PSCP
Hello, A user is trying to pscs from his pc to his Linux account. This is what he gets: D:\PROGRAM FILES\PUTTY>PSCP -V u...@xxx.xxx.xx.xxx:JPAS_*.ZIP U:\TEMP LOOKING U P HOST "XXX.XXX.XX.XXX" CONNECTING TO XXX.XXX.XX.XXX PORT 22 Server version: SSH-1.99-OpenSSH_4.2 We claim version: SSH-1.5-PuTTY-Release-0.53b Using SSH protocol version 1 Rece ived public keys Host key fingerprint is: 1024 e0:df:92:7b:16:8f:48:f3:de:96:45:35:c0:4d:70:e3 Encrypted session key AES not supported in SSH1, skipping Using Blowfish encryption Trying to enable encryption... Successfully started encryption Sent username "aces" u...@xxx.xxx.xx.xxx's password: BTW He hasn't had any problem doing a regular ssh to his Linux account Has anyone encountered this problem? If so, what did you do to fix it? Thanks for your help, Alyce
Anne Altman...
Hello, I would like to get in touch with Anne K. Altman, General Manager, System Z IBM Systems and Techology Group. Can someone please send me her contact information? Thank you, Alyce Austin Naval Postgraduate School
SLES10 IPL...
Hello, Unfortunately, I have forgotten the root password for my test system SLES10 SP2. I tried to bring it up in single mode to recover the root password, but I didn't see the runlevel option for single mode during the IPL. Has anyone try to ipl is single mode to reset the root password? Any suggestions would be appreciated. Thanks for your support, Alyce
Spoolchn
Hello, I am running Spoolchn on my current z/vm 5.2. I went to the download page to check if there was a new version for 5.4. I didn't see a new one. I assume that the version I am running on 5.2 will also work on 5.4...Am I correct? Thanks for your help, Alyce
HCPSADMP
Hello, In the z/VM 5.4 Guide for Automated Installation and Service, it recommends creating at Stand-Alone Dump tape on page 145. For instructions, it says to see the z/VM: CP Planning and Administration. On page 414, it says certain files must exist before using the HCPSADMP EXEC to create a Stand-Alone Dump Tape. I can locate all the files except "HCPVM CNTRL". Does anyone know where this file lives? Thanks for your support, Alyce
Yast Installation Settings
HELLO AGAIN, I'M BACK TO MY SLES10 PROJECT...(5.4) ON PAGE 124 OF THE VIRTUALIZATION COOKBOOK FOR SLES10, IT SAYS IN THE "INSTALLATION SETTINGS" WINDOW, TO SELECT "SOFTWARE" AND LEAVE ONLY "SERVER BASE SYSTEM" SELECTED. WHEN I SELECT "SOFTWARE", THE SOFTWARE SELECTION WINDOW DOES NOT APPEAR AS SHOWN ON PAGE 125. SO, I CLICK ON ACCEPT AND THE AGFA FONTS LICENSE APPEARS AND I ACCEPT IT. HOWEVER, ALL 800 PLUS SOFTWARE PACKAGES BEGIN TO INSTALL... I TRIED TO TAB TO "ABORT" BUT I COULDN'T; NEEDLESS TO SAY, I RAN OUT OF SPACE... AND HAD TO FORCE USER SLES10S2. IS ANYONE ELSE HAVING A PROBLEM WITH THE SOFTWARE SELECTION WINDOW APPEARING UNDER YAST SO THAT ONLY THE "sERVER BASE SYSTEM" CAN BE SELECTED? THANKS FOR YOUR SUPPORT, ALYCE
YAST
HELLO, ON P. 121 (STEP 15) OF THE "VIRTUALIZATION COOKBOOK FOR SLES 10 SP2, IT SAYS TO CREATE A SECOND PARTITION, CLICK CREATE AND CHOOSE /DEV/DASDA AGAIN... WHEN I DO THAT, IT SAYS THAT IT CANNOT BE PARTITIONED. AM I DOING SOMETHING WRONG; OR, IS THE DOCUMENTATOIN CORRECT? IN A STEP 14, IT SAYS TO CHOOSE A SIZE OF 384MB FOR DASDA; HOWEVER IT WAS NOT HAPPY WITH THE SIZE, BUT I REPLY "YES" ANYWAY... HAS ANYONE ELSE ENCOUNTER THIS PROBLEM? THANKS FOR YOUR SUPPORT, ALYCE
SLES10 Client
