Re: [Histonet] Rnase free slides?

2010-07-07 Thread Amos Brooks
Hi Emily,
 As you said RNAases are everywhere, so chasing them all down would be
akin to hunting the boogyman. The way I see it is since there is no
realistic way of eliminating any contact at all with RNAase it really comes
down to merely damage control. Start with gloves, you reduce the
introduction of RNAase by a certain percentage. Wipe down all the surfaces
that come in contact with the tissue with RNAase away, you reduced the
percentage a bit further. Only use DEPC treated water and you reduce the
percentage further and so on until it gets to be so labor intensive that it
is non productive. You can hold your breath to reduce them too... don't
laugh I found myself doing it unwittingly one day.
 So what happens if we scale it down to a workable level? Some RNAases
will inevitably be introduced this will reduce the PCR yield some. If you
are doing it a certain way and your yields are sufficient, it aint broke so
don't fix it! So if you are using untreated slides and it's working, don't
change a thing. That having been said I never assume anything is RNAase
free. This includes the slides and any chemicals I use, previously opened or
not. So if it doesn't take much effort to RNAase away treat something I
usually do it. Otherwise I just chalk it up to acceptable yield loss.
 Incidentally I meant 30% sucrose when I said 30% in my last post. I've
never done a side by side comparison of the difference between 30% sucrose
in DEPC and OCT. There may be no appreciable difference at all. I merely
mentioned it as an option.
 So a funny story: I had a researcher really giving me H-E-double hockey
sticks wanting me to make absolutly sure there was no possibility of RNAase
contamination. (Thus the holding my breath I mentioned earlier.) So I went
into full OCD mode and decontaminated everything in RNAase away including
the box I put the slides in. The researcher picked up the slides and after
grilling me again about my technique he popped open the box (bare-handed,
mind you) to check the slides out and ran his finger down the sides of the
slides. I literally saw the RNAase bugs eating away all my hard work before
my eyes. When I caught my breath I took a long lunch and went home early.
Later that week I saw the researcher. He said the yield was great and I must
have followed his advise well. That was a Scotch night! RNAase ... the
boogeyman and Big Foot!

Happy Wednesday,
Amos


On Wed, Jul 7, 2010 at 7:32 PM, Emily Sours  wrote:

> Am I wrong in assuming that the glass slides I get (which are in a
> plastic box, wrapped in plastic) are not RNase free?  They're
> superfrost plus from Fisher.  It hasn't been a problem for us to
> assume so, but I'm wondering what other labs think about it.
> We've never treated our slides with Rnase Away or rinsed in DEPC
> water.  We use DEPC water for in situ hybridization solutions.  The in
> situ dishes are sprayed with RNase away, then DEPC water.
> Also use OCT when you section, it'll make your life so much easier!
> It's assumed in my lab that if a chemical came in and hasn't been
> opened, it's RNase free.  To keep it RNase free, you always wear
> gloves.  Store your slides in a new box to keep them RNase free.
>
> RNases are everywhere on people, I assumed, and that was the problem.
> I didn't think RNases are everywhere in the universe on every object.
> But I could be wrong.  Anyone else have an opinion?
>
> Emily
> --
> Dark Pictures, thrones and stones that pilgrims kiss
> And poems that take a thousand years to die
> But ape the immortality of this
> Red label on a little butterfly.
>
> -Vladimir Nabokov, concluding stanza of ‘A Discovery’ 1941.
>
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] DAB

2010-07-07 Thread Tony Henwood
Keri,

For the free base of DAB you will need to dissolve it in N,N dimethyl 
formamide. The free base is poorly soluble in aqueous solutions.
Substitute the formamide for the distilled water:

1.  Weigh out 2g DAB in a fume hood
2.  Dissolve in 10ml N,N dimethyl formamide
3.  Label fifty 1ml reagent vials
4.  Aliquot 0.1ml DAB solution in each tube
5.  Freeze and Store at -20oC

For use:

Add 0.1ml DAB solution to 50ml buffer and add 50 microlitres of 30% hydrogen 
peroxide.

I prefer to use the DAB tetrahydrochloride

Regards

Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC)
Laboratory Manager & Senior Scientist
Tel: 612 9845 3306
Fax: 612 9845 3318
the children's hospital at westmead 
Cnr Hawkesbury Road and Hainsworth Street, Westmead 
Locked Bag 4001, Westmead NSW 2145, AUSTRALIA 




-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Keri Colwell
Sent: Thursday, 8 July 2010 7:10 AM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] DAB


Hello Histonetters,

I am currently trying to work out a new DAB protocol to be used with IHC on 
FFPE sections.

I am testing three different protocols, and am having limited success.

The first protocol requires me to make a DAB stock solution of 10mg in 1 ml 
dH20, which is then filtered and frozen immediately.  This protocol suggests 
using DAB tetrahydrochloride XH20, but I am using the free base of DAB as that 
is what was on hand.  The free base does not want to go into solution, but has 
produced some reaction in my IHC.

My second protocol asks for 40mg DAB in 1.5 ml Tris buffer (0.05M, pH 7.6), to 
make my stock solution.  I am again using the free base, and have been stirring 
since 11:30 am yesterday (MDT) with the result being a chocolate milk-like 
substance.

My third protocol requires me to make up the DAB fresh each time I want to use 
it. This protocol also asks for the tetrahydrochloride form, but again I used 
the free base and did get some reaction.

Does anyone have thoughts on about how to get the free base to go into solution 
without oxidizing, or thoughts about free base versus the other form of DAB?


Thanks!


Keri

Keri Colwell
Laboratory Technologist | Technologiste de laboratoire
TSE and Pathology
Lethbridge Laboratory | Laboratoire de Lethbridge
Canadian Food Inspection Agency | Agence candienne d'inspection des aliments 
Township Road 9-1 | Ch de Canton 9-1 Box 640  | CP 640 Lethbridge, AB T1J 3Z4 
E-mail | Courriel: keri.colw...@inspection.gc.ca 
Telephone | Téléphone:  403-382-5500
Facsimile | Télécopieur: 403-382-5583
Government of Canada | Gouvernement du Canada

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu 
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

*
This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed. If 
you are not the intended recipient, please delete it and notify the sender.

Views expressed in this message and any attachments are those of the individual 
sender, and are not necessarily the views of The Children's Hospital at Westmead

This note also confirms that this email message has been virus scanned and 
although no computer viruses were detected, The Childrens Hospital at Westmead 
accepts no liability for any consequential damage resulting from email 
containing computer viruses.
*

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] Reprocess

2010-07-07 Thread Tony Henwood
You do not need to rehydrate the blocks back to water, 

While the tissue is still hot (ie the wax is still molten) blot the
tissue dry, place it back in its cassette and place the cassette in 10%
formalin for reprocessing. This procedure dramatically improves the
results in at least 90% of cases. The excellent results are probably due
to the protective nature of the wax present in the adequately processed
portions of the block. This insulates the tissue from the harmful
effects of ethanol on the adequately processed portions of the tissue
preventing the tissue from becoming hard and brittle (Johnson 2003).

Johnson (2003) Histologic 36(1):21-22.

Regards

Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC)
Laboratory Manager & Senior Scientist
Tel: 612 9845 3306
Fax: 612 9845 3318
the children's hospital at westmead 
Cnr Hawkesbury Road and Hainsworth Street, Westmead 
Locked Bag 4001, Westmead NSW 2145, AUSTRALIA 




-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of
sgoe...@xbiotech.com
Sent: Thursday, 8 July 2010 1:37 AM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Reprocess



   Hello  all!!  Hope everyone had a happy 4th!!  Question =oday is...I
   grossed  in  some  fat  that I need to routine process.  I ha=e done
   this  in  the  past  with  extra fixation and no problem?  This tim=
   however  it didn't fix all the way through and I have oily unfixed
fat
   in  =the  middle  of  my  block.  I fixed for 48 hours, but guess my
   section  we=re  too big and needed more.  I want to fix for a little
   longer  and rep=ocess the block.  I know I need to melt it down, but
   then  what? =I  have done this before, it's just my brain is getting
   older =)

   Thanks in advance!!

   Sarah Goebel, B.A., HT (=SCP)

   Histotechnician
   
   XBiotech USA Inc.

   
   8201 East Riverside Dr. Bldg 4 Suite 100

   Austin, Texas  78744

   (512)386-5107 ___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

*
This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed. If 
you are not the intended recipient, please delete it and notify the sender.

Views expressed in this message and any attachments are those of the individual 
sender, and are not necessarily the views of The Children's Hospital at Westmead

This note also confirms that this email message has been virus scanned and 
although no computer viruses were detected, The Childrens Hospital at Westmead 
accepts no liability for any consequential damage resulting from email 
containing computer viruses.
*

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Re: [Histonet] Rnase free slides?

2010-07-07 Thread Emily Sours
Am I wrong in assuming that the glass slides I get (which are in a
plastic box, wrapped in plastic) are not RNase free?  They're
superfrost plus from Fisher.  It hasn't been a problem for us to
assume so, but I'm wondering what other labs think about it.
We've never treated our slides with Rnase Away or rinsed in DEPC
water.  We use DEPC water for in situ hybridization solutions.  The in
situ dishes are sprayed with RNase away, then DEPC water.
Also use OCT when you section, it'll make your life so much easier!
It's assumed in my lab that if a chemical came in and hasn't been
opened, it's RNase free.  To keep it RNase free, you always wear
gloves.  Store your slides in a new box to keep them RNase free.

RNases are everywhere on people, I assumed, and that was the problem.
I didn't think RNases are everywhere in the universe on every object.
But I could be wrong.  Anyone else have an opinion?

Emily
--
Dark Pictures, thrones and stones that pilgrims kiss
And poems that take a thousand years to die
But ape the immortality of this
Red label on a little butterfly.

-Vladimir Nabokov, concluding stanza of ‘A Discovery’ 1941.



On Wed, Jul 7, 2010 at 5:13 PM, Amos Brooks  wrote:
> Hi,
>     This is certainly possible, but RNAase is everywhere, and in a cryostat
> you really can't remove it because the RNA remover is an aqueous solution
> that will freeze in the cryostat. A disposable blade (RNAase cleaned) is
> probably the best you can do there. One thing to consider, I'm sure OCT
> isn't RNAase free, so perhaps you should use 30% in DEPC treated water.
>     I have not seen RNAase free slides being sold by any vendors. I usually
> use LCM slides, but your are doing this a bit differently. For this I
> wouldn't waste my money on buying RNAase free slides. You can just dip the
> slides in RNAase away and let them air dry (use them soon after though).
> Further, I would not use charged slides as that would be counter-productive.
> You are trying to get tissues off the slides, so adhesives would not be
> helpful to you. Just a plain ole' glass slide with no bells or whistles.
> Come to think of it that may be hard to find too ;-)
>
> Good luck,
> Amos
>
>
> Message: 1
> Date: Tue, 06 Jul 2010 15:49:58 -0400
> From: Caroline Bass 
> Subject: [Histonet] Rnase free slides?
> To: 
> Message-ID: 
>>
> Content-Type: text/plain;       charset="US-ASCII"
>
> Hello,
>
> I'm doing RNA work for the first time. My plan is to take a fresh rat brain,
> block quickly, freeze by immersing in dry-ice cooled isopentane, storing at
> -80, collecting tissue sections (thickness will be determined, somewhere
> between 20 and 300 um), and punching the particular regions I need out of
> the sections. I will then isolate RNA from the punches for qPCR analysis.
>
> Questions:
>
> 1) does this sound like a viable plan?
> 2) and suggestions, what to be careful of?
> 3) where do I have to be careful of Rnase, should I use disposable blades,
> cleaned with Rnase away?
> 4) where can I find Rnase free slides, or should I just make my own. I
> usually use charged slides.
>
> Any and all suggestions will be appreciated. I'm new to this and don't know
> where I will have problems.
>
> Thanks!
>
> Caroline
> ___
> Histonet mailing list
> Histonet@lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Re: gout crystals

2010-07-07 Thread Robert Richmond
Gout crystals are monosodium urate. In clinical material they're found
in large masses, called tophi (TOE-fie, singular tophus). The
individual crystals are long and needle-like, with negative
birefringence if your pathologist is so fortunate as to have a full
wave plate (a.k.a. first order plate, gout slider) on their
microscope.

The alcohol fixation and processing routine is ideal, but rarely
achievable. The specimen will normally come to you in formalin. The
crystal masses in the tophi can be picked out with the point of a
scalpel blade (if you're still allowed scalpel blades with points on
them) into water or alcohol, and looked at as a wet preparation in a
polarizing microscope, where you can see the crystals with the aid of
a polarizer. Calcium pyrophosphate ("pseudogout") crystals, blocky
with positive birefringence, can also be identified with this
technique.

The CPT code for crystal examination cannot, I think, be assigned in
addition to the 88305.

Bob Richmond
Samurai Pathologist
Knoxville TN

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] universal microtome aligner

2010-07-07 Thread Joanne Clark
We purchased this item from Newcomer supply and have been universally
disappointed in it.  The concept for the tool is good, but we have found
that it will not clamp tightly onto our Leica microtomes (model RM2125).

 

Joanne Clark, HT

Histology Supervisor

Pathology Consultants of New Mexico

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Looking for Histology position in the Seattle Washington area

2010-07-07 Thread histotech90
Hello Netters!
I am trying to relocate to the Seattle Washington area and looking for a 
Histology position. I have 17 years experience, have set up labs as consultant 
and also have 5 years managememt experience. Will consider any position. I am 
also HT ascp. Thank you in advance!!




___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Rnase free slides?

2010-07-07 Thread Amos Brooks
Hi,
 This is certainly possible, but RNAase is everywhere, and in a cryostat
you really can't remove it because the RNA remover is an aqueous solution
that will freeze in the cryostat. A disposable blade (RNAase cleaned) is
probably the best you can do there. One thing to consider, I'm sure OCT
isn't RNAase free, so perhaps you should use 30% in DEPC treated water.
 I have not seen RNAase free slides being sold by any vendors. I usually
use LCM slides, but your are doing this a bit differently. For this I
wouldn't waste my money on buying RNAase free slides. You can just dip the
slides in RNAase away and let them air dry (use them soon after though).
Further, I would not use charged slides as that would be counter-productive.
You are trying to get tissues off the slides, so adhesives would not be
helpful to you. Just a plain ole' glass slide with no bells or whistles.
Come to think of it that may be hard to find too ;-)

Good luck,
Amos


Message: 1
Date: Tue, 06 Jul 2010 15:49:58 -0400
From: Caroline Bass 
Subject: [Histonet] Rnase free slides?
To: 
Message-ID: 
>
Content-Type: text/plain;   charset="US-ASCII"

Hello,

I'm doing RNA work for the first time. My plan is to take a fresh rat brain,
block quickly, freeze by immersing in dry-ice cooled isopentane, storing at
-80, collecting tissue sections (thickness will be determined, somewhere
between 20 and 300 um), and punching the particular regions I need out of
the sections. I will then isolate RNA from the punches for qPCR analysis.

Questions:

1) does this sound like a viable plan?
2) and suggestions, what to be careful of?
3) where do I have to be careful of Rnase, should I use disposable blades,
cleaned with Rnase away?
4) where can I find Rnase free slides, or should I just make my own. I
usually use charged slides.

Any and all suggestions will be appreciated. I'm new to this and don't know
where I will have problems.

Thanks!

Caroline
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] DAB

2010-07-07 Thread Keri Colwell
Hello Histonetters,

I am currently trying to work out a new DAB protocol to be used with
IHC on FFPE sections.

I am testing three different protocols, and am having limited success.

The first protocol requires me to make a DAB stock solution of 10mg in
1 ml dH20, which is then filtered and frozen immediately.  This protocol
suggests using DAB tetrahydrochloride XH20, but I am using the free base
of DAB as that is what was on hand.  The free base does not want to go
into solution, but has produced some reaction in my IHC.

My second protocol asks for 40mg DAB in 1.5 ml Tris buffer (0.05M, pH
7.6), to make my stock solution.  I am again using the free base, and
have been stirring since 11:30 am yesterday (MDT) with the result being
a chocolate milk-like substance.

My third protocol requires me to make up the DAB fresh each time I want
to use it. This protocol also asks for the tetrahydrochloride form, but
again I used the free base and did get some reaction.

Does anyone have thoughts on about how to get the free base to go into
solution without oxidizing, or thoughts about free base versus the other
form of DAB?


Thanks!


Keri

Keri Colwell
Laboratory Technologist | Technologiste de laboratoire
TSE and Pathology
Lethbridge Laboratory | Laboratoire de Lethbridge
Canadian Food Inspection Agency | Agence candienne d'inspection des
aliments
Township Road 9-1 | Ch de Canton 9-1
Box 640  | CP 640
Lethbridge, AB T1J 3Z4
E-mail | Courriel: keri.colw...@inspection.gc.ca 
Telephone | Téléphone:  403-382-5500
Facsimile | Télécopieur: 403-382-5583
Government of Canada | Gouvernement du Canada

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Re: Has anyone used a biotin block in their antibody diluent?

2010-07-07 Thread Hobbs, Carl


I assume that you are using a biotinylated detection system?
If so, endogenous biotin labelling is specific, tho' NOT wanted ;-)
So, before you try variations, just buy a kit and see if your "non-specific" 
immunostaining is due to endog. biotin ...follow their instructions by 
pre-incubating in the kit.
Then, if you find that the staining you get is due to endog. biotin...you can 
modify away ( such as including in primary Ab: However, the kits are RTU: so, 
by adding to primary Ab, for eg, you use a heck of a lot of kit solution.;-)

 I  always pre-incubate because there are so many tissues that do NOT require 
endog. biotin blocking.
Also, if you discover that endogenous biotin  is the problem and you will 
therefore need to use a biotin blocking kit regularly, why not  make up your 
own?
Far cheaper/equally effective: many sites give protocols, such as this one   
http://www.immunoportal.com/
Please Post further if you have any problems.
Good luck.


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] Reprocess

2010-07-07 Thread sgoebel

   Is  this  run backwards ok?  I want to keep the fat.  In = fact I only
   want the fat?

   Sarah Goebel, B.A., HT (ASCP)

   Histot= echnician

   XBiotech USA Inc.

   8201 East Riversi= de Dr. Bldg 4 Suite 100

   Austin, Texas  78744<= /div>
   (512)386-5107

    Original Message 
   Subject: RE: [Histonet] Reprocess
   From: Cheri Miller <[1]cmil...@phy= slab.com>
   Date: Wed, July 07, 2010 8:53 am
   To:"[2]sgoe...@xbiotech.com"&l=t;[3]sgoe...@xbiotech.com>,
   "[4]histo...@lists.utso= uthwestern.edu"
   <[5]histo...@lists.utsouthwestern.edu>
   Hi  Sarah,  I  don't  melt them down I just drop them in with my dirty
   molds  an=  d  lids  and  run  them  through  the cleaning cycle on my
   processor.  The  Xylene = and Alcohol will melt the oily fat. When the
   clean  cycle  is complete I just= drop them back into formalin until I
   process that evening. It works very w= ell.
   Cheryl A. Miller HT(ASAP)cm
   Histology/Cytology Prep Supervisor
   Physicians Laboratory Services
   Omaha, NE. 402 731 4145 ext. 554
   -Original Message-
   From:  [6]histon=  et-boun...@lists.utsouthwestern.edu
   [[7]mailto:histonet-boun...@lists.utsouthwestern.edu=  ]  On Behalf Of
   [8]sgoe...@xbiote= ch.com
   Sent: Wednesday, July 07, 2010 10:37 AM
   To: [9]histo...@lists.u= tsouthwestern.edu
   Subject: [Histonet] Reprocess
   Hello all!! Hope everyone had a happy 4th!! Question =day is...I
   grossed in some fat that I need to routine process. I ha= done
   this  in  the  past  with  extra  fixation and no problem? This tim=
   however  it didn't fix all the way through and I have oily unfixed fat
   in =e middle of my block. I fixed for 48 hours, but guess my
   section we= too big and needed more. I want to fix for a little
   longer and rep=cess the block. I know I need to melt it down, but
   then what? =ave done this before, it's just my brain is getting
   older =)
   Thanks in advance!!
   Sarah Goebel, B.A., HT (=CP)
   Histotechnician
   XBiotech USA Inc.
   8201 East Riverside Dr. Bldg 4 Suite 100
   Austin, Texas 78744
   (512)386-5107
   ___
   Histonet mailing list
   [10]histo...@lists.utsou= thwestern.edu
   [11]http:= //lists.utsouthwestern.edu/mailman/listinfo/histonet
   PRIVILEGED  /  CONFIDENTIAL  INFORMATION  may  be  contained  in  this
   message.  If=  you are not the addressee intended / indicated or agent
   responsible  for  de=  livering  it  to  the addressee, you are hereby
   notified  that  you are in posse= ssion of confidential and privileged
   information.  Any  dissemination,  distr=  ibution, or copying of this
   e-mail  is strictly prohibited. If you have rec= eived this message in
   error,  please  notify  the sender immediately and delet= e this email
   from your system.


References

   1. 3D"mailto://cmil...@physlab.com"/
   2. 3D"mailto://sgoe...@xbiotech.com"/
   3. 3D"mailto://sgoe...@xbiotech.com"/
   4. 3D"mailto://histonet@lists.utsouthwestern.edu"/
   5. 3D"mailto://histo...@lists.utsouthwestern.e=/
   6. 3D"mailto://histonet-boun...@lists.utsouthwestern.edu"/
   7. 3D"mailto:histonet-bounces   8. 3D"mailto://sgoe...@xbiotech.com"/
   9. 3D"mailto://histonet@lists.utsouthwestern.edu"/
  10. 3D"mailto://Histonet@lists.utsouthwestern.edu"/
  11. 3D"http://lists.utsouthwestern.edu/mailman/listinfo/histonet";
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] (no subject)

2010-07-07 Thread sgoebel

   I  totally  agree!!!   Why  did  I spend the time, effort, and mo= ney
   (additionally  to  stay  certified)  if  I  am  not going to get a pay
   incenti=  ve  to do so?  Sure, anyone can get OJT for many things, but
   would  you  = pay a non-registered PA (pathologist assistant) the same
   as  someone  who  had=  completed  a  masters  program  and passed the
   exam...of  course  not  (in fact y= ou probably wouldn't even hire the
   person!).I   have  worked  in  places  =  where  there  are  these
   "non-registered  histotechs",  my question always was..= .what even is
   this  position?   I  had to pay my dues as an underpaid lab= assistant
   like  I'm  sure  everyone  else  did while getting my degree and regi   
stry...why  shouldn't  everyone  else?   I  know in the past it really
   gets=  under people's skin when non-registered are making only $2 less
   an  hour  th=  an a registered tech with the same experience.  I would
   say  listen  to  =  your  "dinosaur" management...you have to earn the
   money you make!!!
   Sarah G= oebel, B.A., HT (ASCP)
   Histotechnician

   XBiote= ch USA Inc.

   8201 East Riverside Dr. Bldg 4 Suite 100

   Austin, Texas  78744

   (512)386-5107

    Original Message 
   Subject: RE: [Histonet] (no subject)
   From: "Gunderson, Michael" <[1]m= gund...@fairview.org>
   Date: Wed, July 07, 2010 10:31 am
   To: Jackie M O'Connor , "Fredrickson,
   Mona"
   <[3]mfredrick...@nrh-ok.com>
   Cc: "[4]histo...@lists.= utsouthwestern.edu"
   <[5]histo...@lists.u= tsouthwestern.edu>,
   "[6]histonet-bo= un...@lists.utsouthwestern.edu"
   <[7]histonet= -boun...@lists.utsouthwestern.edu>
   By  telling  someone  they  should  earn  the same without passing our
   registrati=  on exam diminishes the effort and hard work of registered
   HT  and HTL's. Ma= nagement are not dinosaurs, they are fair. The exam
   is  there  to  weed  out  = the weak and under or un-qualified, if you
   cannot  pass  the  test,  you have n= ot earned the right of those who
   have.
   Michael A. Gunderson HTL(ASCP)
   Lead Technologist-Immunostains Laboratory
   University of Minnesota Medical Center-Fairview
   2450 Riverside Avenue
   Minneapolis, MN 55454
   
   Laboratory: 1-612-273-9119
   Fax: 1-612-273-4879
   Email: [8]mgund...@fairview.org   
   From:  [9]histon=  et-boun...@lists.utsouthwestern.edu
   [[10]histonet-boun...@lists.utsouthwestern.edu]= On Behalf Of Jackie M
   O'Connor [Jackie.O'[11]con...@abbott.com]
   Sent: Wednesday, July 07, 2010 12:09 PM
   To: Fredrickson, Mona
   Cc: [12]histo...@lists.u= tsouthwestern.edu;
   [13]histonet-boun...@lists.utsouthwestern.edu
   Subject: Re: [Histonet] (no subject)
   Ask management if he would suddenly be a better technician and more
   valuable if he passed the exam? Duh - no. In my opinion, merit
   increases should be based on merit - not documentation.
   If he's not eligible, he's not eligible. Does your management increase
   pay based on certification? So, if a certified tech with one year of
   experience came to your lab, they would be paid more than an incumbent
   tech with 8 years experience? Sounds like you have some dinosaur
   management there.
   From:
   "Fredrickson, Mona" <[14]mfredr= ick...@nrh-ok.com>
   To:
   "[15]histo...@lists.utso= uthwestern.edu"
   <[16]histo...@lists.utsouthwestern.edu>
   Date:
   07/07/2010 12:04 PM
   Subject:
   [Histonet] (no subject)
   Sent by:
   [17]histonet-bou= n...@lists.utsouthwestern.edu
   Hello All in Histoland,
   I  have  a  tech who is employed as Histotech eligible, but he was not
   able
   to pass the HT exam and now is no longer eligible to thake the test
   because he has to get his associates degree in science. The lab
   management  wants  to  change  his  title  from  histotech eligible to
   histotech  non-registered  without  pay  increase.  But I feel the pay
   should be
   increased. So I would appreciate comments on the following:
   1.) should title be changed from eligible to non-registered?
   2.) After having done this for 8 years should his pay stay the same?
   3. Should job responsibilities remain the same
   Thank you in advance for feedback!
   Histotech in Oklahoma
   
