Re: [newbie] Fw: mandrake 6.1 and xf86 bugged?
I have the same problem with you. Please share with me the solution if you get one. Thanks. - Original Message - From: Ken Davis To: [EMAIL PROTECTED] Sent: Thursday, October 14, 1999 8:50 AM Subject: mandrake 6.1 and xf86 bugged? Hi, I have a problem getting my #9 Imagine 128 series 2 4mb video card to work with Mandrake 6.1. I am also using a Hitachi superscan elite 751 (hitachi cm751 choice in setup). The problem is that during setup, the screen flashes several times, and it comes back saying it cannot set any display modes. I have used this setup in rh5.2, rh6.0 and mandrake 5.2 previously with no problems. If I goto the command prompt and run Xconfigurator I get the same type of errors during setup. During setup probe, it does detect my #9 pci card correctly. If I run startx, I get the error, "a configured device found, but display modes could not be resolved". It is also running the I128 server which is the correct server for the card. I checked the xf86 faq and it says this card is completly compatible and does not require any settings, ie ramdac and clock settings. SuperProbe also seems to correctly identify the video card. I have also deleted and re-installed several times and removed all other cards from the system except for a pci network card (which also does not work, but thats another thread), and an sb awe32. Also, during the startx screen, it shows several lines of deleting "needs hsync freq .xxx deleted" for various resolutions, it shows a line (--) I128:I128-II revision (0) (--)I128: card type: pci (**)I128: vidram: 4096k I128: ibm526 ramdac not found Any help would be greatly appreciated, thanks
Re: [newbie] Fw: mandrake 6.1 and xf86 bugged?
I have the same problem with you. Please share with me the solution if you get one. Thanks. - Original Message - From: Ken Davis To: [EMAIL PROTECTED] Sent: Thursday, October 14, 1999 8:50 AM Subject: mandrake 6.1 and xf86 bugged? Hi, I have a problem getting my #9 Imagine 128 series 2 4mb video card to work with Mandrake 6.1. I am also using a Hitachi superscan elite 751 (hitachi cm751 choice in setup). The problem is that during setup, the screen flashes several times, and it comes back saying it cannot set any display modes. I have used this setup in rh5.2, rh6.0 and mandrake 5.2 previously with no problems. If I goto the command prompt and run Xconfigurator I get the same type of errors during setup. During setup probe, it does detect my #9 pci card correctly. If I run startx, I get the error, "a configured device found, but display modes could not be resolved". It is also running the I128 server which is the correct server for the card. I checked the xf86 faq and it says this card is completly compatible and does not require any settings, ie ramdac and clock settings. SuperProbe also seems to correctly identify the video card. I have also deleted and re-installed several times and removed all other cards from the system except for a pci network card (which also does not work, but thats another thread), and an sb awe32. Also, during the startx screen, it shows several lines of deleting "needs hsync freq .xxx deleted" for various resolutions, it shows a line (--) I128:I128-II revision (0) (--)I128: card type: pci (**)I128: vidram: 4096k I128: ibm526 ramdac not found Any help would be greatly appreciated, thanks
