[j-nsp] Filter-based VLAN membership
Hi all, I'm exploring the possibility of using filter-based VLAN membership on our EX4200 edge switches. The desktop/end-user folks are looking at using Microsoft's MED-V platform to support legacy apps on a new Windows 7-based SOE. From what I can tell, MED-V is basically an instance of Windows XP running in Virtual PC. The desktop guys are telling me that dot1q-tagging the traffic from the VM isn't supported, nor can they cope operationally with NAT between the guest and host, so I'm looking at other options for separating this traffic, if for no other reason than to avoid the need to re-design the IP addressing plan to support larger subnets. There doesn't seem to be a lot of documentation out there about this feature but in playing around in the lab I have encountered a constraint that may be a showstopper for me. It doesn't seem as though a L2 VLAN can be defined with both a "mapping policy" statement and an RVI attached (l3-interface). Does that mean that filter-based VLAN membership can only be configured on L2-only switches? We have a number of offices where individual floors/levels are fed via L3/routed uplinks, so there are lots of RVIs defined on edge switches. Cheers, Dale ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] SA4000 and SA4500 hardware
Hi, I searched the Internet for information about the hardware of SA4000 and SA4500. I found nothing, so I opened one of each, breaking seals and voiding warranties. The result is at http://netbsd.itsx.net/sa.html Grtnx, -- Bert Kiers XS4ALL UNIX systeembeheerder, suspected terrorist 1984 was not meant as a manual ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] Juniper CoS - Pipe mode & Short pipe mode
Not sure how much J-series is in this but a good document covering the other platforms: http://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic- collections/config-guide-cos/config-guide-cos.pdf Phil On 7/15/13 5:44 AM, "Werner le Grange" wrote: >Greetings > >I have a requirement to preserve our clients DiffServe markings over our >MPLS network. > >I'm looking for Juniper documentation to implement either (pipe mode or >short pipe mode) on our J-series and M-series routers. > >Any useful configuration documentation will be helpful. > > >-Thanks >Werner >___ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
[j-nsp] Juniper CoS - Pipe mode & Short pipe mode
Greetings I have a requirement to preserve our clients DiffServe markings over our MPLS network. I'm looking for Juniper documentation to implement either (pipe mode or short pipe mode) on our J-series and M-series routers. Any useful configuration documentation will be helpful. -Thanks Werner ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