   
   CONFIDENTIALITY NOTICE:
   This e-mail communication and any attachments may
   contain confidential and privileged information for the use
   of the designated recipients named above. If you are not
   the intended recipient, you are hereby notified that you
   have received this communication in error and that any
   review, disclosure, dissemination, distribution, or copying
   of it or its contents is prohibited. If you have received
   this communication in error, please notify the sender
   immediately and destroy all copies of this communication
   and any attachments.
   ___
   Histonet mailing list
  

RE: [Histonet] (no subject)

2010-07-07 Thread Cheri Miller
He did not meet his and his employers agreed stipulations for employment. If he 
was being paid equal to that of a registered tech then he should receive a 
decrease in pay. If not then he should continue with merit increases only. 
Getting an ASCP registry is a marketable achievement for both the tech and the 
employer.
Cheryl A. Miller HT(ASAP)cm
Histology/Cytology Prep Supervisor
Physicians Laboratory Services
Omaha, NE. 402 731 4145 ext. 554

-Original Message-


PRIVILEGED / CONFIDENTIAL INFORMATION may be contained in this message.  If you 
are not the addressee intended / indicated or agent responsible for delivering 
it to the addressee, you are hereby notified that you are in possession of 
confidential and privileged information.  Any dissemination, distribution, or 
copying of this e-mail is strictly prohibited.  If you have received this 
message in error, please notify the sender immediately and delete this email 
from your system.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Re: [Histonet] (no subject)

2010-07-07 Thread DKBoyd
It seems to me that Histotech non-registered without pay increase would be 
appropriate.  Why would you change his title and give him an increase in 
pay when he didn't fulfill his employment agreement?  I would not decrease 
his pay and I would not terminate a good employee.  Apparently he earned 
his present pay as an "undocumented" non-registered Histotech and nothing 
has changed.  He should continue to get merit increases as per usual, with 
the goal of getting the Associates Degree, and registry (if still 
interested).
He should be allowed to perform any function he has been deemed competent 
to perform. 
Just my 2 cents.

Debbie M. Boyd, HT(ASCP) l Chief Histologist l Southside Regional Medical 
Center I 
200 Medical Park Boulevard l Petersburg, Va.  23805 l T: 804-765-5050 l F: 
804-765-5582 l dkb...@chs.net







"Fredrickson, Mona"  
Sent by: histonet-boun...@lists.utsouthwestern.edu
07/07/2010 01:04 PM

To
"Histonet@lists.utsouthwestern.edu" 
cc

Subject
[Histonet] (no subject)






Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able 
to pass the HT exam and now is no longer eligible to thake the test 
because he has to get his associates degree in science.  The lab 
management wants to change his title from histotech eligible to histotech 
non-registered without pay increase.  But I feel the pay should be 
increased. So I would appreciate comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may 
contain confidential and privileged information for the use 
of the designated recipients named above. If you are not 
the intended recipient, you are hereby notified that you 
have received this communication in error and that any 
review, disclosure, dissemination, distribution, or copying 
of it or its contents is prohibited. If you have received 
this communication in error, please notify the sender 
immediately and destroy all copies of this communication 
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



--
Disclaimer: This electronic message may contain information that is
Proprietary, Confidential, or legally privileged or protected. It
is intended only for the use of the individual(s) and entity named
in the message. If you are not an intended recipient of this
message, please notify the sender immediately and delete the
material from your computer. Do not deliver, distribute or copy
this message and do not disclose its contents or take any action in
reliance on the information it contains.
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] (no subject)

2010-07-07 Thread Blazek, Linda
I have known some really crummy MD's too but I still wouldn't want to go to a 
physician that couldn't pass his boards.  I sympathize with the person that 
didn't pass the exam and that doesn't make him a poor histotech just not one 
that gets the HT (ASCP) after his name and not eligible for the same pay scale 
as that of a registered tech.

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jackie M 
O'Connor
Sent: Wednesday, July 07, 2010 1:35 PM
To: Histonet@lists.utsouthwestern.edu; 
histonet-boun...@lists.utsouthwestern.edu; Fredrickson, Mona
Subject: RE: [Histonet] (no subject)

Over the years, I have had some HT and HTL registered technologists who 
were crummy technicians.   I'm jus' sayin' that certification doesn't 
automatically mean you are better than a non-certified tech. 




From:
"Gunderson, Michael" 
To:
Jackie M O'Connor , "Fredrickson, Mona" 

Cc:
"Histonet@lists.utsouthwestern.edu" , 
"histonet-boun...@lists.utsouthwestern.edu" 

Date:
07/07/2010 12:31 PM
Subject:
RE: [Histonet] (no subject)



By telling someone they should earn the same without passing our 
registration exam diminishes the effort and hard work of registered HT and 
HTL's.  Management are not dinosaurs, they are fair.   The exam is there 
to weed out the weak and under or un-qualified, if you cannot pass the 
test, you have not earned the right of those who have.

Michael A. Gunderson HTL(ASCP)
Lead Technologist-Immunostains Laboratory
University of Minnesota Medical Center-Fairview
2450 Riverside Avenue
Minneapolis, MN 55454


Laboratory: 1-612-273-9119
Fax: 1-612-273-4879
Email: mgund...@fairview.org

From: histonet-boun...@lists.utsouthwestern.edu 
[histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jackie M O'Connor 
[Jackie.O'con...@abbott.com]
Sent: Wednesday, July 07, 2010 12:09 PM
To: Fredrickson, Mona
Cc: Histonet@lists.utsouthwestern.edu; 
histonet-boun...@lists.utsouthwestern.edu
Subject: Re: [Histonet] (no subject)

Ask management if he would suddenly be a better technician and more
valuable if he passed the exam?   Duh - no.   In my opinion, merit
increases should be based on merit - not documentation.
If he's not eligible, he's not eligible.  Does your management increase
pay based on certification?   So, if a certified tech with one year of
experience came to your lab, they would be paid more than an incumbent
tech with 8 years experience?  Sounds like you have some dinosaur
management there.



From:
"Fredrickson, Mona" 
To:
"Histonet@lists.utsouthwestern.edu" 
Date:
07/07/2010 12:04 PM
Subject:
[Histonet] (no subject)
Sent by:
histonet-boun...@lists.utsouthwestern.edu



Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able
to pass the HT exam and now is no longer eligible to thake the test
because he has to get his associates degree in science.  The lab
management wants to change his title from histotech eligible to histotech
non-registered without pay increase.  But I feel the pay should be
increased. So I would appreciate comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may
contain confidential and privileged information for the use
of the designated recipients named above. If you are not
the intended recipient, you are hereby notified that you
have received this communication in error and that any
review, disclosure, dissemination, distribution, or copying
of it or its contents is prohibited. If you have received
this communication in error, please notify the sender
immediately and destroy all copies of this communication
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Re: [Histonet] (no subject)

2010-07-07 Thread Sheila Haas
I agree with Tom and Michael. Those who have been fortunate enough to pass 
deserve the kudos and pay increase. As for the title, he simply isn't eligible 
at this point. He is a non-registered tech.
 
Sheila Haas
Laboratory Supervisor
Micro Path Laboratories
 





From: "Fredrickson, Mona" 
To: "Histonet@lists.utsouthwestern.edu" 
Sent: Wed, July 7, 2010 1:03:55 PM
Subject: [Histonet] (no subject)

Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able to 
pass 
the HT exam and now is no longer eligible to thake the test because he has to 
get his associates degree in science.  The lab management wants to change his 
title from histotech eligible to histotech non-registered without pay 
increase.  
But I feel the pay should be increased. So I would appreciate comments on the 
following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may
contain confidential and privileged information for the use
of the designated recipients named above. If you are not
the intended recipient, you are hereby notified that you
have received this communication in error and that any
review, disclosure, dissemination, distribution, or copying
of it or its contents is prohibited. If you have received
this communication in error, please notify the sender
immediately and destroy all copies of this communication
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet




___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] (no subject)

2010-07-07 Thread Jackie M O'Connor
Over the years, I have had some HT and HTL registered technologists who 
were crummy technicians.   I'm jus' sayin' that certification doesn't 
automatically mean you are better than a non-certified tech. 




From:
"Gunderson, Michael" 
To:
Jackie M O'Connor , "Fredrickson, Mona" 

Cc:
"Histonet@lists.utsouthwestern.edu" , 
"histonet-boun...@lists.utsouthwestern.edu" 

Date:
07/07/2010 12:31 PM
Subject:
RE: [Histonet] (no subject)



By telling someone they should earn the same without passing our 
registration exam diminishes the effort and hard work of registered HT and 
HTL's.  Management are not dinosaurs, they are fair.   The exam is there 
to weed out the weak and under or un-qualified, if you cannot pass the 
test, you have not earned the right of those who have.

