Re: Checking For Maintenance
I have a *very* old Palm/Tungsten and the collapsible keyboard. It's great! I don't use it as a cell phone anymore (no need) just as a PDA, but when I want to do a lot of data entry it's a life saver. Even though it has a mechanical/electrical connection that prevents it from connecting to a charger at the same time, it's very usable. If I am ever forced to replace it, I'll certainly look for a cell phone that has a plug in keyboard option! Les Dave Jones wrote: As a matter of fact, yes...:-) I believe that there is a tremendous up-tapped market for some sort of keyboard extender for these devices, especially as the Baby Boommers age. Have a good one. DJ On 9/22/2010 3:49 PM, Rich Smrcina wrote: Using your Droid for list emails? On 09/22/2010 03:34 PM, Dave Jones wrote: Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ
Re: Checking For Maintenance
As a matter of fact, yes...:-) I believe that there is a tremendous up-tapped market for some sort of keyboard extender for these devices, especially as the Baby Boommers age. Have a good one. DJ On 9/22/2010 3:49 PM, Rich Smrcina wrote: Using your Droid for list emails? On 09/22/2010 03:34 PM, Dave Jones wrote: Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ
Re: Checking For Maintenance
Ok yeah. Bad example. But what's really in the CPLOAD you are running with or will run with at next IPL? Did you remember that you backed out by copying the module or IPLing off the CPLOLD after the op followed the backout procedures? Marcy. Sent from my BlackBerry. - Original Message - From: The IBM z/VM Operating System To: IBMVM@LISTSERV.UARK.EDU Sent: Wed Sep 22 19:28:18 2010 Subject: Re: [IBMVM] Checking For Maintenance SERVICE ALL STATUS will tell you if you ran PUT2PROD for a PTF. Here's an example: service all status PK97438 VMFSRV2760I SERVICE processing started DASD 0491 LINKED R/W; R/O BY14 USERS DASD 0492 LINKED R/W; R/O BY14 USERS VMFSRV1226I TCPIPSFS (5VMTCP40%TCPIPSFS) APAR PK97438 (PTF UK59535) status: VMFSRV1226IRECEIVED 09/07/10 13:46:16 VMFSRV1226IAPPLIED 09/07/10 13:46:18 VMFSRV1226IBUILT 09/07/10 13:47:33 VMFSRV2760I SERVICE processing completed successfully Ready; T=2.09/2.28 17:24:14 service all status um33112 VMFSRV2760I SERVICE processing started VMFSRV1226I CMSSFS (5VMCMS40%CMSSFS) PTF UM33112 status: VMFSRV1226IRECEIVED 09/07/10 09:33:36 VMFSRV1226IAPPLIED 09/07/10 09:33:38 VMFSRV1226IBUILT 09/07/10 09:34:47 VMFSRV1226IPUT2PROD 09/07/10 09:47:31 VMFSRV2760I SERVICE processing completed successfully Ready; T=1.52/1.66 17:24:20 Dennis "A slipping sear could let your M203 grenade launcher fire when you least expect it. That would make you quite unpopular in what's left of your unit." -- August 1993 issue of PS Magazine, preventive maintenance magazine of the US Army -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Marcy Cortes Sent: Wednesday, September 22, 2010 14:01 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] Checking For Maintenance Keep in mind that it tells you what service you have on your service disks. It does not tell you what you are actually running with on your run time disks or in memory. (Like in the instance you forgot to run PUT2PROD :) (Still better than MVS though :) Marcy From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of George Henke/NYLIC Sent: Wednesday, September 22, 2010 1:42 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] Checking For Maintenance ty all, Stephen, Mike, Dave: I have now tried both VMFINFO and SERVICE ALL STATUS VM.. and I must say MVS was never like this. Very nice indeed. Dave Jones Sent by: The IBM z/VM Operating System 09/22/2010 04:34 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Checking For Maintenance Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ On 9/22/2010 3:20 PM, Mike Walter wrote: > > DJ actually meant: VM*F*INFO > It's in the VMSES/E Introduction and Reference manual. Online, enter: > *HELP VMSES VMFINFO* > > My "VMSES HELPME" file, displayed by entering: HELP ME VMSES > contains: > -- > Useful commands to find z/VM service/maintenance information: > > SERVICE ALL STATUS > > SERVICE ALL