Re: [j-nsp] JunOS 10.4R8.5 on MX5? Am I forced to run 11.4+?
Wow, that sucks major meatballs, thanks for the clarification. So there might be an option to hack that into the "supported" list of hardware so the damn code will boot at least. I'll look at it if I have the time. :-) Or if we all yell high enough they might release 10.4S to support the MX5-10-40-T chassis. //T On Sun, Mar 25, 2012 at 9:56 PM, Christopher E. Brown wrote: > > > The _only_ issue is that the chassis ident is MX5-T/40-T etc... > > The ID is not in the list so JunOS refuses to finish booting. > > > We had some part numbers swapped, asked for MX80-40 in late December and > received MX40-T, just had 7 of them swapped out. (We are currently > running 10.4, no way in hell I am jumping to 11.2 or 11.4 at this time). > > > The interesting thing about this... All of the support and sales folks > I talked to have been under the impression for the last 6+ months that > the new MXxx-T units were just a grey chassis version of the MX80-T > (modular MX80 w/ timing). They all though it was just a part number > change for the re-badged/colored units. > > I stopped yelling at them when they had to go to business unit > management to find out that yes, 11.2 and later only and no there would > not be a 10.4S release that added the new chassis IDs for those of us > caught in the middle. > > > > On 3/22/12 6:19 AM, OBrien, Will wrote: >> I think it's a matter of the newer switching fabric only being supported in >> 11. >> >> Will O'Brien >> >> On Mar 22, 2012, at 8:12 AM, "Per Granath" wrote: >> >>> I suspect the 10.4 would not lock down the XE ports on the chassis, so >>> there is a reason for not allowing it to work... >>> >>> It's quite weird, especially since I can "upgrade" the system to a full MX80 with licences only, and if I do that I expect that I will be able to run my standard release (10.4R8.5) which I run on my other MX80s (which is the full MX80 btw). So basically, I feel a bit cheated that I had to "wait" for MX5 to be released when I could get a MX80-5G. I'm going to try to install 11.2R5.4 (recommended release) on it now, I do not trust a R1-release. Ever. ;-) I might also try create a technical support ticket or raise hell with my SR to try to make the 10.4-series to support MX5/10/40s unless someone else has done it already. > > > -- > > Christopher E. Brown desk (907) 550-8393 > cell (907) 632-8492 > IP Engineer - ACS > > ___ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Timh Bergström Head of System Operations Videoplaza/System Operations timh.bergst...@videoplaza.com +46 727 406 845 S:t Eriksgatan 46 Stockholm www.videoplaza.com skype: timh_bergstrom gtalk: timh.bergst...@videoplaza.com linkedin: ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] JunOS 10.4R8.5 on MX5? Am I forced to run 11.4+?
The _only_ issue is that the chassis ident is MX5-T/40-T etc... The ID is not in the list so JunOS refuses to finish booting. We had some part numbers swapped, asked for MX80-40 in late December and received MX40-T, just had 7 of them swapped out. (We are currently running 10.4, no way in hell I am jumping to 11.2 or 11.4 at this time). The interesting thing about this... All of the support and sales folks I talked to have been under the impression for the last 6+ months that the new MXxx-T units were just a grey chassis version of the MX80-T (modular MX80 w/ timing). They all though it was just a part number change for the re-badged/colored units. I stopped yelling at them when they had to go to business unit management to find out that yes, 11.2 and later only and no there would not be a 10.4S release that added the new chassis IDs for those of us caught in the middle. On 3/22/12 6:19 AM, OBrien, Will wrote: > I think it's a matter of the newer switching fabric only being supported in > 11. > > Will O'Brien > > On Mar 22, 2012, at 8:12 AM, "Per Granath" wrote: > >> I suspect the 10.4 would not lock down the XE ports on the chassis, so there >> is a reason for not allowing it to work... >> >> >>> It's quite weird, especially since I can "upgrade" the system to a full >>> MX80 >>> with licences only, and if I do that I expect that I will be able to run my >>> standard release (10.4R8.5) which I run on my other MX80s (which is the full >>> MX80 btw). >>> >>> So basically, I feel a bit cheated that I had to "wait" for MX5 to be >>> released >>> when I could get a MX80-5G. >>> >>> I'm going to try to install 11.2R5.4 (recommended release) on it now, I do >>> not >>> trust a R1-release. Ever. ;-) I might also try create a technical support >>> ticket or >>> raise hell with my SR to try to make the 10.4-series to support MX5/10/40s >>> unless someone else has done it already. -- Christopher E. Brown desk (907) 550-8393 cell (907) 632-8492 IP Engineer - ACS ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] Hurry Juniper vouchers 100 % off Valid for 100 days !!!!!!!!!!!!!!!!!!!!!
To be clear, he is selling these and not just giving them away. On Sun, Mar 25, 2012 at 10:05 AM, CCIE 2008 wrote: > *Hi all* > * > * > *If anyone interested in recertify your JNCIP-M, JNCIE-M or JNCIE-ER > credential, offering you a voucher for 100% off Junos-based > Professional-level (JNCIP) exam price - a $300 value! If you wish to remain > Juniper Networks-certified .* > * > * > > > *Unicast me fast if you need any .* > * > * > * > * > *Best regards* > ___ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- It has to start somewhere, it has to start sometime. What better place than here? What better time than now? ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] Hurry Juniper vouchers 100 % off Valid for 100 days !!!!!!!!!!!!!!!!!!!!!
*Hi all* * * *If anyone interested in recertify your JNCIP-M, JNCIE-M or JNCIE-ER credential, offering you a voucher for 100% off Junos-based Professional-level (JNCIP) exam price - a $300 value! If you wish to remain Juniper Networks-certified .* * * *Unicast me fast if you need any .* * * * * *Best regards* ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp