Re: MD: transfer to/from PC...

2001-02-27 Thread Timothy Stockman


>Maybe that new protocol over USB could also implement a true track mark
>signal.

It could also include titling, deck control, bi-directional audio transfer and such... 
 All the
stuff that the MDS-PCx decks attempt to do and more!  USB could even supply the
modest power requirements of a portable recorder, offering a true one-cable solution!
And the small size of the USB connector would only be a modest imposition on 
portability.


-
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]



Re: MD: transfer to/from PC...

2001-02-26 Thread David W. Tamkin


Timothy Stockman wrote,

| ...  MD recorders could easily handle that interruption caused by Windows
| *if* there were some sort of flow control with the transfer.  Flow control
| implies two-way communication, so S/PDIF is the wrong transfer standard,
| since it is one-way and does not contemplate how flow control might be
| implemented.  A deck with native USB (not an add-on USB to S/PDIF
| converter) could fill the bill.  ...  The first manufacturer to offer a
| *good* computer interface will provide the answer for which many have been
| searching for the last couple years...

Maybe that new protocol over USB could also implement a true track mark
signal.

-
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]



MD: transfer to/from PC...

2001-02-26 Thread Timothy Stockman


I have seen many in the Discussion Board regarding cliks, pops, buzzes, etc. when 
transfering
PC audio to/from MD.  I've experienced periodic problems myself.  The problem stems 
from the
fact that Windows has a very difficult time playing/recording audio without 
interruption.   One (or
more) of the MD manufacturers need to realize that current MD hardware exploits this 
Windows
weakness, rather than exploiting the MD strength that MD recorders can easily handle 
that
interruptiong caused by Windows *if* there was some sort of flow control with the 
transfer.
Flow control implies two-way communication, so S/PDIF is the wrong transfer standard, 
since it
is one-way and does not contemplate how flow control might be implemented.  A deck with
native USB (not an add-on USB to S/PDIF converter) colud fill the bill.  Sony's MDH-10 
did
it with SCSI, though the problems are limited SCSI availability and the MDH-10 needed 
to be
modified to allow SCSI access to audio disks.  The first manufacturer to offer a 
*good* computer
interface will provide the answer for which many have been serarching for the last 
couple years...

[Sorry if this post seems like I'm rehashing what we already know, but apparently the 
manufacters
*don't* kown it, yet.  I wonder what it will take before they learn?]


-
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]