RIGHT.) ATI All-In-Wonder 9600 video 128MB, AGP8 Sound Blaster Live Value PCI 3Com '3c59x' NIC, PCI On-board Realtek sound & nic both turned off. All BIOS parms set for precisely what I have. Precisely. - Netgear RP114 (updated) router between nic & Westell modem to phone-co (bellsouth) DSL 1.5m/256k. - Drive-parts: 1) 512M dos 2) 200M linux boot 3) ~5.5G Win98/f32 4) (extended) 5) 1G unused limux (all-in-one) 6) 15M hidden dos 7) 15M dos 8) ~1G f32 9) ~1G f32 10) 1G swap 11) linux /, to end of drive; ~~20G. grub in 2). - Partitions & router are NOT negotiable! I NEED correct ATI drivers to get *ALL* functionality avail on video card. I NEED Win4Lin (for W98se under linux to solve native-mode issues). I intend other things, but these two are NOT negotiable, or else I'll just have to keep running Wunnerful-Hic!-Winders98SE-HIC!!. **POSSIBLE** that the 30G hd is bad, but I doubt, rest of machine is as solid as a planet. Why crashes & ignoring selected servers? PLEASE help! Thank you, Robert G. Hays -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
On Fri, 1 Apr 2005 10:04:34 -0800, John Lowell wrote: > Terribly sorry, Neil. I'll make absolutely sure next time to check with > you first before reinstalling, I promise. What's your problem? I only asked a question. There's no reason to get sarcy, even less reason to do it twice. -- Neil Bothwick Forgive your enemies. But hit them a few times first. pgp7WDq2y0LZI.pgp Description: PGP signature
Re: [gentoo-user] Host, Schmost!
John Lowell wrote: > Thanks for writing. Broadcast with 0 is default in /etc/conf.d/net. I've tried it both ways with no difference being made. Why don't we clear this up and have you post your ifconfig and netstat -rn kashani -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] openldap question (non-ssl => ssl)
> There is the file in /etc/conf.d/slapd. > # conf.d file for the openldap-2.1 series > # > # To enable both the standard unciphered server and the ssl encrypted > # one uncomment this line or set any other server starting options > # you may desire. > # > # OPTS="-h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'" FIXED: Thanks, I had deleted the ldap:// option at some point. After replacing it and restarting the service, I'm good to go. # nmap localhost | grep ldap 389/tcp open ldap 636/tcp open ldapssl Thanks also for the security concerns. It's my next order of business after migrating user accounts. -- Travis -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Service named already provided by dns!
On Fri, 1 Apr 2005 13:45:16 +0400, Andrew Gaydenko wrote: > I see, I can remove/backup this file. The problem is I don't understand > why the /etc/init.d/named file (more strictly, the fact, this service > provides 'dns') is taken into account when the service is _not_ added to > one of runlevel scrips. Because you have two services providing dns available. Imagine if neither of them was in a run level bit something else was that had a dependency on dns, which one would it start? -- Neil Bothwick Planet 98% full! Delete Windows users? (Y/y) pgpSbYgU93a5r.pgp Description: PGP signature
Re: [gentoo-user] E-Builds for DVD Software
On Mar 31, 2005 4:22 AM, Ralph Slooten <[EMAIL PROTECTED]> wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Matthias F. Brandstetter wrote: > > Hi, can you make backup copies of copy protected DVDs with dvdrip? > > Of course, including menu and resizing to a single layer DVD, as some > > windows programs can do? > > Although I don't know the answer to that, however I did get DVDshrink to > work well with wine > (http://axljab.homelinux.org/DVD_to_DVD_-_DVDshrink). The ripping to ISO > takes a while though (about 1:1 for the film with my 800MHz), however > it's almost all automatic... and results are great, and all extras > (menus/audio tracks etc) are avaliable. Easy to use too. Protection can > be removed too. > > The resulting ISO is burned with growisofs to DVD. > > Greetings > Ralph > > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.0 (MingW32) > > iD8DBQFCS91vAWKxH5yWMT8RAnQxAKDHPtFMWGgF9J16i2kj6xXG2ANVqACfZzwW > uWVaJrYJ2onnWTC4+edZlWs= > =sPye > -END PGP SIGNATURE- > > -- > gentoo-user@gentoo.org mailing list > > I've used 'lxdvdrip' to make backup copies of various DVD's. lxdvdrip is basically a front end to apps such as dvdauthor, dvdbackup, transcode, etc. ... It will take a dual-layer DVD and shrink it to a single-layer (or make a straight dvdbackup of a single-layer DVD). However, I have noticed some irregularities with it. On one DVD player, the movie starts automatically and I can't get to the menu unless I fast-forward to the end of the movie. On another DVD player, the menu comes up just fine. YMMV. HTH, -Hani -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xorg-x11: truetype-fonts vs. type1-fonts