HELLO, I HAVE SUCCESSFULLY IMPLEMENTED THE STARTER SYSTEM FOR SLES10. I'M PREPARING TO IMPLEMENT THE "FULL-SERVICE SERVER"/CLIENT). ON PAGE 31 OF THE "STARTER SYSTEM", IT SAYS TO USE THE SAME NETWORK ADDRESS OF THE STARTER SYSTEM FOR THE CLIENT SYSTEM. I ASSUME THIS MEANS THAT I NEED TO TAKE DOWN THE NOVSTART SYSTEM AND USE ITS IP ADDR THAT IS DEFINED IN THE NETWORK PARMS FILE FOR MY CLIENT SYSTEM. IS THIS CORRECT? OR, CAN I USE A DIFFERENT IP FOR THE CLIENT SYSTEM? THANK YOU FOR YOUR SUPPORT, ALYCE
Network-SLES10
Hello, I'm am using network device QDIOETHERNET: OSA-Gigabit Ethernet with my OSA device addresses (E000-E002) dedicated to NOVSTART in my directory. When I IPL the SLES10 starter system, I get the following message: (It doesn't give me the choice to choose '3' as my network device.) Checking for network time protocol daemon (NTPD): ..unused 1A..doneWaiting for mandatory devices: qeth-bus-ccw-0.0.0340 __NSC__ 8 7 6 5 4 3 2 0 qeth-bus-ccw-0.0.0340 No interface found 1A..failed Setting up service network . . . . . . . . . . . . . . . ...fai l Starting slpd ..done Starting syslog services Importing Net File System (NFS)..unused Starting nfsboot (sm-notify) ..done Mount SMB/ CIFS File Systems ..unused Starting mail service (Postfix)..failed Starting kernel based NFS server Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). Starting Samba SMB daemon ..done NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ..done Sep 17 13:07:54 131 kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 st a Sep 17 13:07:54 131 kernel: NFSD: starting 90-second grace period Starting CRON daemon ..done Starting httpd2 (prefork) Starting rewritenet ..done Starting SSH daemon..done Executing suseRegister (looking for new update channels): ..skipped httpd2-prefork: Could not reliably determine the server's fully qualified domai n Failed services in runlevel 3: 80C 22Dnetwork postfix Skipped services in runlevel 3: 80C 36Dnfs smbfs splash suseRegister Welcome to SUSE Linux Enterprise Server 10 SP2 (s390x) - Kernel 2.6.16.60-0.21- d 131 login: Is there a statement I need to add to the profile exec on NOVSTART to implement the network connectivity? (The exec doesn't give me a choice to choose which network device I am using.) Thanks for your help, Alyce
Starter SLES10
Hello, I'm following the instructions in the SUSE Linux Ent Serv Starter System manual dated July 2, 2008. On page 14, Step 13, I issued the command to restore the nov191 diskimg file to novstart 191. Ready; T=0.02/0.03 14:01:28 flist Ready; T=0.01/0.01 14:01:40 cmsddr restore f191 nov191 diskimg a 46 +++ nr_cyls=nr_cyls-1 /* Minus 1 because of startcyl = 0 */ DMSREX476E Error 41 running CMSDDR EXEC, line 46: Bad arithmetic conversion Ready(20041); T=0.01/0.01 14:03:00 Has anyone else gotten this error? If so, what did you do to fix it? Thanks for your support, Alyce
SMTP Resolving...
Hello, When I use the "smsg smtp listmail all" command, I see some files that are in "Resolving" state: From SMTP: 3286 @1 Resolving * From SMTP: 3324 @1 Resolving * From SMTP: 3378 @1 Resolving * From SMTP: 3782 @1 Resolving * From SMTP: 3802 @1 Resolving When I try to purge them using the "smsg smtp pu ", I get the following response: smsg smtp pu 3286 Ready; T=0.01/0.01 15:41:55 * From SMTP: Mail Id 3286 cannot be purged because Mail State is invalid. Is there another command to delete these files? Thanks for your support, Alyce
Linux Commands
Does a manual exists that has all the SuSE Linux commands listed running on the Z series with really good examples? Thanks for your support, Alyce
z/VM 5.2 EOS?