Michael A. Gunderson HTL(ASCP)
Lead Technologist-Immunostains Laboratory
University of Minnesota Medical Center-Fairview
2450 Riverside Avenue
Minneapolis, MN 55454


Laboratory: 1-612-273-9119
Fax: 1-612-273-4879
Email: mgund...@fairview.org

From: histonet-boun...@lists.utsouthwestern.edu 
[histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jackie M O'Connor 
[Jackie.O'con...@abbott.com]
Sent: Wednesday, July 07, 2010 12:09 PM
To: Fredrickson, Mona
Cc: Histonet@lists.utsouthwestern.edu; 
histonet-boun...@lists.utsouthwestern.edu
Subject: Re: [Histonet] (no subject)

Ask management if he would suddenly be a better technician and more
valuable if he passed the exam?   Duh - no.   In my opinion, merit
increases should be based on merit - not documentation.
If he's not eligible, he's not eligible.  Does your management increase
pay based on certification?   So, if a certified tech with one year of
experience came to your lab, they would be paid more than an incumbent
tech with 8 years experience?  Sounds like you have some dinosaur
management there.



From:
"Fredrickson, Mona" 
To:
"Histonet@lists.utsouthwestern.edu" 
Date:
07/07/2010 12:04 PM
Subject:
[Histonet] (no subject)
Sent by:
histonet-boun...@lists.utsouthwestern.edu



Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able
to pass the HT exam and now is no longer eligible to thake the test
because he has to get his associates degree in science.  The lab
management wants to change his title from histotech eligible to histotech
non-registered without pay increase.  But I feel the pay should be
increased. So I would appreciate comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may
contain confidential and privileged information for the use
of the designated recipients named above. If you are not
the intended recipient, you are hereby notified that you
have received this communication in error and that any
review, disclosure, dissemination, distribution, or copying
of it or its contents is prohibited. If you have received
this communication in error, please notify the sender
immediately and destroy all copies of this communication
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] (no subject)

2010-07-07 Thread Gunderson, Michael
By telling someone they should earn the same without passing our registration 
exam diminishes the effort and hard work of registered HT and HTL's.  
Management are not dinosaurs, they are fair.   The exam is there to weed out 
the weak and under or un-qualified, if you cannot pass the test, you have not 
earned the right of those who have.

Michael A. Gunderson HTL(ASCP)
Lead Technologist-Immunostains Laboratory
University of Minnesota Medical Center-Fairview
2450 Riverside Avenue
Minneapolis, MN 55454


Laboratory: 1-612-273-9119
Fax: 1-612-273-4879
Email: mgund...@fairview.org

From: histonet-boun...@lists.utsouthwestern.edu 
[histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jackie M O'Connor 
[Jackie.O'con...@abbott.com]
Sent: Wednesday, July 07, 2010 12:09 PM
To: Fredrickson, Mona
Cc: Histonet@lists.utsouthwestern.edu; histonet-boun...@lists.utsouthwestern.edu
Subject: Re: [Histonet] (no subject)

Ask management if he would suddenly be a better technician and more
valuable if he passed the exam?   Duh - no.   In my opinion, merit
increases should be based on merit - not documentation.
If he's not eligible, he's not eligible.  Does your management increase
pay based on certification?   So, if a certified tech with one year of
experience came to your lab, they would be paid more than an incumbent
tech with 8 years experience?  Sounds like you have some dinosaur
management there.



From:
"Fredrickson, Mona" 
To:
"Histonet@lists.utsouthwestern.edu" 
Date:
07/07/2010 12:04 PM
Subject:
[Histonet] (no subject)
Sent by:
histonet-boun...@lists.utsouthwestern.edu



Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able
to pass the HT exam and now is no longer eligible to thake the test
because he has to get his associates degree in science.  The lab
management wants to change his title from histotech eligible to histotech
non-registered without pay increase.  But I feel the pay should be
increased. So I would appreciate comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may
contain confidential and privileged information for the use
of the designated recipients named above. If you are not
the intended recipient, you are hereby notified that you
have received this communication in error and that any
review, disclosure, dissemination, distribution, or copying
of it or its contents is prohibited. If you have received
this communication in error, please notify the sender
immediately and destroy all copies of this communication
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] QC log

2010-07-07 Thread Gill, Caula A.
I forgot to say that we use a different one for specials so if you need
that also let me know. 

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Gill,
Caula A.
Sent: Wednesday, July 07, 2010 1:19 PM
To: Scott, Allison D; histonet@lists.utsouthwestern.edu
Subject: RE: [Histonet] QC log

This is the QC sheet we use and the Pathologist documents any issues
there may be if any. 

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Scott,
Allison D
Sent: Wednesday, July 07, 2010 12:26 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] QC log

Hello to all in histoland.  Does anyone have a QC log sheet that
documents the H&E stain, microtomy, floaters and other issues that they
would be willing to share with me.  Any help in this matter will be
greatly appreciated.
 
 
Allison Scott HT(ASCP)
Histology Supervisor
LBJ Hospital
Houston, Texas 77026
 
CONFIDENTIALITY NOTICE:
If you have received this e-mail in error, please immediately notify the
sender by return e-mail and delete this e-mail and any attachments from
your computer system.

To the extent the information in this e-mail and any attachments contain
protected health information as defined by the Health Insurance
Portability and Accountability Act of 1996 ("HIPAA"), PL 104-191; 45 CFR
Parts 160 and 164; or Chapter 181, Texas Health and Safety Code, it is
confidential and/or privileged.  This e-mail may also be confidential
and/or privileged under Texas law.  The e-mail is for the use of only
the individual or entity named above.  If you are not the intended
recipient, or any authorized representative of the intended recipient,
you are hereby notified that any review, dissemination or copying of
this e-mail and its attachments is strictly prohibited.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] (no subject)

2010-07-07 Thread Podawiltz, Thomas
That is a hard question. Here when we hire a un registered tech, they are given 
a time limit (3 years) to get their certification. At the end of three years, 
we reserve the right to terminate if they have not achieved their certification.

What are the levels for your lab? Do you have anything like Lab Scientist 1, 2 
or 3 and if so are there pay ranges between each level? 

If there are levels like that, I as manager,  would keep him in level 1 with no 
salary increase until the degree is finished. 


Tom Podawiltz, HT (ASCP)
Histology Section Head/Laboratory Safety Officer
  
From: histonet-boun...@lists.utsouthwestern.edu 
[histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Fredrickson, Mona 
[mfredrick...@nrh-ok.com]
Sent: Wednesday, July 07, 2010 1:03 PM
To: Histonet@lists.utsouthwestern.edu
Subject: [Histonet] (no subject)

Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able to 
pass the HT exam and now is no longer eligible to thake the test because he has 
to get his associates degree in science.  The lab management wants to change 
his title from histotech eligible to histotech non-registered without pay 
increase.  But I feel the pay should be increased. So I would appreciate 
comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma

CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may
contain confidential and privileged information for the use
of the designated recipients named above. If you are not
the intended recipient, you are hereby notified that you
have received this communication in error and that any
review, disclosure, dissemination, distribution, or copying
of it or its contents is prohibited. If you have received
this communication in error, please notify the sender
immediately and destroy all copies of this communication
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
THIS MESSAGE IS CONFIDENTIAL.  
This e-mail message and any attachments are proprietary and confidential 
information intended only for the use of the recipient(s) named above. If you 
are not the intended recipient, you may not print,distribute, or copy this 
message or any attachments.  If you have received this communication in error, 
please notify the sender by return e-mail and delete this message and any 
attachments from your computer. Any views or opinions expressed are solely 
those of the author and do not necessarily represent those of LRGHealthcare.


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] QC log

2010-07-07 Thread Gill, Caula A.
This is the QC sheet we use and the Pathologist documents any issues
there may be if any. 

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Scott,
Allison D
Sent: Wednesday, July 07, 2010 12:26 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] QC log

Hello to all in histoland.  Does anyone have a QC log sheet that
documents the H&E stain, microtomy, floaters and other issues that they
would be willing to share with me.  Any help in this matter will be
greatly appreciated.
 
 
Allison Scott HT(ASCP)
Histology Supervisor
LBJ Hospital
Houston, Texas 77026
 
CONFIDENTIALITY NOTICE:
If you have received this e-mail in error, please immediately notify the
sender by return e-mail and delete this e-mail and any attachments from
your computer system.

To the extent the information in this e-mail and any attachments contain
protected health information as defined by the Health Insurance
Portability and Accountability Act of 1996 ("HIPAA"), PL 104-191; 45 CFR
Parts 160 and 164; or Chapter 181, Texas Health and Safety Code, it is
confidential and/or privileged.  This e-mail may also be confidential
and/or privileged under Texas law.  The e-mail is for the use of only
the individual or entity named above.  If you are not the intended
recipient, or any authorized representative of the intended recipient,
you are hereby notified that any review, dissemination or copying of
this e-mail and its attachments is strictly prohibited.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Re: [Histonet] (no subject)

2010-07-07 Thread Jackie M O'Connor
Ask management if he would suddenly be a better technician and more 
valuable if he passed the exam?   Duh - no.   In my opinion, merit 
increases should be based on merit - not documentation. 
If he's not eligible, he's not eligible.  Does your management increase 
pay based on certification?   So, if a certified tech with one year of 
experience came to your lab, they would be paid more than an incumbent 
tech with 8 years experience?  Sounds like you have some dinosaur 
management there. 