> Nope, Type1 are high quality fonts from Adobe. Truetype are fonts > introduced by M$. They are of lower quality. > > Frank Is it beneficial to build both of them into an xorg installation or is that a waste? - Grant > On Wed, 2005-03-30 at 13:32 -0800, Grant wrote: > > Are the USE flags 'truetype-fonts' and 'type1-fonts' in xorg-x11 meant > > to be substitutes for each other? I'm running the xfs font server, > > and I know I'm supposed to keep my installed fonts down to those I > > want. > > > > - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
I have to admit, it had me going for just a little while... On Apr 1, 2005 8:05 AM, Leo <[EMAIL PROTECTED]> wrote: > A. R. wrote: > > > http://gentooexperimental.org/nt/ > > > > > > > >Nah! > >-- > > > > > > > ditto! > -- > gentoo-user@gentoo.org mailing list > > -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Gentoo for the Windows NT Kernel
> http://gentooexperimental.org/nt/ > > Nah! It's got to be an april fool's joke... -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Bug reporting questions
NOTE: Making the changes I suggest below may impact your system (especially by changing the CHOST). If you choose to make them be sure to "emerge --emptytree system" at least and probably the world as well. > My make.conf has > CHOST="i386-pc-linux-gnu" use CHOST="i686-pc-linux-gnu" > CFLAGS="-O2 -mcpu=i686 -fomit-frame-pointer" > > Clearly -mcpu=i686 is depreciated. What -march setting is good? > use CFLAGS="-O2 -march=pentium4 -pipe -fomit-frame-pointer" > How does -fomit-frame-pointer effect the compilations? It removes the frame pointer from the execution stack. As one method calls another, a frame pointer would normally be put on the stack to assist in debugging. However, it uses space that is not normally needed for a production build, which is why it is omitted. > I don't put -O[3-6] because I read that gcc doesn't always define such > optimizations it falls back to -O2. Also, I don' t know if any of the > higher optimizations are experimental or not. Stick with -O2 as it is the safest bet. > I've emerged glibc about 4 times already. I remember a similar error > occured a while ago but was fixed by a subsequent release. The toolchain is the critical part of any unix system; a misconfig on one of the components can crop up in all kinds of weird and funky places at weird and funky times. I'm also going to guess that you do not have the nptl use flag defined in make.conf; if you do not, add the nptl use flag as the nptl threads currently receive more development support than the older threads. With your P4 they will have a better performance profile as well. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
Uwe Thiem wrote: > On Friday 01 April 2005 13:03, John Lowell wrote: >> I just completed a stage1 install from the minimal 2005.0 livecd on >> a box that will be used as a web server. I boot without incident, >> run ifconfig and get a perfectly suitable response, can ping my >> router successfully but, attempting to reach the web, get unknown >> host errors. >> >> The setup here is almost trite: Three workstations with dynamic >> addresses behind an ADSL router/switch which doubles as a dhcp >> server, and the webserver mentioned earlier with a static address >> outside the range authorized for dynamic service and with port 80 >> forwarded. I have /etc/conf.d/net with iface_eth0="192,168.1.44 >> Broadcast 192.168.0.255 NetMask 255.255.255.0" and gateway enabled >> at 192.168.1.1. /etc/resolv.conf shows proper nameserver numbers. > > Your broadcast is wrong. Should be 192.168.1.255. > > Uwe > > -- > 95% of all programmers rate themselves among the top 5% of all > software developers. - Linus Torvalds > > http://www.uwix.iway.na (last updated: 20.06.2004) Uwe, Thanks for writing. Broadcast with 0 is default in /etc/conf.d/net. I've tried it both ways with no difference being made. Regards. jlowell -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