STATUS ptfnumber (e.g. UM#) > > SERVICE ALL STATUS aparnumber (e.g. VM#) > > VMFINFO ZVM componentname (SETUP > - place a non-blank character to: PTFs/APARs > - press ENTER > - displayed next (in part): > PTF number .. (PF1 to select from list of PTFs) > APAR number . (PF1 to select from list of APARs) > - place the cursor on the PRT or APAR line and press PF1. Woohoo! > -- > > Mike Walter > Hewitt Associates > The opinions expressed herein are mine alone, not my employer's. > > > *"Dave Jones" * > > Sent by: "The IBM z/VM Operating System" > > 09/22/2010 03:05 PM > Please respond to > "The IBM z/VM Operating System" > > > > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > Re: Checking For Maintenance > > > > > > > > > George, try using the VMINFO tool...it's a menu driven method of seeing > what service is on your system. > > DJ > > On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > > > Sorry to ask a simple question, but . . . > > > > What is the fastest way to check that certain specific APARs and/or PTFs > > are on? > > > > The information contained in this e-mail and any accompanying documents > may contain information that is confidential or otherwise protec
Re: Checking For Maintenance
SERVICE ALL STATUS will tell you if you ran PUT2PROD for a PTF. Here's an
example:
service all status PK97438
VMFSRV2760I SERVICE processing started
DASD 0491 LINKED R/W; R/O BY14 USERS
DASD 0492 LINKED R/W; R/O BY14 USERS
VMFSRV1226I TCPIPSFS (5VMTCP40%TCPIPSFS) APAR PK97438 (PTF UK59535) status:
VMFSRV1226IRECEIVED 09/07/10 13:46:16
VMFSRV1226IAPPLIED 09/07/10 13:46:18
VMFSRV1226IBUILT 09/07/10 13:47:33
VMFSRV2760I SERVICE processing completed successfully
Ready; T=2.09/2.28 17:24:14
service all status um33112
VMFSRV2760I SERVICE processing started
VMFSRV1226I CMSSFS (5VMCMS40%CMSSFS) PTF UM33112 status:
VMFSRV1226IRECEIVED 09/07/10 09:33:36
VMFSRV1226IAPPLIED 09/07/10 09:33:38
VMFSRV1226IBUILT 09/07/10 09:34:47
VMFSRV1226IPUT2PROD 09/07/10 09:47:31
VMFSRV2760I SERVICE processing completed successfully
Ready; T=1.52/1.66 17:24:20
Dennis
"A slipping sear could let your M203 grenade launcher fire when you least
expect it. That would make you quite unpopular in what's left of your unit."
-- August 1993 issue of PS Magazine, preventive maintenance magazine of the US
Army
-Original Message-
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of Marcy Cortes
Sent: Wednesday, September 22, 2010 14:01
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] Checking For Maintenance
Keep in mind that it tells you what service you have on your service disks.
It does not tell you what you are actually running with on your run time disks
or in memory.
(Like in the instance you forgot to run PUT2PROD :)
(Still better than MVS though :)
Marcy
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf
Of George Henke/NYLIC
Sent: Wednesday, September 22, 2010 1:42 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] Checking For Maintenance
ty all, Stephen, Mike, Dave:
I have now tried both VMFINFO and SERVICE ALL STATUS VM.. and I must say
MVS was never like this.
Very nice indeed.
Dave Jones
Sent by: The IBM z/VM Operating System
09/22/2010 04:34 PM
Please respond to
The IBM z/VM Operating System
To
IBMVM@LISTSERV.UARK.EDU
cc
Subject
Re: Checking For Maintenance
Drat this small keyboardyes, Mike, there should be an extra "f" in
the command namevmfinfo.
Thanks for pointing it out.
DJ
On 9/22/2010 3:20 PM, Mike Walter wrote:
>
> DJ actually meant: VM*F*INFO
> It's in the VMSES/E Introduction and Reference manual. Online, enter:
> *HELP VMSES VMFINFO*
>
> My "VMSES HELPME" file, displayed by entering: HELP ME VMSES
> contains:
> --
> Useful commands to find z/VM service/maintenance information:
>
> SERVICE ALL STATUS
>
> SERVICE ALL STATUS ptfnumber (e.g. UM#)
>
> SERVICE ALL STATUS aparnumber (e.g. VM#)
>
> VMFINFO ZVM componentname (SETUP
> - place a non-blank character to: PTFs/APARs
> - press ENTER
> - displayed next (in part):
> PTF number .. (PF1 to select from list of PTFs)
> APAR number . (PF1 to select from list of APARs)
> - place the cursor on the PRT or APAR line and press PF1. Woohoo!