Hello, Is the "End of Service" date for z/VM 5.2 still 30 April 2009? If so, are they plans to extend the date? Thanks, Alyce
RACF MSGS
Hello, Yesterday during an IPL, I notice some RACF warning messages fly by... When I look in my operator's console file, I don't see them. Are they being captured automatically? If so, where are they being sent? Thanks for your support, Alyce
2nd Level IPL
HELLO, I HAVE DDR COPIED AND RELABELED ALL OF MY Z/VM 5.2 SYSTEM DISKS TO NEW VOLUMES AND NEW ADDRESSES. I ALSO COPIED THE 520RES VOLUME TO A NEW ADDRESS AND RELABELED IT AS 520XXX TO MAKE IT UNIQUE. I PLAN TO IPL MY 520XXX VOLUME SECOND LEVEL POINTING TO MY NEW SYSTEMX CONFIG FILE WHICH POINTS TO THE NEW VOLUMES. I ASSUME I CAN IPL SECOND LEVEL WITH MY NEW NAME 520XXX; OR, DOES IT EXPECT TO SEE 520RES AS THE IPL VOLUME NAME? THANKS FOR YOUR HELP, ALYCE
CA VMBACKUP
Hello, If anyone is using VMBACKUP to backup and restore volumes, are you including the RES and SPOOL volumes too? Thanks, Alyce
[no subject]
Hello, I notice that PERFSVM A DISK fills up rather quickly. Does it automatically "role-over" when it gets to a certain percentage? If not, what is the best way to "clean it up"? Which files are OK to delete and still keep it running? Thanks for your help, Alyce
DDRCOPY
Hello, I did a DDRCOPY of my z/VM 5.2 test system before bringing it up into production mode and re-labeled the new volumes including the RES volume. I created another system config called "systeml config" as well with the new volume names. I would like to IPL this additional z/VM 5.2 system in another LPAR to use for the Linux environment using fn=systeml on the sapl screen. I assume that the last directory I wrote out before doing the DDRCOPY is still intact and that it will be the one that is brought on-line at IPL time. Is this the case? Thanks for your support, Alyce
Operator
Hello, I need to increase the size of my Operator 191 disk. Does it have to be on the res volume? Thanks for your support, Alyce
PERFSVM
Hello, I implemented the steps defined in the PD to start PERFKIT. When I start PERFSVM profile, I get the following reply: FCX001 Performance Toolkit for VMAutoscroll 12 FCXBAS500I Performance Toolkit for VM FL520 BASE Monitor event started -- recording is activated Monitor sample started -- recording is activated FCXPMN446E Incomplete monitor data: SAMPLE CONFIG size too small I couldn't find the sample config on the 2c2 disks.. Is it somewhere else? (The "MON" command is really great...lots of info...) Thanks for your help, Alyce
Exec errors
Hello, I'm trying to run some execs to check spool, rdr and print files on my test z/VM 5.2 system and this is what I get: SPOOL CONS * START CHECKPRT 11 +++ SPAV = X2D(SUBSTR(DIAG(8,'DISPLAY H'D2X(PGDSP+AV)),12,8)) DMSREX475E ERROR 40 RUNNING CHECKPRT EXEC, LINE 11: INCORRECT CALL TO ROUTINE READY(20040); T=0.01/0.01 10:39:19 CHECKSP 10 +++ PGAV = X2D(SUBSTR(DIAG(8,'DISPLAY H'D2X(PGDPG+AV)),12,8)) DMSREX475E ERROR 40 RUNNING CHECKSP EXEC, LINE 10: INCORRECT CALL TO ROUTINE READY(20040); T=0.01/0.01 10:39:22 CHECKRDR 11 +++ SPAV = X2D(SUBSTR(DIAG(8,'DISPLAY H'D2X(PGDSP+AV)),12,8)) DMSREX475E ERROR 40 RUNNING CHECKRDR EXEC, LINE 11: INCORRECT CALL TO ROUTINE READY(20040); T=0.01/0.01 10:39:25 They work fine on my z/VM 4.4 production system. Any ideas what I need to change to get them to work on z/VM 5.2? Thank for your help, Alyce
spoolchn/perfkit
Hello, I am currently using SPOOLCHN and RTM on my z/VM 4.4 system. I have a userid that gets xautologged by RTM daily to purge old reader files using SPOOLCHN. Since RTM doesn't run on z/VM 5.2, which module and/or part of perfkit would I xautolog to get the same results as RTM? Thanks in advance for any replies..., Alyce
SuSE SLES82
Hello, Is anyone running SLES82? If so, have you updated the timezone for the new daylight saving date of 3/11/2007 and the new standard date of 11/04/2007? Is it possible to modify a file to change the timezone? (I will be upgrading to SLES10 soon (but not before the time change)). I prefer not to add any patches to SLES82 if I can avoid it... Thanks for your help, Alyce
OpenSSH
Hello, I want to download the latest version of OpenSSH for my SuSE Linux SLES 8.2 running as a guest under z/VM. Has anyone done this recently? If so, what is the best method to do this? Thanks for your help, Alyce