Jason Stubbs wrote: > On Friday 01 April 2005 20:03, John Lowell wrote: >> I just completed a stage1 install from the minimal 2005.0 livecd on >> a box that will be used as a web server. I boot without incident, >> run ifconfig and get a perfectly suitable response, can ping my >> router successfully but, attempting to reach the web, get unknown >> host errors. >> >> The setup here is almost trite: Three workstations with dynamic >> addresses behind an ADSL router/switch which doubles as a dhcp >> server, and the webserver mentioned earlier with a static address >> outside the range authorized for dynamic service and with port 80 >> forwarded. I have /etc/conf.d/net with iface_eth0="192,168.1.44 >> Broadcast 192.168.0.255 NetMask 255.255.255.0" and gateway enabled >> at 192.168.1.1. /etc/resolv.conf shows proper nameserver numbers. > > Your broadcast address is wrong there. You also have a comma between > 192 and 168. Not sure if the capitalization matters either. > >> I don't get it. The workstations all reach the web without >> difficulty. But the webserver, nothing but unknown host errors. This >> same machine was working just fine before the latest install with >> the very same configuration. Some help please. > > `route -n` output on the box makes sense? > > Regards, > Jason Stubbs Hi Jason, Thanks for the reply. Interesting point about the 0 vs. a 1 in broadcast. I, too, thought that changing to 1 might make a difference but it doesn't. The 0 is default for /etc/conf.d/net, of course, and I've never understood why it's set that way in Gentoo. The comma is a typo and the caps the result of transcribing by hand to the mail message. Will I have access to the route command? This is a fresh install with, so far, only system packages. Again, thanks for your reply. jlowell -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo for the Windows NT Kernel
A. R. wrote: http://gentooexperimental.org/nt/ Nah! -- ditto! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Bug reporting questions
Jason Stubbs wrote: On Friday 01 April 2005 22:49, Leo wrote: Hi. I'm getting an error with sys-libs/glibc-2.3.4.20050125-r1: loadmsgcat.c: In function `_nl_init_domain_conv': ../sysdeps/i386/bits/string.h:655: error: can't find a register in class `GENERAL_REGS' while reloading `asm' make[2]: *** [/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux- gnu-linuxthreads/intl/loadmsgcat.os] Error 1 These lines contain all the information necessary. The first error that occurred, what file it occurred in and what directory that file is in. The rest of the information will sometimes help but it is quite rare in my experience. I define $ARCH='~x86' Are you sure you don't mean ACCEPT_KEYWORDS? You should not be touching the ARCH variable at all. If you are, it could quite realistically be causing your issue. Yes! ACCEPT_KEYWORDS in fact. oops I didn't touch the ARCH var at all. What product do I select when reporting this bug on Gentoo bugzilla? Should I just send an email directly to the glibc maintainer? You should just follow what it tells you, ie "Gentoo Linux". Regards, Jason Stubbs -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Bug reporting questions
Dave Nebinger wrote: I'm getting an error with sys-libs/glibc-2.3.4.20050125-r1: [snipped] You should not do either of these things. First you should fix your CFLAGS to remove the -mcpu flag and replace with the appropriate -march value. OK what do you suggest as an appropriate -mach value? Some time ago I started getting this warning. Secondly, since you're using -mcpu=686 yet gcc appears to be i386 based, I would guess that your system setup from the ground up is poorly set up. I set up the system from Gentoo ver 2004.2 At the time I chose what the documentation recommended as reasonable defaults. I am not familiar with what these flags really do for gcc. I understand that certain optimizations for 686 exist that make incompatible binaries for earlier processors ie i586. My make.conf has CHOST="i386-pc-linux-gnu" I don't know if gcc depends on any specific part of this value. AFAIK it's simply a name (handle). Maybe so you can have several versions of gcc around and chose which one you want to use? If you're still in the early stages of the system build, I'd suggest starting over with valid CFLAGS; trust me, having a solid foundation ensures that you'll end up with a stable gentoo box when you're done. Yeah I though that I might have to tweak my CFLAGS... I was never sure if it was optimized or not. Right now I use CFLAGS="-O2 -mcpu=i686 -fomit-frame-pointer" Clearly -mcpu=i686 is depreciated. What -march