From:
"Fredrickson, Mona" 
To:
"Histonet@lists.utsouthwestern.edu" 
Date:
07/07/2010 12:04 PM
Subject:
[Histonet] (no subject)
Sent by:
histonet-boun...@lists.utsouthwestern.edu



Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able 
to pass the HT exam and now is no longer eligible to thake the test 
because he has to get his associates degree in science.  The lab 
management wants to change his title from histotech eligible to histotech 
non-registered without pay increase.  But I feel the pay should be 
increased. So I would appreciate comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may 
contain confidential and privileged information for the use 
of the designated recipients named above. If you are not 
the intended recipient, you are hereby notified that you 
have received this communication in error and that any 
review, disclosure, dissemination, distribution, or copying 
of it or its contents is prohibited. If you have received 
this communication in error, please notify the sender 
immediately and destroy all copies of this communication 
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] (no subject)

2010-07-07 Thread Fredrickson, Mona
Hello All in Histoland,
I have a tech who is employed as Histotech eligible, but he was not able to 
pass the HT exam and now is no longer eligible to thake the test because he has 
to get his associates degree in science.  The lab management wants to change 
his title from histotech eligible to histotech non-registered without pay 
increase.  But I feel the pay should be increased. So I would appreciate 
comments on the following:
1.) should title be changed from eligible to non-registered?
2.) After having done this for 8 years should his pay stay the same?
3. Should job responsibilities remain the same
 Thank you in advance for feedback!
Histotech in Oklahoma



CONFIDENTIALITY NOTICE:
This e-mail communication and any attachments may
contain confidential and privileged information for the use
of the designated recipients named above. If you are not
the intended recipient, you are hereby notified that you
have received this communication in error and that any
review, disclosure, dissemination, distribution, or copying
of it or its contents is prohibited. If you have received
this communication in error, please notify the sender
immediately and destroy all copies of this communication
and any attachments.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] RE: gout crystals

2010-07-07 Thread Connolly, Brett M
See these articles- keep formalin fixation to <12 hrs.

Vinod Shidham, Ganesh Shidham (2000) Staining Method to Demonstrate
Urate Crystals in Formalin-Fixed, Paraffin-Embedded Tissue Sections.
Archives of Pathology & Laboratory Medicine: Vol. 124, No. 5, pp.
774-776. 

Shidham V, Chivukula M, Basir Z, Shidham G. Mod Pathol. 2001
Aug;14(8):806-10. 

Brett M. Connolly, Ph.D.
Molecular Imaging Team Leader
Merck & Co., Inc.
PO Box 4, WP-44K
West Point, PA 19486
tel. 215-652-2501 fax. 215-993-6803
brett_conno...@merck.com





-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of HOOD MS.
GLENDA
Sent: Wednesday, July 07, 2010 12:39 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] RE: gout crystals

It is true that gout crystals are water-soluble, and we are all taught
that... but a few years ago there was a published article (JOH??) that
showed that many crystals DO survive after water-based fixation. Since
you already have the specimen in formalin, at least try processing and
see if they can be demonstrated. Couldn't hurt, not nearly as much as
the patient would for a re-biopsy!

Glenda F. Hood, M.Ed., HT(ASCP)
Instructor and Program Director
Histotechnology Program
Tarleton State University
817-926-1101 x6



-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of
histonet-requ...@lists.utsouthwestern.edu
Sent: Wednesday, July 07, 2010 11:22 AM
To: histonet@lists.utsouthwestern.edu
Subject: Histonet Digest, Vol 80, Issue 7

Send Histonet mailing list submissions to
histonet@lists.utsouthwestern.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
or, via email, send a message with subject or body 'help' to
histonet-requ...@lists.utsouthwestern.edu

You can reach the person managing the list at
histonet-ow...@lists.utsouthwestern.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Histonet digest..."


Today's Topics:

   1. Rnase free slides? (Caroline Bass)
   2. Gout Crytals (Behnaz Sohrab)
   3. RE: Gout Crytals (Weems, Joyce)
   4. Re: Gout Crytals (Jennifer MacDonald)
   5. RE: Gout Crytals (sgoe...@xbiotech.com)
   6. Schmitz, Sandy is out of the office.
  (sandy.schm...@leica-microsystems.com)
   7. RE: Gout Crytals (Joyce Cline)
   8. Re: bat wing histology (Mohit Chadha)
   9. RE: Gout Crytals (Douglas,Joseph)
  10. used histology equipment (dcoj...@tampabay.rr.com)
  11. Re: used histology equipment (Drew Meyer)
  12. Re: Rnase free slides? (Emily Sours)
  13. Re: bat wing histology (Amos Brooks)
  14. Has anyone used a biotin block in their antibody diluent?
  (Jennifer Campbell)
  15. Biotin block (Jim Reilly)
  16. RE: Has anyone used a biotin block in their antibody  diluent?
  (Mauger, Joanne)
  17. Re: used histology equipment (kim.dona...@bhcpns.org)
  18. RE: used histology equipment (Douglas,Joseph)
  19. RE: used histology equipment (Douglas,Joseph)
  20. Reprocess (sgoe...@xbiotech.com)
  21. Re: Reprocess (Catherine Simonson)
  22. RE: Reprocess (Cheri Miller)
  23. RE: Reprocess (Cheri Miller)
  24. RE: Reprocess (Mahoney,Janice A)


--

Message: 1
Date: Tue, 06 Jul 2010 15:49:58 -0400
From: Caroline Bass 
Subject: [Histonet] Rnase free slides?
To: 
Message-ID: 
Content-Type: text/plain;   charset="US-ASCII"

Hello,

I'm doing RNA work for the first time. My plan is to take a fresh rat
brain,
block quickly, freeze by immersing in dry-ice cooled isopentane, storing
at
-80, collecting tissue sections (thickness will be determined, somewhere
between 20 and 300 um), and punching the particular regions I need out
of
the sections. I will then isolate RNA from the punches for qPCR
analysis.

Questions:

1) does this sound like a viable plan?
2) and suggestions, what to be careful of?
3) where do I have to be careful of Rnase, should I use disposable
blades,
cleaned with Rnase away?
4) where can I find Rnase free slides, or should I just make my own. I
usually use charged slides.

Any and all suggestions will be appreciated. I'm new to this and don't
know
where I will have problems.

Thanks!

Caroline




--

Message: 2
Date: Tue, 06 Jul 2010 13:12:49 -0700
From: "Behnaz Sohrab" 
Subject: [Histonet] Gout Crytals
To: 
Message-ID: <4c332bd0.4347.005...@ah.org>
Content-Type: text/plain; charset=US-ASCII

Please refresh my memory!! Processing For Gout Crystal !1 Do I skip all
alcohols? Tissue has been fixed in formalin.?
Thank you


--

Message: 3
Date: Tue, 6 Jul 2010 16:35:41 -0400
From: "Weems, Joyce" 
Subject: RE: [Histonet] Gout Crytals
To: Behnaz Sohrab ,
"histonet@lists.utsouthwestern.edu"

Message-ID:
 
<92ad9b20a6c3

RE: [Histonet] Reprocess

2010-07-07 Thread Mahoney,Janice A
Cheri's process is a good one, we use it too.  Works every time.
Jan Mahoney
Omaha, NE

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of 
sgoe...@xbiotech.com
Sent: Wednesday, July 07, 2010 10:37 AM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Reprocess


   Hello  all!!  Hope everyone had a happy 4th!!  Question =day is...I
   grossed  in  some  fat  that I need to routine process.  I ha= done
   this  in  the  past  with  extra fixation and no problem?  This tim=
   however  it didn't fix all the way through and I have oily unfixed fat
   in  =e  middle  of  my  block.  I fixed for 48 hours, but guess my
   section  we=  too big and needed more.  I want to fix for a little
   longer  and rep=cess the block.  I know I need to melt it down, but
   then  what? =ave done this before, it's just my brain is getting
   older =)

   Thanks in advance!!

   Sarah Goebel, B.A., HT (=CP)

   Histotechnician

   XBiotech USA Inc.


   8201 East Riverside Dr. Bldg 4 Suite 100

   Austin, Texas  78744

   (512)386-5107
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Sponsored by Catholic Health Initiatives and Immanuel, Alegent Health is 
faithful to the healing ministry of Jesus Christ, providing high quality care 
for the body, mind and spirit of every person.

The information contained in this communication, including attachments, is 
confidential and private and intended only for the use of the addressees.  
Unauthorized use, disclosure, distribution or copying is strictly prohibited 
and may be unlawful.  If you received this communication in error, please 
inform us of the erroneous delivery by return e-mail message from your 
computer.  Additionally, although all attachments have been scanned at the 
source for viruses, the recipient should check any attachments for the presence 
of viruses before opening.  Alegent Health accepts no liability for any damage 
caused by any virus transmitted by this e-mail.  Thank you for your cooperation.
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] RE: gout crystals

2010-07-07 Thread HOOD MS. GLENDA
It is true that gout crystals are water-soluble, and we are all taught that... 
but a few years ago there was a published article (JOH??) that showed that many 
crystals DO survive after water-based fixation. Since you already have the 
specimen in formalin, at least try processing and see if they can be 
demonstrated. Couldn't hurt, not nearly as much as the patient would for a 
re-biopsy!

