MD: please help
hello , I've just returned from thailand. just fyi the prices there are more or less the same as in the states mzr900 for 300$. however on ,my return i found my mzr91 with a severe problem. with or without a disc inserted the screen shows: 1- ver 1.600 0 00 (flashing) after pressing the forward button: 2- POOR00 0 00 3- EIB 00 4- STAT00 5- ADRS00 6- BEmp00 7- 00 after pressing the volume button : 2- Manual 0 00 3- Grv 1 00 4- Lpit 2 00 5- Hpit 3 00 6- Write 4 00 7- AutCom 5 00 8- Audio 6 00 9- POWER 7 00 10- Keisu 8 00 11- OP Adj 9 00 if I press some other buttons I sometimes get other options. I might have changed some numbers/specs. does anyone know what the problem is and how to solve it? also if changing any of the values may have damaged the unit does anyone know how to restore it back to the way it should be thank you very much for any help. Yours Avner A. White. -- Ed and Roz White alternate email [EMAIL PROTECTED] - To stop getting this list send a message containing just the word "unsubscribe" to [EMAIL PROTECTED]
MD: Please help--MZR90 problem
For some reason, my MZ-R90 doesn't wanna record anymore. I suppose it has something to do with the recording laser? well, wheni try to record, the recording level meter indicates the sound is going in ok and I can hear through the headphones while it's recording but when I try to play it back right after i record it, i get nothing but silence except for a few clicks here and there. If i pop the disk out and then back in, it views the disk as blank. If put a disk with some music already on it, and put like track mark in, it'll, say it's editing the TOC but when i pop it out and back in after it's done, it says the disk is blank again. Is the recorder having trouble writing the TOC or something? or is it having trouble writing at all? what should I do? thanks in advance. Matt - To stop getting this list send a message containing just the word "unsubscribe" to [EMAIL PROTECTED]
MD: Please Help! test mode on R50
I've got an MZ-R50,which i commonly use to get into "parameter" service mode in order to bypass the SCMS. This unit has firmware version 1.3. Unfortunately, yesterday, i forgot to exit the "parameter" service mode before using the original remote. I did not realise that i was still in service mode until i've pushed and twisted the remote, thinking it was broken. By the time i did realise and reset the unit, the following changes to the operation of the remote happened: decrease volume-stop increase volume-decrease volume playmode-decrease volume display-increase volume Could somebody please, please help me out with this? Would buying the service manual be able to help me sort out this problem? Has anyone experienced this before? I did not go into the real service mode as i am afraid it would only make things worse. All other operations of the buttons on the unit and remote works fine. Regards Faizal __ Get Your Private, Free Email at http://www.hotmail.com - To stop getting this list send a message containing just the word "unsubscribe" to [EMAIL PROTECTED]
MD: PLEASE HELP re: NH-14WM batt.
I was wondering what I need to worry about for the NH-14WM battery that comes with the sony mzr-90? do i need to fully discharge the battery before i charge it or is better to "top it off" each time? will i ruin the battery if overcharge slightly? Basically, i would like to know of any ways to extend my battery life. thanks in advance Matt - To stop getting this list send a message containing just the word "unsubscribe" to [EMAIL PROTECTED]
