Re: [newbie] Sound problem
Hi all, I was lucky to get the sound working properly here also .All the distortion disappers one i run harddrrake ...any idea why, Anuerin G. Diaz wrote: > > Ivan Miranda wrote: > > >>Hi all, >>Looks like LM8.1 has serious problems configuring sound cards.Out of the >>three sytems i have installed none of them configured sound to my >>satisfaction. >> >>1)Dell optiplex GX110 (i810 motherboard with Ac97"codec and AD 1881A on >>board PCIsound ).When i start KDE the sound comes out in breaks,but >>plays mp3 files with Xmms,some file it plays with little distortion and >>some files it plays fast.I tried to disable Devfs and try stiill the >>same results >> >> > > > > same problem here with the same motherboard. The only difference is that all files > played in xmms are rendered and performed by chipmunks bloated with steroids. My > home box ( SuperRedfox board with onboard sound) does not have this problem, with > the 8.0 and 8.1 installation. > > -- > > "Programming, an artform that fights back." > > = > Anuerin G. Diaz > Design Engineer > Millennium Software, Incorporated > 25/F Equitable-PCI Tower > ADB Avenue cor. Poveda St. > Ortigas Center, Pasig City > > Tel# 638-3070 loc. 72 > Fax# 638-3079 > = > > > > -- Ivan Miranda General Instrument Engineer/IT Support [EMAIL PROTECTED] 971-4402524/4402773 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Re: Sound problem
Hi Tia , Thanks for your help.I managed to get the sound working out of my Crystal CS4236 with LM8.1 .For the benifit of the guys trying to get sound out Crystal CS4232/4235/4236B/4237B/4238B/4239 i will tell exactly what i did to get my sound working. Thanks to the writeup by Deno in MandrakeForum"ML8.1 Troubleshooting:ISA PNP card:"This was my reference. 1)Install the RPM isapnptools 1.26-4mdk 2)Use the pnpdump prog to create isapnp.conf.As root type: /sbin/pnpdump > /etc/isapnp.conf. 3)Now we have to choose the resoures.For that we have to edit the file: /etc/isapnp.conf and uncomment all lines starting with (ACT Y) and the lines listed below: (DMA0.. (DMA1... (INTO(IRQ5.. (IO 0 (Size4)(Base 0x534)) (IO 1 (Size4)(Base 0x388)) (IO 2 (Size16)(Base 0x220)) (IO 1 (Size8)(Base 0x200)) (INTO(IRQ9(Mode+E).. (IO 0 (Size2)(Base 0x330) 4)Now save the file and test the conf Type as root: /sbin/isapnp /etc/isapnp.conf .There should be no error messages,if so check your configuration once more and recheck. 5) type: modeprobe cs4232. Sound should be working,if not try logout of KDE and login. 6) To get the module loaded on boot add the line : modprobe cs4232 in: /etc/rc.d/rc.local file. then reboot.. Ivan Tia Adamson wrote: > I've had NOTHING but problems with any cards with the crystal chipset cards > with ANY distro of Linux period. Do you have AIM or ICQ? Maybe I could > help you with some other ISA soundcard stuff... > > AIM : a556789 > > Adam > - Original Message - > From: "Ivan Miranda" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: "newbie" <[EMAIL PROTECTED]> > Sent: Monday, November 19, 2001 4:51 AM > Subject: Sound problem > >>2)An Intel FX motherboard with PII 333 overdrive processor,on board >>crystal CS4236(isapnp).Here i made the isapnp.conf file as per a >>writeout in Mandrake forum and i ran sndconfig,the sound come out on the >>first test,then it gives an error while trying to play the midi sound >>and goes for manual configuration which still does not help either.What >>i could make out is that sndconfig was trying to use the kernel driver >>for opl3.o and gives an error on modprobe.Icould not find a kernel >>driver for CS4236 in the list of kernel drivers.How can i proceed now... >> >>Thanks in advance Ivan Miranda General Instrument Engineer/IT Support [EMAIL PROTECTED] 971-4402524/4402773 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Sound problem
Hi all, Looks like LM8.1 has serious problems configuring sound cards.Out of the three sytems i have installed none of them configured sound to my satisfaction. 1)Dell optiplex GX110 (i810 motherboard with Ac97"codec and AD 1881A on board PCIsound ).When i start KDE the sound comes out in breaks,but plays mp3 files with Xmms,some file it plays with little distortion and some files it plays fast.I tried to disable Devfs and try stiill the same results 2)Super motherboard BX chip set ,PIII 450,SBLive value board,it configured sound okay.Then i was bugged that there was no bass and treble controls,so installed the RPM from cooker for emu10k1 as per Mandrake Forum notes and got the controls i wanted.But now the sound does not come on when i start KDE,it starts working only after i mute and unmute the volume or pcm on the mixer and sometimes both...why is this? 2)An Intel FX motherboard with PII 333 overdrive processor,on board crystal CS4236(isapnp).Here i made the isapnp.conf file as per a writeout in Mandrake forum and i ran sndconfig,the sound come out on the first test,then it gives an error while trying to play the midi sound and goes for manual configuration which still does not help either.What i could make out is that sndconfig was trying to use the kernel driver for opl3.o and gives an error on modprobe.Icould not find a kernel driver for CS4236 in the list of kernel drivers.How can i proceed now... Thanks in advance -- Ivan Miranda General Instrument Engineer/IT Support [EMAIL PROTECTED] 971-4402524/4402773 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Sound problem with DELL Optiplex GX110