setting is good? How does -fomit-frame-pointer effect the compilations? I don't put -O[3-6] because I read that gcc doesn't always define such optimizations it falls back to -O2. Also, I don' t know if any of the higher optimizations are experimental or not. Anyway what do you suggest? I have a vanilla P4 Willemite... If the system has been operational for awhile, then I think you should count yourself lucky, not emerge the glibc update, and keep your misconfigured box running as it is. I've emerged glibc about 4 times already. I remember a similar error occured a while ago but was fixed by a subsequent release. TNX for your attention Leo -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
Nick Rout wrote: > On Fri, 2005-04-01 at 03:03 -0800, John Lowell wrote: >> I just completed a stage1 install from the minimal 2005.0 livecd on a >> box that will be used as a web server. I boot without incident, run >> ifconfig and get a perfectly suitable response, can ping my router >> successfully but, attempting to reach the web, get unknown host >> errors. >> >> The setup here is almost trite: Three workstations with dynamic >> addresses behind an ADSL router/switch which doubles as a dhcp >> server, and the webserver mentioned earlier with a static address >> outside the range authorized for dynamic service and with port 80 >> forwarded. I have /etc/conf.d/net with iface_eth0="192,168.1.44 >> Broadcast 192.168.0.255 NetMask 255.255.255.0" and gateway enabled at >> 192.168.1.1. /etc/resolv.conf shows proper nameserver numbers. >> >> I don't get it. The workstations all reach the web without >> difficulty. But the webserver, nothing but unknown host errors. This >> same machine was working just fine before the latest install with >> the very same configuration. Some help please. > > sounds like s dns problem. > > on the webserver what does /etc/resolv.conf say? I should include some > nameserver lines. > > dhcp sets the nameserver lines in /etc/resolv.conf, a manula setup > does not. I suspect thats the problem. copy the nameserver lines from > one of the dhcp workstations. > > If that doesn't fix it try pinging an ip address on the net by number, > eg ping 123.123.123.123 and let us know the results. > >> >> jlowell > -- > Nick Rout <[EMAIL PROTECTED]> Hi Nick, Thanks for the reply. The DNS entries were, in fact, entered during installation via dhcp, which is the way the livecd read my network. Checking /etc/resolv.conf, the nameserver entries there are perfectly correct for this machine. Unless the style used to enter them needs to be revised in some way, which I would doubt, they're fine. I"d tried your suggestion of pinging by number rather than address and it doesn't make any difference. Again thanks for your reply. jlowell jlowell . -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Host, Schmost!
Neil, Terribly sorry, Neil. I'll make absolutely sure next time to check with you first before reinstalling, I promise. jlowell - Original Message - From: "Neil Bothwick" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, April 01, 2005 2:43 AM Subject: Re: [gentoo-user] Host, Schmost! -- gentoo-user@gentoo.org mailing list
[gentoo-user] Gentoo for the Windows NT Kernel
http://gentooexperimental.org/nt/ Nah! -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Won't emerge -uDvp world
Thanks everyone for the info! Michael Turcotte Information Systems City of North Bay 200 McIntyre St. E PO Box 360 North Bay, Ontario P1B 8H8 [EMAIL PROTECTED] http://www.cityofnorthbay.ca > -Original Message- > From: Jason Stubbs [mailto:[EMAIL PROTECTED] > Sent: Friday, April 01, 2005 9:36 AM > To: [EMAIL PROTECTED] > Subject: Re: [gentoo-user] Won't emerge -uDvp world > > On Friday 01 April 2005 23:02, Mike Turcotte wrote: > > Hello I am trying to upgrade my file server that was built a half to > three > > quarters of a year ago using Gentoo 2004.2 GRP. I know this is really > old > > and probably insecure, but it is used mainly for file sharing internally > on > > my network. Anyways, I emerge synced, which went fine, but when I try to > > pretend to emerge -uDvp world to see what it's going to install, I get > the > > error about missing /etc/make.profile and check symlink. What does this > > mean and what can I do about it? Are those the emerge options I should > be > > using for this? > > Okay. You've hit a bug in portage, which you'll side-step, and then have > to > side-step another bug in order to get you back to