> --
>
> Mike Walter
> Hewitt Associates
> The opinions expressed herein are mine alone, not my employer's.
>
>
> *"Dave Jones" *
>
> Sent by: "The IBM z/VM Operating System"
>
> 09/22/2010 03:05 PM
> Please respond to
> "The IBM z/VM Operating System"
>
>
>
>
> To
> IBMVM@LISTSERV.UARK.EDU
> cc
>
> Subject
> Re: Checking For Maintenance
>
>
>
>
>
>
>
>
> George, try using the VMINFO tool...it's a menu driven method of seeing
> what service is on your system.
>
> DJ
>
> On 9/22/2010 2:58 PM, George Henke/NYLIC wrote:
> >
> > Sorry to ask a simple question, but . . .
> >
> > What is the fastest way to check that certain specific APARs and/or PTFs
> > are on?
>
>
>
> The information contained in this e-mail and any accompanying documents
> may contain information that is confidential or otherwise protected from
> disclosure. If you are not the intended recipient of this message, or if
> this message has been addressed to you in error, please immediately
> alert the sender by reply e-mail and then delete this message, including
> any attachments. Any dissemination, distribution or other use of the
> contents of this message by anyone other than the intended recipient is
> strictly prohibited. All messages sent to and from this e-mail
Re: Checking For Maintenance
Keep in mind that it tells you what service you have on your service disks. It does not tell you what you are actually running with on your run time disks or in memory. (Like in the instance you forgot to run PUT2PROD :) (Still better than MVS though :) Marcy From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of George Henke/NYLIC Sent: Wednesday, September 22, 2010 1:42 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] Checking For Maintenance ty all, Stephen, Mike, Dave: I have now tried both VMFINFO and SERVICE ALL STATUS VM.. and I must say MVS was never like this. Very nice indeed. Dave Jones Sent by: The IBM z/VM Operating System 09/22/2010 04:34 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Checking For Maintenance Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ On 9/22/2010 3:20 PM, Mike Walter wrote: > > DJ actually meant: VM*F*INFO > It's in the VMSES/E Introduction and Reference manual. Online, enter: > *HELP VMSES VMFINFO* > > My "VMSES HELPME" file, displayed by entering: HELP ME VMSES > contains: > -- > Useful commands to find z/VM service/maintenance information: > > SERVICE ALL STATUS > > SERVICE ALL STATUS ptfnumber (e.g. UM#) > > SERVICE ALL STATUS aparnumber (e.g. VM#) > > VMFINFO ZVM componentname (SETUP > - place a non-blank character to: PTFs/APARs > - press ENTER > - displayed next (in part): > PTF number .. (PF1 to select from list of PTFs) > APAR number . (PF1 to select from list of APARs) > - place the cursor on the PRT or APAR line and press PF1. Woohoo! > -- > > Mike Walter > Hewitt Associates > The opinions expressed herein are mine alone, not my employer's. > > > *"Dave Jones" * > > Sent by: "The IBM z/VM Operating System" > > 09/22/2010 03:05 PM > Please respond to > "The IBM z/VM Operating System" > > > > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > Re: Checking For Maintenance > > > > > > > > > George, try using the VMINFO tool...it's a menu driven method of seeing > what service is on your system. > > DJ > > On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > > > Sorry to ask a simple question, but . . . > > > > What is the fastest way to check that certain specific APARs and/or PTFs > > are on? > > > > The information contained in this e-mail and any accompanying documents > may contain information that is confidential or otherwise protected from > disclosure. If you are not the intended recipient of this message, or if > this message has been addressed to you in error, please immediately > alert the sender by reply e-mail and then delete this message, including > any attachments. Any dissemination, distribution or other use of the > contents of this message by anyone other than the intended recipient is > strictly prohibited. All messages sent to and from this e-mail address > may be monitored as permitted by applicable law and regulations to > ensure compliance with our internal policies and to protect our > business. E-mails are not secure and cannot be guaranteed to be error > free as they can be intercepted, amended, lost or destroyed, or contain > viruses. You are deemed to have accepted these risks if you communicate > with us by e-mail. >
Re: Checking For Maintenance
Using your Droid for list emails? On 09/22/2010 03:34 PM, Dave Jones wrote: Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ -- Rich Smrcina Velocity Software, Inc. Mobile: 414-491-6001 Office: 262-392-3717 http://www.velocitysoftware.com Catch the WAVV! http://www.wavv.org WAVV 2011 - April 15-19, 2011 Colorado Springs, CO