Hi all, I had Just installed LM8.1 from a LM DVD on DELL optiplex GX110,everything seems fine except the sound.When i try to play Mp3 file with Xmms,i get sound in breaks and distorted.looks like the Devfs has not configured the sound card properly.What i have is an i810 intel audio Ac97 codec.How can i disable Devfs and check whether my sound card is getting configured properly.This sound card was worlking perfectly witth LM8.0 Thanks ivan Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] grub/lilo problem
Hi all, I had installed a new Quantum SCSI 36gb harddisk with adapatec scsi card.The partion i made is as below sda1 7gb(fat32) sda2 50mb(ext2) sda3 50mb(ext2) sda5 50mb(ext2) sda6 300mb(swap) sda7 6gb (ext2) sda8 7gb (ext2) sda9 6gb (ext2) sda10 8gb (fat32) I was able to load win98 on sda1 and also i loaded boot magic for booting into different Linux distro's,then i tried to install LM8 ,with /boot on sda2,/home on sda8 and / on sda7.I installed lilo on sda2 ,when i tried to boot into LM8.0 from boot magic option,my screen is filled with 1's and 0's.I also did try GRUB boot loader,but then when i try to boot, it says grub hard disk error.When i tried to install lilo on sda1,i could not even boot from the hard disk.Experts on Lilo and Grub,pls help me to solve this. Thanks Ivan -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Ishmail
Hi all, Is there any one using ishmail for e-mails?...if so pls give me a quick lesson on how to set it up Thanks Ivan -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Acrobat reader
Hi all, I use acrobat reader to read/print pdf files in LM8.Every time i open acrobat,i get the licence agreement and every time i want to print i have to type "lpr -P lp"is there any way i can avoid these minor irritants ? Thanks Ivan -- Ivan Miranda General Instrument Engineer/ IT support Po Box 8746 ,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] format HDD
Hi all, Which prog can i use to install a new harddisk into LM8i mean,format on ext2 and then mount on to the system. -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Adding new disk
Hi all, Which prog can i use to install a new harddisk into LM8i mean,format on ext2 and then mount on to the system. -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Netscape mail
Hi all, I use Netscape messanger for e-mail.My problem is that the format of the date for the mails i receive differs,some show only time,some mails show day and time,some show all(mm/dd/yy) as a result when new mails come ,they are not arranged in an orderly mannerso it's very irritating,this was an old netscape mail problem,I tried to switch to monzilla mail,which is much better but i gave up when it started crashingany one who can help me on this Thanks ivan -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Permedia2 chip set
Hi all, I have Sony GDM 1950,this monitor does not work with normal video cards.From the net i found a couple of cards (fixed freq card) which can work with this monitor.I am planning to purchase Gemini3D 6321,AGP card(Permedia2)chip set.I had a look at mandrake hardware support and here it list the above chip set.Does anyone have this combination.i wanted to double check before buying this card. Thanks Ivan -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] LinNeighborhood
Hi , I use "xsmbrower",more comfortable with this,(there is no need to mount the shares ), on mounting one gets more acess of the directory,but i had seen them crashing after mounting at times.Also try "komba2".I don't remember the links,you should be able to get it from "rpmfind.net" Ivan civileme wrote: > > On Monday 02 July 2001 14:41, Jamie Kerwick wrote: > > I think I'm doing well, i've got my w98se box speaking to mandrake > > 8 accessing my samba shares (encrypt password = yes helps!!). The > > problem i have now is that i'm struggling to get Linux box to > > access w98 shares. I have tried 'browsing network' using LISa and > > reLISa in KDE. However, no joy. Basically the problem is that i > > don't really know what information to give it. I am attempting to > > configure in KDE Control centre, -> Look n Feel -> Lan Browsing. > > Is there a way i can mount the w98 shares on the linux box? how > > would i go about doing this. Or betting yet does anyone know of any > > good websites which give help. (i like to learn rather than follow > > blindly) > > > > Cheers > > > > Jamie > > Try LinNeighborhood > > http://www.bnro.de/~schmidjo/ > > It seems to work with all WMs very well. > > Civileme > > > ___ > >__ Get Your Private, Free E-mail from MSN Hotmail at > > http://www.hotmail.com. -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
Re: [newbie] LISa configuration