a supported profile. > Assuming that you do in fact have an /etc/make.profile symlink, first > create > an empty make.defaults under it: > > # touch /etc/make.profile/make.defaults > > Then upgrade portage to the latest, which should be 2.0.51.19. You'll get > a > depracation notice telling you to upgrade your profile. Ignore it. So, > that's > just: > > # emerge portage > > Once that's done, then you can follow whatever the steps shown were to > upgrade > your profile. After that's done, you should be back in business again. > > Regards, > Jason Stubbs > -- > gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] gentoo-dev-sources being moved into gentoo-sources has occurred
William Kenworthy wrote: Just did an emerge sync and see the long awaited change of gentoo-dev-sources being moved into gentoo-sources has occurred. However, kernel.org shows 2.6.12-rc1 is out and no ~x86 version of this is evident. Does the next gentoo-sources kernel get worked on in another category (as used to happen in the distant past), or is gentoo-sources where its at? We do not produce -rc releases for gentoo-sources - we only provide patches on top of the stable kernel. If you want a (clean) -rc kernel then you want to look at vanilla-sources. Note that this is no different from how gentoo-dev-sources did it. Daniel -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Bug reporting questions
On Friday 01 April 2005 22:49, Leo wrote: > Hi. > > I'm getting an error with sys-libs/glibc-2.3.4.20050125-r1: > > loadmsgcat.c: In function `_nl_init_domain_conv': > ../sysdeps/i386/bits/string.h:655: error: can't find a register in class > `GENERAL_REGS' while reloading `asm' > make[2]: *** > [/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux- >gnu-linuxthreads/intl/loadmsgcat.os] Error 1 These lines contain all the information necessary. The first error that occurred, what file it occurred in and what directory that file is in. The rest of the information will sometimes help but it is quite rare in my experience. > I define > $ARCH='~x86' Are you sure you don't mean ACCEPT_KEYWORDS? You should not be touching the ARCH variable at all. If you are, it could quite realistically be causing your issue. > What product do I select when reporting this bug on Gentoo bugzilla? > Should I just send an email directly to the glibc maintainer? You should just follow what it tells you, ie "Gentoo Linux". Regards, Jason Stubbs -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Won't emerge -uDvp world
On Friday 01 April 2005 23:02, Mike Turcotte wrote: > Hello I am trying to upgrade my file server that was built a half to three > quarters of a year ago using Gentoo 2004.2 GRP. I know this is really old > and probably insecure, but it is used mainly for file sharing internally on > my network. Anyways, I emerge synced, which went fine, but when I try to > pretend to emerge -uDvp world to see what it's going to install, I get the > error about missing /etc/make.profile and check symlink. What does this > mean and what can I do about it? Are those the emerge options I should be > using for this? Okay. You've hit a bug in portage, which you'll side-step, and then have to side-step another bug in order to get you back to a supported profile. Assuming that you do in fact have an /etc/make.profile symlink, first create an empty make.defaults under it: # touch /etc/make.profile/make.defaults Then upgrade portage to the latest, which should be 2.0.51.19. You'll get a depracation notice telling you to upgrade your profile. Ignore it. So, that's just: # emerge portage Once that's done, then you can follow whatever the steps shown were to upgrade your profile. After that's done, you should be back in business again. Regards, Jason Stubbs -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Won't emerge -uDvp world
> Anyways, I emerge synced, which went fine, but when I try > to pretend to emerge -uDvp world to see what it's going to install, I get > the error about missing /etc/make.profile and check symlink. What does > this mean and what can I do about it? Are those the emerge options I > should be using for this? Possibly your /etc/make.profile is invalid, quite possibly because the emerge --sync process removed the older profiles. Re-create the link to a valid profile from /usr/portage/profiles. I've included my link for your reference... winux root # ls -l /etc/make.profile lrwxrwxrwx 1 root root 48 Jan 28 19:45 /etc/make.profile -> ../usr/portage/profiles/default-linux/x86/2004.3 -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Bug reporting questions
> I'm getting an error with sys-libs/glibc-2.3.4.20050125-r1: > > #ifdef ERROR_MESS > > i386-pc-linux-gnu-gcc localealias.c -c -std=gnu99 -O2 -Wall -Winline > -Wstrict-prototypes -Wwrite-strings -mcpu=i686 > -mpreferred-stack-boundary=2 -fPIC -g0 -O99 -fomit-frame-pointer > -D__USE_STRING_INLINES -I../include -I. > -I/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc- > linux-gnu-linuxthreads/intl > -I.. -I../libio > -I/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc- > linux-gnu-linuxthreads > -I../sysdeps/i386/elf -I../linuxthreads/sysdeps/unix/sysv/linux/i386 > -I../linuxthreads/sysdeps/unix/sysv/linux > -I../linuxthreads/sysdeps/pthread -I../sysdeps/pthread > -I../linuxthreads/sysdeps/unix/sysv -I../linuxthreads/sysdeps/unix > -I../linuxthreads/sysdeps/i386 -I../libidn/sysdeps/unix > -I../sysdeps/unix/sysv/linux/i386 -I../sysdeps/unix/sysv/linux > -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman > -I../sysdeps/unix/inet -I../sysdeps/unix/sysv/i386 > -I../sysdeps/unix/sysv -I../sysdeps/unix/i386 -I../sysdeps/unix > -I../sysdeps/posix -I../sysdeps/i386/fpu -I../sysdeps/i386 > -I../sysdeps/wordsize-32 -I../sysdeps/ieee754/ldbl-96 > -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 > -I../sysdeps/ieee754 -I../sysdeps/generic/elf > -I../sysdeps/generic-nostdinc -isystem > /usr/lib/gcc/i386-pc-linux-gnu/3.4.3-20050110/include -isystem > /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC > -DSHARED -D'LOCALEDIR="/usr/share/locale"' > -D'LOCALE_ALIAS_PATH="/usr/share/locale"' -o > /var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux- > gnu-linuxthreads/intl/localealias.os > -MD -MP -MF > /var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux- > gnu-linuxthreads/intl/localealias.os.dt > -MT > /var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux- > gnu-linuxthreads/intl/localealias.os > `-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead. > loadmsgcat.c: In function `_nl_init_domain_conv': > ../sysdeps/i386/bits/string.h:655: error: can't find a register in class > `GENERAL_REGS' while reloading `asm' > make[2]: *** > [/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc- > linux-gnu-linuxthreads/intl/loadmsgcat.os] > Error 1 > make[2]: *** Waiting for unfinished jobs > make[2]: Leaving directory > `/var/tmp/portage/glibc-2.3.4.20050125-r1/work/glibc-2.3.4/intl' > make[1]: *** [intl/subdir_lib] Error 2 > make[1]: Leaving directory > `/var/tmp/portage/glibc-2.3.4.20050125-r1/work/glibc-2.3.4' > make: *** [all] Error 2 > > !!! ERROR: sys-libs/glibc-2.3.4.20050125-r1 failed. > !!! Function toolchain-glibc_src_compile, Line 237, Exitcode 2 > > #endif > > I define > $ARCH='~x86' > > What product do I select when reporting this bug on Gentoo bugzilla? > Should I just send an email directly to the glibc maintainer? You should not do either of these things. First you should fix your CFLAGS to remove the -mcpu flag and replace with the appropriate -march value. Secondly, since you're using -mcpu=686 yet gcc appears to be i386 based, I would guess that your system setup from the ground up is poorly set up. If you're still in the early stages of the system build, I'd suggest starting over with valid CFLAGS; trust me, having a solid foundation ensures that you'll end up with a stable gentoo box when you're done. If the system has been operational for awhile, then I think you should count yourself lucky, not emerge the glibc update, and keep your misconfigured box running as it is. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Won't emerge -uDvp world
On Apr 1, 2005 9:02 AM, Mike Turcotte <[EMAIL PROTECTED]> wrote: > Hello I am trying to upgrade my file server that was built a half to three > quarters of a year ago using Gentoo 2004.2 GRP. I know this is really old and > probably insecure, but it is used mainly for file sharing internally on my > network. Anyways, I emerge synced, which went fine, but when I try to pretend > to emerge -uDvp world to see what it's going to install, I get the error > about missing /etc/make.profile and check symlink. What does this mean and > what can I do about it? Are those the emerge options I should be using for > this? > > Thanks in advance > > Michael Turcotte > Information Systems > City of North Bay > 200 McIntyre St. E > PO Box 360 > North Bay, Ontario > P1B 8H8 > > [EMAIL PROTECTED] > http://www.cityofnorthbay.ca > > -- > gentoo-user@gentoo.org mailing list > > What you need to do is check out the Gentoo upgrade guide. The newest profile is 2005.0. Check out the guide at http://www.gentoo.org/doc/en/gentoo-upgrading.xml -- Brad -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT: cron and top