Re: Checking For Maintenance
Oh, it's come a LONG wayuse to be a real challenge. Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of George Henke/NYLIC Sent: Wednesday, September 22, 2010 3:42 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Checking For Maintenance ty all, Stephen, Mike, Dave: I have now tried both VMFINFO and SERVICE ALL STATUS VM.. and I must say MVS was never like this. Very nice indeed. Dave Jones Sent by: The IBM z/VM Operating System 09/22/2010 04:34 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Checking For Maintenance Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ On 9/22/2010 3:20 PM, Mike Walter wrote: > > DJ actually meant: VM*F*INFO > It's in the VMSES/E Introduction and Reference manual. Online, enter: > *HELP VMSES VMFINFO* > > My "VMSES HELPME" file, displayed by entering: HELP ME VMSES > contains: > -- > Useful commands to find z/VM service/maintenance information: > > SERVICE ALL STATUS > > SERVICE ALL STATUS ptfnumber (e.g. UM#) > > SERVICE ALL STATUS aparnumber (e.g. VM#) > > VMFINFO ZVM componentname (SETUP > - place a non-blank character to: PTFs/APARs > - press ENTER > - displayed next (in part): > PTF number .. (PF1 to select from list of PTFs) > APAR number . (PF1 to select from list of APARs) > - place the cursor on the PRT or APAR line and press PF1. Woohoo! > -- > > Mike Walter > Hewitt Associates > The opinions expressed herein are mine alone, not my employer's. > > > *"Dave Jones" * > > Sent by: "The IBM z/VM Operating System" > > 09/22/2010 03:05 PM > Please respond to > "The IBM z/VM Operating System" > > > > > To > IBMVM@LISTSERV.UARK.EDU > cc > > Subject > Re: Checking For Maintenance > > > > > > > > > George, try using the VMINFO tool...it's a menu driven method of seeing > what service is on your system. > > DJ > > On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > > > Sorry to ask a simple question, but . . . > > > > What is the fastest way to check that certain specific APARs and/or PTFs > > are on? > > > > The information contained in this e-mail and any accompanying documents > may contain information that is confidential or otherwise protected from > disclosure. If you are not the intended recipient of this message, or if > this message has been addressed to you in error, please immediately > alert the sender by reply e-mail and then delete this message, including > any attachments. Any dissemination, distribution or other use of the > contents of this message by anyone other than the intended recipient is > strictly prohibited. All messages sent to and from this e-mail address > may be monitored as permitted by applicable law and regulations to > ensure compliance with our internal policies and to protect our > business. E-mails are not secure and cannot be guaranteed to be error > free as they can be intercepted, amended, lost or destroyed, or contain > viruses. You are deemed to have accepted these risks if you communicate > with us by e-mail. > _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: Checking For Maintenance
ty all, Stephen, Mike, Dave: I have now tried both VMFINFO and SERVICE ALL STATUS VM.. and I must say MVS was never like this. Very nice indeed. Dave Jones Sent by: The IBM z/VM Operating System 09/22/2010 04:34 PM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Checking For Maintenance Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ On 9/22/2010 3:20 PM, Mike Walter wrote: > > DJ actually meant: VM*F*INFO > It's in the VMSES/E Introduction and Reference manual. Online, enter: > *HELP VMSES VMFINFO* > > My "VMSES HELPME" file, displayed by entering: HELP ME VMSES > contains: > -- > Useful commands to find z/VM service/maintenance information: > > SERVICE ALL STATUS > > SERVICE ALL STATUS ptfnumber (e.g. UM#) > > SERVICE ALL STATUS aparnumber (e.g. VM#) > > VMFINFO ZVM componentname (SETUP > - place a non-blank character to: PTFs/APARs > - press ENTER > - displayed next (in part): > PTF number .. (PF1 to select from list of PTFs) > APAR number . (PF1 to select from list of APARs) > - place the cursor on the PRT or APAR line and press PF1. Woohoo! > -- > > Mike Walter > Hewitt Associates > The opinions expressed herein are mine alone, not my employer's. > > > *"Dave Jones" * > > Sent by: "The IBM z/VM Operating System" > > 09/22/2010 03:05 PM > Please respond to > "The IBM z/VM Operating System" > > > > > To >IBMVM@LISTSERV.UARK.EDU > cc > > Subject >Re: Checking For Maintenance > > > > > > > > > George, try using the VMINFO tool...it's a menu driven method of seeing > what service is on your system. > > DJ > > On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > > > Sorry to ask a simple question, but . . . > > > > What is the fastest way to check that certain specific APARs and/or PTFs > > are on? > > > > The information contained in this e-mail and any accompanying documents > may contain information that is confidential or otherwise protected from > disclosure. If you are not the intended recipient of this message, or if > this message has been addressed to you in error, please immediately > alert the sender by reply e-mail and then delete this message, including > any attachments. Any dissemination, distribution or other use of the > contents of this message by anyone other than the intended recipient is > strictly prohibited. All messages sent to and from this e-mail address > may be monitored as permitted by applicable law and regulations to > ensure compliance with our internal policies and to protect our > business. E-mails are not secure and cannot be guaranteed to be error > free as they can be intercepted, amended, lost or destroyed, or contain > viruses. You are deemed to have accepted these risks if you communicate > with us by e-mail. >
Re: Checking For Maintenance
Drat this small keyboardyes, Mike, there should be an extra "f" in the command namevmfinfo. Thanks for pointing it out. DJ On 9/22/2010 3:20 PM, Mike Walter wrote: DJ actually meant: VM*F*INFO It's in the VMSES/E Introduction and Reference manual. Online, enter: *HELP VMSES VMFINFO* My "VMSES HELPME" file, displayed by entering: HELP ME VMSES contains: -- Useful commands to find z/VM service/maintenance information: SERVICE ALL STATUS SERVICE ALL STATUS ptfnumber (e.g. UM#) SERVICE ALL STATUS aparnumber (e.g. VM#) VMFINFO ZVM componentname (SETUP - place a non-blank character to: PTFs/APARs - press ENTER - displayed next (in part): PTF number .. (PF1 to select from list of PTFs) APAR number . (PF1 to select from list of APARs) - place the cursor on the PRT or APAR line and press PF1. Woohoo! -- Mike Walter Hewitt Associates The opinions expressed herein are mine alone, not my employer's. *"Dave Jones" * Sent by: "The IBM z/VM Operating System" 09/22/2010 03:05 PM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Checking For Maintenance George, try using the VMINFO tool...it's a menu driven method of seeing what service is on your system. DJ On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > Sorry to ask a simple question, but . . . > > What is the fastest way to check that certain specific APARs and/or PTFs > are on? The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: Checking For Maintenance
DJ actually meant: VMFINFO It's in the VMSES/E Introduction and Reference manual. Online, enter: HELP VMSES VMFINFO My "VMSES HELPME" file, displayed by entering: HELP ME VMSES contains: -- Useful commands to find z/VM service/maintenance information: SERVICE ALL STATUS SERVICE ALL STATUS ptfnumber (e.g. UM#) SERVICE ALL STATUS aparnumber (e.g. VM#) VMFINFO ZVM componentname (SETUP - place a non-blank character to: PTFs/APARs - press ENTER - displayed next (in part): PTF number .. (PF1 to select from list of PTFs) APAR number . (PF1 to select from list of APARs) - place the cursor on the PRT or APAR line and press PF1. Woohoo! -- Mike Walter Hewitt Associates The opinions expressed herein are mine alone, not my employer's. "Dave Jones" Sent by: "The IBM z/VM Operating System" 09/22/2010 03:05 PM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Checking For Maintenance George, try using the VMINFO tool...it's a menu driven method of seeing what service is on your system. DJ On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > Sorry to ask a simple question, but . . . > > What is the fastest way to check that certain specific APARs and/or PTFs > are on? The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: Checking For Maintenance
VMFINFO 8-) -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Dave Jones Sent: Wednesday, September 22, 2010 4:06 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Checking For Maintenance George, try using the VMINFO tool...it's a menu driven method of seeing what service is on your system. DJ On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: > > Sorry to ask a simple question, but . . . > > What is the fastest way to check that certain specific APARs and/or PTFs > are on?
Re: Checking For Maintenance
George, try using the VMINFO tool...it's a menu driven method of seeing what service is on your system. DJ On 9/22/2010 2:58 PM, George Henke/NYLIC wrote: Sorry to ask a simple question, but . . . What is the fastest way to check that certain specific APARs and/or PTFs are on?
Checking For Maintenance
Sorry to ask a simple question, but . . . What is the fastest way to check that certain specific APARs and/or PTFs are on?