Hi , I use "xsmbrower",more comfortable with this,(there is no need to mount the shares ), on mounting one gets more acess of the directory,but i had seen them crashing after mounting at times.Also try "komba2".I don't remember the links,you should be able to get it from "rpmfind.net" Ivan civileme wrote: > > On Monday 02 July 2001 14:41, Jamie Kerwick wrote: > > I think I'm doing well, i've got my w98se box speaking to mandrake > > 8 accessing my samba shares (encrypt password = yes helps!!). The > > problem i have now is that i'm struggling to get Linux box to > > access w98 shares. I have tried 'browsing network' using LISa and > > reLISa in KDE. However, no joy. Basically the problem is that i > > don't really know what information to give it. I am attempting to > > configure in KDE Control centre, -> Look n Feel -> Lan Browsing. > > Is there a way i can mount the w98 shares on the linux box? how > > would i go about doing this. Or betting yet does anyone know of any > > good websites which give help. (i like to learn rather than follow > > blindly) > > > > Cheers > > > > Jamie > > Try LinNeighborhood > > http://www.bnro.de/~schmidjo/ > > It seems to work with all WMs very well. > > Civileme > > > ___ > >__ Get Your Private, Free E-mail from MSN Hotmail at > > http://www.hotmail.com. -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Support for Permedia2 video card
Hi all, I have Sony GDM 1950,this monitor does not work with normal video cards.From the net i found a couple of cards (fixed freq card) which can work with this monitor.I am planning to purchase Gemini3D 6321,AGP card(Permedia2)chip set.I had a look at mandrake hardware support and here it list the above chip set.Does anyone have this combination.i wanted to double check before buying this card. Thanks Ivan -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Kpp not working
Hello all, I dialup for internet by 1)From Local ISP,in Qatar(middle east),using a three digit number without a user name and password.2)Via my company acess server with username and password. I can dialup using the second method,using Kpp and it works no problem .My problem is that i cannot dialup to the local ISP,KPP insists on a username and password,however i tried the option for terminal authentication.When the modem connects,after that i sees some junk characters,when i say continue,the modem gets cutoff and PPP daemon dies .How can i overcome this problem?As per details of the ISP server,iknow they have WINNT with CHAP protocol.With windoz i can dialup and it works. Somebody can help me on this please. Thanks Ivan Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
Re: [newbie] Star office problem
Hi Romanator, I did download the new version of drakfont,however,i could not install any windows fonts (i have win2k on NTFS).How can i mount an NTFS partion ?.However i copied some fonts from widows m/c, all are *.ttf font,but while i was trying to install those fonts, drakfont gives error message like this for all fonts: "font /usr/X11R6/lib/X11/fonts/drakfont/78640___.ttf: unknown usWeightClass 5" How can i proceed now ? Thanks in advance Ivan > ivan miranda wrote: > > > > Hi all, > > I have installed a power pack version of LM8.Staroffice works > > fine,java okay,but the fonts...awafullhow can i correct > > this.Earlier,i have corrected the fonts problem in LM8 and the > > browsers,by removing the existing abisuite and installing a newer > > version.The second problem is that i have an HP5000 series laser printer > > on the network.The staroffice printer menu does not include this how can > > use this printer?The same printer was configured in cups is working > > fine(samba printer).Thanks in advace for the help > > > > Ivan > > > > Ivan, > > Select the Software manager and download the drafont 0.5-13mdk update > TrueType Fonts manager. Install the Windows fonts. > Navigate to Control Center->Look'N'Feel->Fonts. For fixed width I'm > using lucidatypewriter. I also use a combination of Helvetica and > Verdana 10 and 11 pts. > > Roman > Registered Linux User #179293 > Email Powered By Tux Email Utility -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] Star office problem
Hi all, I have installed a power pack version of LM8.Staroffice works fine,java okay,but the fonts...awafullhow can i correct this.Earlier,i have corrected the fonts problem in LM8 and the browsers,by removing the existing abisuite and installing a newer version.The second problem is that i have an HP5000 series laser printer on the network.The staroffice printer menu does not include this how can use this printer?The same printer was configured in cups is working fine(samba printer).Thanks in advace for the help Ivan -- Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380
[newbie] LM8.0 installation
I ordered a LM8.0,however to my dismay,I could not proceed form one step of installation.The boot CD will boot ,after loading the Ram disk and it gives error and aborts the installation.I confirmed that it was a CD problem.However LM support choose to ignore all my e-mails and fax asking for a replacement CDnot even a reply in spite of quoting my registration ID.Then i spent three full days trying to down load cd1...and finally suceeded. My next problem is that ,the software cannot mount the SCSI cd drive.The SCSI card i have is BUSlogic BT-946C.The CD boots from the drive,BUs logic card is detected then it gives me an error saying "no Cdrom device found".I tried to boot from a boot disk made with windoz and booted from it.Here also the SCSI card was detected,then i get an error saying"I could not mount a CD on device /dev/scd0".The CDrom i have is plexter PX-8XCS.However LM7.2 loads and runs verywell in this same setup. I need some help on this. - Ivan Miranda General Instrument Engineer/IT support Po Box 8746,Doha,Qatar Ph:974-4402524/4402773 Fax:974-4323380