On Apr 1, 2005 3:15 AM, Frank Schafer <[EMAIL PROTECTED]> wrote: > Hi, > > if I remember right the ``-n 1'' means, that top should do one snapshot > and exit. Due to my experiences, the first snapshots are "liars", thus > this solution donesn't deliver much useable results. For machines where > this is valuable (not desktops) I use to setup ``sar'', the System > Activity Reporter. It is in the sysstat package. > > 0.02$ > Frank Thanks for the info. I did know about sar, I was just lazy and looking for a quick and dirty way to monitor this system. If the "-n 1" option to top is unreliable, then I will definately look into getting sar going instead. Thanks for everyone's help. Matt -- gentoo-user@gentoo.org mailing list
[gentoo-user] Won't emerge -uDvp world
Hello I am trying to upgrade my file server that was built a half to three quarters of a year ago using Gentoo 2004.2 GRP. I know this is really old and probably insecure, but it is used mainly for file sharing internally on my network. Anyways, I emerge synced, which went fine, but when I try to pretend to emerge -uDvp world to see what it's going to install, I get the error about missing /etc/make.profile and check symlink. What does this mean and what can I do about it? Are those the emerge options I should be using for this? Thanks in advance Michael Turcotte Information Systems City of North Bay 200 McIntyre St. E PO Box 360 North Bay, Ontario P1B 8H8 [EMAIL PROTECTED] http://www.cityofnorthbay.ca -- gentoo-user@gentoo.org mailing list
[gentoo-user] Bug reporting questions
Hi. I'm getting an error with sys-libs/glibc-2.3.4.20050125-r1: #ifdef ERROR_MESS i386-pc-linux-gnu-gcc localealias.c -c -std=gnu99 -O2 -Wall -Winline -Wstrict-prototypes -Wwrite-strings -mcpu=i686 -mpreferred-stack-boundary=2 -fPIC -g0 -O99 -fomit-frame-pointer -D__USE_STRING_INLINES -I../include -I. -I/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux-gnu-linuxthreads/intl -I.. -I../libio -I/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux-gnu-linuxthreads -I../sysdeps/i386/elf -I../linuxthreads/sysdeps/unix/sysv/linux/i386 -I../linuxthreads/sysdeps/unix/sysv/linux -I../linuxthreads/sysdeps/pthread -I../sysdeps/pthread -I../linuxthreads/sysdeps/unix/sysv -I../linuxthreads/sysdeps/unix -I../linuxthreads/sysdeps/i386 -I../libidn/sysdeps/unix -I../sysdeps/unix/sysv/linux/i386 -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../sysdeps/unix/sysv/i386 -I../sysdeps/unix/sysv -I../sysdeps/unix/i386 -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/i386/fpu -I../sysdeps/i386 -I../sysdeps/wordsize-32 -I../sysdeps/ieee754/ldbl-96 -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic-nostdinc -isystem /usr/lib/gcc/i386-pc-linux-gnu/3.4.3-20050110/include -isystem /usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DPIC -DSHARED -D'LOCALEDIR="/usr/share/locale"' -D'LOCALE_ALIAS_PATH="/usr/share/locale"' -o /var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux-gnu-linuxthreads/intl/localealias.os -MD -MP -MF /var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux-gnu-linuxthreads/intl/localealias.os.dt -MT /var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux-gnu-linuxthreads/intl/localealias.os `-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead. loadmsgcat.c: In function `_nl_init_domain_conv': ../sysdeps/i386/bits/string.h:655: error: can't find a register in class `GENERAL_REGS' while reloading `asm' make[2]: *** [/var/tmp/portage/glibc-2.3.4.20050125-r1/work/build-default-i386-pc-linux-gnu-linuxthreads/intl/loadmsgcat.os] Error 1 make[2]: *** Waiting for unfinished jobs make[2]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20050125-r1/work/glibc-2.3.4/intl' make[1]: *** [intl/subdir_lib] Error 2 make[1]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20050125-r1/work/glibc-2.3.4' make: *** [all] Error 2 !!! ERROR: sys-libs/glibc-2.3.4.20050125-r1 failed. !!! Function toolchain-glibc_src_compile, Line 237, Exitcode 2 #endif I define $ARCH='~x86' What product do I select when reporting this bug on Gentoo bugzilla? Should I just send an email directly to the glibc maintainer? Leo -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: Raid 1 howto
Patrick Marquetecken wrote: > To protect my home server i'm thinking to create a raid1, because this is > the first time for me i have looked around for some howto's. > There are quite a lot howto's(1), but its always from scratch, does anyone > know a howto for changing a working system into a raid1 without formating > disks? It is a bit tricky, but works very well. I wrote a rough HOWTO in this message: http://article.gmane.org/gmane.linux.gentoo.user/118475 Never got to writing a real document. Oh well... HTH. -- Remy Remove underscore and suffix in reply address for a timely response. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Raid 1 howto
Hi, To protect my home server i'm thinking to create a raid1, because this is the first time for me i have looked around for some howto's. There are quite a lot howto's(1), but its always from scratch, does anyone know a howto for changing a working system into a raid1 without formating disks? (1) http://www.schwarzvogel.de/od2md.shtml http://gentoo-wiki.com/HOWTO_Gentoo_Install_on_Software_RAID and others ... TIA Patrick -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] suggestions: buying a new computer
On Wed, 30 Mar 2005 21:53:17 +0100, Digby Tarvin wrote: > > CF cards have a finite writing life - I imagine /var on a CF would > > wear out the card pretty quickly :-) > > > I am aware of the problem, but have found it hard to get concrete > figures. That was why I was thinking of a journal cache rather then > a standalone filesystem. Most recent flash media has a life cycle of 100,000 writes. It sounds a lot, but if you have atime set on a filesystem, the same bit will get hit every time you look at a file. /var or /etc would be particularly hard on it. -- Neil Bothwick WinErr 018: Unrecoverable error - System has been destroyed. Buy a new one. Old Windows licence is not valid anymore. pgpWkDGTNvUkl.pgp Description: PGP signature
Re: [gentoo-user] Error compiling showimg
I have solve the problem by emerge again the packages that showimg depends. Some of that package gave me the same error, so i just emerge their dependecys. After 5 or 6 packages, i dont have any errors and i just emerge showimg without any errors. thanks for your help. On Thursday 31 March 2005 18:25, Dave Nebinger wrote: > > Is there any way to see what libraries hare linked to library? > > ldd is your friend... -- gentoo-user@gentoo.org mailing list
[gentoo-user] Arts don't work
I have a problem with arts, i doesn't work!!! In the sound system module of the control center i can't enable the sound system. The progress bar go to 90% and then go to 0%, over an over. In the console, fi i execute artsd, the fowling error apears: unix_connect: can't connect to server (unix:/tmp/mcop-neves/localhost-541d-424d4a13) Segmentation fault I have kde 3.4 -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Monthly BugDay reminder!
> I don't think 'fixing' is likely to happen as this discussion happens > frequently. It mostly boils down to the list handling being correct but > some clients seems to behave incorrectly. > > Personally, I'd prefer if the clients handle lists properly. As would we all. But the truth of the matter is that for this list I'd bet we could find at least 10 different client programs being used, and the chances of getting them all repaired any time soon are the same as M$ open-sourcing windows xp. More importantly, I don't think it is specifically a client issue. I am very careful to look at my to: and cc: values before posting; the to: always reads gentoo-user@gentoo.org and the cc: only has a targeted individual if I feel that there's relevant information that person needs. That said, I still see many of my posts duplicated on the list, often with a significant time-lapse between the dups (i.e. 30 minutes). Sure, it's one thing to say that the mail list admins want to adhere to the correct standards, but it's quite another to annoy so many of the subscribers as to chase them off, defeating the purpose of having a mailing list at all. We've got folks generating procmail rules and all kinds of other crap just to handle the fact that, under the current configuration, tons of dups are now coming through. I admire the list admins for wanting to adhere to the standards, but at this point in time it is probably too late in the game to do so. Please please please bring back the old mailing list config... -- gentoo-user@gentoo.org mailing list