Glenda F. Hood, M.Ed., HT(ASCP)
Instructor and Program Director
Histotechnology Program
Tarleton State University
817-926-1101 x6



-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of 
histonet-requ...@lists.utsouthwestern.edu
Sent: Wednesday, July 07, 2010 11:22 AM
To: histonet@lists.utsouthwestern.edu
Subject: Histonet Digest, Vol 80, Issue 7

Send Histonet mailing list submissions to
histonet@lists.utsouthwestern.edu

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
or, via email, send a message with subject or body 'help' to
histonet-requ...@lists.utsouthwestern.edu

You can reach the person managing the list at
histonet-ow...@lists.utsouthwestern.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Histonet digest..."


Today's Topics:

   1. Rnase free slides? (Caroline Bass)
   2. Gout Crytals (Behnaz Sohrab)
   3. RE: Gout Crytals (Weems, Joyce)
   4. Re: Gout Crytals (Jennifer MacDonald)
   5. RE: Gout Crytals (sgoe...@xbiotech.com)
   6. Schmitz, Sandy is out of the office.
  (sandy.schm...@leica-microsystems.com)
   7. RE: Gout Crytals (Joyce Cline)
   8. Re: bat wing histology (Mohit Chadha)
   9. RE: Gout Crytals (Douglas,Joseph)
  10. used histology equipment (dcoj...@tampabay.rr.com)
  11. Re: used histology equipment (Drew Meyer)
  12. Re: Rnase free slides? (Emily Sours)
  13. Re: bat wing histology (Amos Brooks)
  14. Has anyone used a biotin block in their antibody diluent?
  (Jennifer Campbell)
  15. Biotin block (Jim Reilly)
  16. RE: Has anyone used a biotin block in their antibody  diluent?
  (Mauger, Joanne)
  17. Re: used histology equipment (kim.dona...@bhcpns.org)
  18. RE: used histology equipment (Douglas,Joseph)
  19. RE: used histology equipment (Douglas,Joseph)
  20. Reprocess (sgoe...@xbiotech.com)
  21. Re: Reprocess (Catherine Simonson)
  22. RE: Reprocess (Cheri Miller)
  23. RE: Reprocess (Cheri Miller)
  24. RE: Reprocess (Mahoney,Janice A)


--

Message: 1
Date: Tue, 06 Jul 2010 15:49:58 -0400
From: Caroline Bass 
Subject: [Histonet] Rnase free slides?
To: 
Message-ID: 
Content-Type: text/plain;   charset="US-ASCII"

Hello,

I'm doing RNA work for the first time. My plan is to take a fresh rat brain,
block quickly, freeze by immersing in dry-ice cooled isopentane, storing at
-80, collecting tissue sections (thickness will be determined, somewhere
between 20 and 300 um), and punching the particular regions I need out of
the sections. I will then isolate RNA from the punches for qPCR analysis.

Questions:

1) does this sound like a viable plan?
2) and suggestions, what to be careful of?
3) where do I have to be careful of Rnase, should I use disposable blades,
cleaned with Rnase away?
4) where can I find Rnase free slides, or should I just make my own. I
usually use charged slides.

Any and all suggestions will be appreciated. I'm new to this and don't know
where I will have problems.

Thanks!

Caroline




--

Message: 2
Date: Tue, 06 Jul 2010 13:12:49 -0700
From: "Behnaz Sohrab" 
Subject: [Histonet] Gout Crytals
To: 
Message-ID: <4c332bd0.4347.005...@ah.org>
Content-Type: text/plain; charset=US-ASCII

Please refresh my memory!! Processing For Gout Crystal !1 Do I skip all 
alcohols? Tissue has been fixed in formalin.?
Thank you


--

Message: 3
Date: Tue, 6 Jul 2010 16:35:41 -0400
From: "Weems, Joyce" 
Subject: RE: [Histonet] Gout Crytals
To: Behnaz Sohrab ,
"histonet@lists.utsouthwestern.edu"

Message-ID:
<92ad9b20a6c38c4587a9febe3a30e164015e968...@chexcms10.one.ads.che.org>
Content-Type: text/plain; charset="us-ascii"

Should skip the formalin!!! They are water soluable... :>(

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Behnaz Sohrab
Sent: Tuesday, July 06, 2010 16:13
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Gout Crytals

Please refresh my memory!! Processing For Gout Crystal !1 Do I skip all 
alcohols? Tissue has been fixed in formalin.?
Thank you
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Confidentiality Notice:
This e-mail, including any attachments is the

[Histonet] QC log

2010-07-07 Thread Scott, Allison D
Hello to all in histoland.  Does anyone have a QC log sheet that
documents the H&E stain, microtomy, floaters and other issues that they
would be willing to share with me.  Any help in this matter will be
greatly appreciated.
 
 
Allison Scott HT(ASCP)
Histology Supervisor
LBJ Hospital
Houston, Texas 77026
 
CONFIDENTIALITY NOTICE:
If you have received this e-mail in error, please immediately notify the
sender by return e-mail and delete this e-mail and any attachments from 
your computer system.

To the extent the information in this e-mail and any attachments contain 
protected health information as defined by the Health Insurance Portability 
and Accountability Act of 1996 ("HIPAA"), PL 104-191; 45 CFR Parts 160 and 
164; or Chapter 181, Texas Health and Safety Code, it is confidential and/or 
privileged.  This e-mail may also be confidential and/or privileged under 
Texas law.  The e-mail is for the use of only the individual or entity named 
above.  If you are not the intended recipient, or any authorized 
representative of the intended recipient, you are hereby notified that any 
review, dissemination or copying of this e-mail and its attachments is 
strictly prohibited.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] Reprocess

2010-07-07 Thread Cheri Miller
I take that back I do melt them, recap the cassettes and then drop them in to 
clean.

Cheryl A. Miller HT(ASAP)cm
Histology/Cytology Prep Supervisor
Physicians Laboratory Services
Omaha, NE. 402 731 4145 ext. 554

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Cheri Miller
Sent: Wednesday, July 07, 2010 10:53 AM
To: sgoe...@xbiotech.com; histonet@lists.utsouthwestern.edu
Subject: RE: [Histonet] Reprocess

Hi Sarah, I don't melt them down I just drop them in with my dirty molds and 
lids and run them through the cleaning cycle on my processor. The Xylene and 
Alcohol will melt the oily fat. When the clean cycle is complete I just drop 
them back into formalin until I process that evening. It works very well.


Cheryl A. Miller HT(ASAP)cm
Histology/Cytology Prep Supervisor
Physicians Laboratory Services
Omaha, NE. 402 731 4145 ext. 554

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of 
sgoe...@xbiotech.com
Sent: Wednesday, July 07, 2010 10:37 AM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Reprocess


   Hello  all!!  Hope everyone had a happy 4th!!  Question =day is...I
   grossed  in  some  fat  that I need to routine process.  I ha= done
   this  in  the  past  with  extra fixation and no problem?  This tim=
   however  it didn't fix all the way through and I have oily unfixed fat
   in  =e  middle  of  my  block.  I fixed for 48 hours, but guess my
   section  we=  too big and needed more.  I want to fix for a little
   longer  and rep=cess the block.  I know I need to melt it down, but
   then  what? =ave done this before, it's just my brain is getting
   older =)

   Thanks in advance!!

   Sarah Goebel, B.A., HT (=CP)

   Histotechnician

   XBiotech USA Inc.


   8201 East Riverside Dr. Bldg 4 Suite 100

   Austin, Texas  78744

   (512)386-5107
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

PRIVILEGED / CONFIDENTIAL INFORMATION may be contained in this message.  If you 
are not the addressee intended / indicated or agent responsible for delivering 
it to the addressee, you are hereby notified that you are in possession of 
confidential and privileged information.  Any dissemination, distribution, or 
copying of this e-mail is strictly prohibited.  If you have received this 
message in error, please notify the sender immediately and delete this email 
from your system.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

PRIVILEGED / CONFIDENTIAL INFORMATION may be contained in this message.  If you 
are not the addressee intended / indicated or agent responsible for delivering 
it to the addressee, you are hereby notified that you are in possession of 
confidential and privileged information.  Any dissemination, distribution, or 
copying of this e-mail is strictly prohibited.  If you have received this 
message in error, please notify the sender immediately and delete this email 
from your system.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] Reprocess

2010-07-07 Thread Cheri Miller
Hi Sarah, I don't melt them down I just drop them in with my dirty molds and 
lids and run them through the cleaning cycle on my processor. The Xylene and 
Alcohol will melt the oily fat. When the clean cycle is complete I just drop 
them back into formalin until I process that evening. It works very well.


Cheryl A. Miller HT(ASAP)cm
Histology/Cytology Prep Supervisor
Physicians Laboratory Services
Omaha, NE. 402 731 4145 ext. 554

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of 
sgoe...@xbiotech.com
Sent: Wednesday, July 07, 2010 10:37 AM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Reprocess


   Hello  all!!  Hope everyone had a happy 4th!!  Question =day is...I
   grossed  in  some  fat  that I need to routine process.  I ha= done
   this  in  the  past  with  extra fixation and no problem?  This tim=
   however  it didn't fix all the way through and I have oily unfixed fat
   in  =e  middle  of  my  block.  I fixed for 48 hours, but guess my
   section  we=  too big and needed more.  I want to fix for a little
   longer  and rep=cess the block.  I know I need to melt it down, but
   then  what? =ave done this before, it's just my brain is getting
   older =)

   Thanks in advance!!

   Sarah Goebel, B.A., HT (=CP)

   Histotechnician

   XBiotech USA Inc.


   8201 East Riverside Dr. Bldg 4 Suite 100

   Austin, Texas  78744

   (512)386-5107
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

PRIVILEGED / CONFIDENTIAL INFORMATION may be contained in this message.  If you 
are not the addressee intended / indicated or agent responsible for delivering 
it to the addressee, you are hereby notified that you are in possession of 
confidential and privileged information.  Any dissemination, distribution, or 
copying of this e-mail is strictly prohibited.  If you have received this 
message in error, please notify the sender immediately and delete this email 
from your system.

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Re: [Histonet] Reprocess

2010-07-07 Thread Catherine Simonson
Easy option is to melt down, and run cassettes through the clean cycle on
your processors to remove all the paraffin.  then process as usual.  I've
done this before with decent results.

Good luck!
Catherine

On Wed, Jul 7, 2010 at 11:36 AM,  wrote:

>
>   Hello  all!!  Hope everyone had a happy 4th!!  Question  today is...I
>   grossed  in  some  fat  that I need to routine process.  I ha ve done
>   this  in  the  past  with  extra fixation and no problem?  This tim e
>   however  it didn't fix all the way through and I have oily unfixed fat
>   inthe  middle  of  my  block.  I fixed for 48 hours, but guess my
>   section  we  re  too big and needed more.  I want to fix for a little
>   longer  and rep rocess the block.  I know I need to melt it down, but
>   then  what?   I  have done this before, it's just my brain is getting
>   older =)
>
>   Thanks in advance!!
>
>   Sarah Goebel, B.A., HT ( ASCP)
>
>   Histotechnician
>
>   XBiotech USA Inc.
>
>
>   8201 East Riverside Dr. Bldg 4 Suite 100
>
>   Austin, Texas  78744
>
>   (512)386-5107
> ___
> Histonet mailing list
> Histonet@lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Reprocess

2010-07-07 Thread sgoebel

   Hello  all!!  Hope everyone had a happy 4th!!  Question = today is...I
   grossed  in  some  fat  that I need to routine process.  I ha= ve done
   this  in  the  past  with  extra fixation and no problem?  This tim= e
   however  it didn't fix all the way through and I have oily unfixed fat
   in  =  the  middle  of  my  block.  I fixed for 48 hours, but guess my
   section  we=  re  too big and needed more.  I want to fix for a little
   longer  and rep= rocess the block.  I know I need to melt it down, but
   then  what? =  I  have done this before, it's just my brain is getting
   older =)

   Thanks in advance!!

   Sarah Goebel, B.A., HT (= ASCP)

   Histotechnician
   
   XBiotech USA Inc.

   
   8201 East Riverside Dr. Bldg 4 Suite 100

   Austin, Texas  78744

   (512)386-5107
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] used histology equipment

2010-07-07 Thread Douglas,Joseph
REMOVE FROM DATABASE

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of 
kim.dona...@bhcpns.org
Sent: Wednesday, July 07, 2010 8:37 AM
To: dcoj...@tampabay.rr.com
Cc: 'histonet'; histonet-boun...@lists.utsouthwestern.edu
Subject: Re: [Histonet] used histology equipment

Hi Diane, 
Because of your location I would recommend 
Micro-optics of Florida. Mike Jones or Tom Christy. The number is 
954-791-0082. They are great people to work with and I have found them 
very reasonable on their prices. 

Hope this helps!



Kim Donadio 
Pathology Supervisor
Baptist Hospital
1000 W Moreno St.
Pensacola FL 32501
Phone (850) 469-7718
Fax (850) 434-4996



 
Sent by: histonet-boun...@lists.utsouthwestern.edu
07/06/2010 05:29 PM

To
"'histonet'" 
cc

Subject
[Histonet] used histology equipment






Does anyone know of a reputable dealer for used equipment?

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



-
All electronic data transmissions originating from or sent to
Baptist Health Care Corporation (BHC) are subject to monitoring.
This message along with any attached data, are the confidential and
proprietary communications of BHC and are intended to be received
only by the individual or individuals to whom the message has been
addressed. If the reader of this message is not the intended
recipient, please take notice that any use, copying, printing,
forwarding or distribution of this message, in any form, is
strictly prohibited and may violate State or Federal Law. If you
have received this transmission in error, please delete or destroy
all copies of this message.  For questions, contact the BHC Privacy
Officer at (850) 434-4472.  Rev.10/07.
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


RE: [Histonet] used histology equipment

2010-07-07 Thread Douglas,Joseph
REMOVE FROM DATABASE

-Original Message-
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Drew Meyer
Sent: Tuesday, July 06, 2010 5:56 PM
To: dcoj...@tampabay.rr.com
Cc: histonet
Subject: Re: [Histonet] used histology equipment

Absolutely... Southeast Pathology Instrument Service out of Charleston, SC.
The owner's name is Michael Dietrich.  I've done business with him before
and they are great people, very honest and they stand behind their
instruments.  I would highly recommend them to anyone.  Contact Michael
directly and tell him Drew Meyer from Atlanta referred you.

http://southeastpathology.com/

Drew

On Tue, Jul 6, 2010 at 18:29,  wrote:

> Does anyone know of a reputable dealer for used equipment?
>
> ___
> Histonet mailing list
> Histonet@lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


Re: [Histonet] used histology equipment

2010-07-07 Thread Kim . Donadio
Hi Diane, 
Because of your location I would recommend 
Micro-optics of Florida. Mike Jones or Tom Christy. The number is 
954-791-0082. They are great people to work with and I have found them 
very reasonable on their prices. 

Hope this helps!



Kim Donadio 
Pathology Supervisor
Baptist Hospital
1000 W Moreno St.
Pensacola FL 32501
Phone (850) 469-7718
Fax (850) 434-4996



 
Sent by: histonet-boun...@lists.utsouthwestern.edu
07/06/2010 05:29 PM

To
"'histonet'" 
cc

Subject
[Histonet] used histology equipment






Does anyone know of a reputable dealer for used equipment?

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



-
All electronic data transmissions originating from or sent to
Baptist Health Care Corporation (BHC) are subject to monitoring.
This message along with any attached data, are the confidential and
proprietary communications of BHC and are intended to be received
only by the individual or individuals to whom the message has been
addressed. If the reader of this message is not the intended
recipient, please take notice that any use, copying, printing,
forwarding or distribution of this message, in any form, is
strictly prohibited and may violate State or Federal Law. If you
have received this transmission in error, please delete or destroy
all copies of this message.  For questions, contact the BHC Privacy
Officer at (850) 434-4472.  Rev.10/07.
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] RE: Has anyone used a biotin block in their antibody diluent?

2010-07-07 Thread Mauger, Joanne
Jennifer,
Vector has an avidin-biotin blocking kit that works well by itself or mixed 
with reagents- very reasonable cost.
Jo

Joanne Mauger HT(ASCP)QIHC
Children's Hospital of Philadelphia

From: histonet-boun...@lists.utsouthwestern.edu 
[histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Jennifer Campbell 
[jcampb...@vdxpathology.com]
Sent: Tuesday, July 06, 2010 10:11 PM
To: histonet@lists.utsouthwestern.edu
Subject: [Histonet] Has anyone used a biotin block in their antibody diluent?

Hi All,

 Has anyone ever used a Biotin block in their primary anitbody diluent?  I have 
been having problems with nonspecific staining, which I suspect is due to 
endogenous biotin.  I plan on decreasing my antigen retrieval time, as someone 
has told me that an antigen retrieval that is too vigorous may cause the 
unmasking of biotin, and its subsequent staining. I would like to know if 
anyone has had any luck using a biotin block in their diluent because I may try 
that as well.

Thanks,

Jennifer Campbell
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


[Histonet] Biotin block

2010-07-07 Thread Jim Reilly
Hello Jennifer

I use the Avidin/Biotin blocking kit from Vector SP-2001  I mix the
Avidin D with my normal blocking serum and the biotin I add to my
primary antibody diluent. This seems to work well for most tissue types.

Cheers

Jim

___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet